Sony KDL-50WF660 manual

Sony KDL-50WF660
6.4 · 1
PDF manual
 · 44 pages
English
manualSony KDL-50WF660
6
GB

D:\SONY TV\SY18_CP_EU_IM_111\4729423111_GB\020REG.fm masterpage: Left

KDL-50WF6xx / 43WF6xx / 43RF4xx

4-729-423-11(1)

For children

• Do not allow children to climb on the TV set.
Keep small accessories out of the reach of children, so that they
are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the mains lead immediately if any
of the following problems occur.
Ask your dealer or Sony service centre to have it checked by
qualified service personnel.

When:

• Mains lead is damaged.
• Poor fitting of mains socket.
• TV set is damaged by being dropped, hit or having something
thrown at it.
• Any liquid or solid object falls through openings in the cabinet.

About LCD TV Temperature

When the LCD TV is used for an extended period, the panel
surrounds become warm. You may feel hot when touching there
by the hand.

Viewing the TV

View the TV in moderate light, as viewing the TV in poor light or
during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision
technology and 99.99 % or more of the pixels are effective,
black dots may appear or bright points of light (red, blue, or
green) may appear constantly on the LCD screen. This is a
structural property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may be
damaged.
• If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate a
failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
The screen and cabinet get warm when this TV set is in use. This
is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Follow
your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/

cabinet of the TV set

Be sure to unplug the mains lead connected to the TV set from
mains socket before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never spray water or detergent directly on
the TV set. It may drip to the bottom of the
screen or exterior parts and enter the TV
set, and may cause damage to the TV set.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder, or
volatile solvent, such as alcohol, benzene,
thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in
damage to the screen surface and cabinet material.
• Periodic vacuuming of the ventilation openings is
recommended to ensure proper ventilation.
• When adjusting the angle of the TV set, move it slowly so as to
prevent the TV set from moving or slipping off from its table
stand.

Optional Equipment

• Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
• This equipment has been tested and found to comply with the
limits set out in the EMC Directive using a connection signal
cable shorter than 3 meters.
• This equipment has been tested and found to comply with the
limits set out in the EMC Directive using a RF cable shorter than
30 meters for terrestrial/satellite/CATV terminal.

Recommendation of F type plug

Projection of the inner wire from the connection part must be less
than 1.5 mm.

Caution about handling the remote control

• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old and
new batteries.
• Dispose of batteries in an environmentally friendly way. Certain
regions may regulate the disposal of batteries. Please consult
your local authority.
• Handle the remote control with care. Do not drop or step on it,
or spill liquid of any kind onto it.
Do not place the remote control in a location near a heat source,
a place subject to direct sunlight, or a damp room.

Wireless Function of the unit

• Do not operate this unit near medical equipment (pacemaker,
etc.), as this may result in the malfunction of the medical
equipment.
• Although this unit transmits/receives scrambled signals, be
careful of unauthorised interception. We cannot be responsible
for any trouble as a result.
• This equipment should be installed and operated keeping a
separation distance of 20 cm or more between the antenna of
this device and a person's body.

Precautions

1.5 mm max.
(Reference drawing of the F type plug)
7 mm max.

Manual

View the manual for the Sony KDL-50WF660 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Sony KDL-50WF660 or do you need help? Ask your question here

Need help?

Do you have a question about the Sony and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Sony KDL-50WF660 specifications

Below you will find the product specifications and the manual specifications of the Sony KDL-50WF660.

General
BrandSony
ModelKDL-50WF660 | KDL50WF660BAEP
Producttelevision
EAN4548736076525
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal50 "
Display diagonal (metric)125.7 cm
HD typeFull HD
Display resolution1920 x 1080 pixels
Display technologyLED
Display brightness- cd/m²
Response time- ms
Motion interpolation technologyMotionflow 400 Hz
Native refresh rate50 Hz
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1920 x 1080 (HD 1080)
LED backlighting typeDirect-LED
Screen shapeFlat
Peak luminance ratio76 %
Weight & dimensions
Width (without stand)1130 mm
Width (with stand)1130 mm
Depth (without stand)68 mm
Height (without stand)660 mm
Depth (with stand)268 mm
Height (with stand)717 mm
Weight (without stand)11000 g
Weight (with stand)11400 g
Packaging data
Package width1226 mm
Package depth148 mm
Package height782 mm
Package weight16000 g
Package typeBox
Other features
A
Annual energy consumption117 kWh
3DNo
Built-in speaker(s)Yes
Peak Illuminator ProYes
Supported file systemsFAT16, FAT32, NTFS
Batteries includedYes
Power
Power consumption (max)117 W
Power consumption (standby)0.5 W
Power consumption (typical)80 W
AC input voltage220 - 240 V
AC input frequency50 Hz
TV tuner
Tuner typeAnalog & digital
Analog signal format system-
Digital signal format systemDVB-C, DVB-T
Supported TV bandsUHF, VHF
Smart TV
Smart TVYes
Operating system installedLinux
Internet TVYes
Screen mirroringYes
Smart modesCinema, Custom, Game, Graphics, Photo, Sports, Standard, Vivid
Audio
Number of speakers2
RMS rated power10 W
Audio decodersDTS, Dolby Digital, DTS Digital Surround, Dolby Digital Plus, Dolby Digital Pulse
Network
Wi-FiYes
Ethernet LANYes
BrowsingYes
Web browserYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Design
Product colorBlack, Silver
Heavy metals freeHg (mercury)
Mercury content0 mg
2018
VESA mountingYes
Panel mounting interface200 x 200 mm
On/off switchYes
Performance
Teletext functionYes
Subtitles functionYes
24p supportYes
USB recordingYes
Picture processing technologySony X-Reality PRO
High Dynamic Range (HDR) supportedYes
Ports & interfaces
HDMI ports quantity2
PC in (D-Sub)Yes
Audio Return Channel (ARC)Yes
HDCPYes
DVI portNo
DVI-D ports quantity0
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Component video (YPbPr/YCbCr) in0
Composite video in1
Headphone outputs1
RF ports quantity1
Common interface (CI)-
Common interface Plus (CI+)Yes
S-Video inputs quantity0
Management features
Electronic Program Guide (EPG)Yes
On Screen Display (OSD)Yes
Number of OSD languages32
On Screen Display (OSD) languagesBOS, BUL, CAT, CRO, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, KAZ, LAT, LIT, MAC, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Sleep timerYes
On/Off timerYes
Packaging content
Handheld remote controlYes
Cables includedAC
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony KDL-50WF660 below.

What's the best viewing distance for my Sony television?

The ideal viewing distance for your Sony television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the Sony KDL-50WF660?

The screen size of the Sony KDL-50WF660 is 50 ".

What is the screen resolution of the display of the Sony KDL-50WF660?

The screen resolution of the Sony KDL-50WF660 is 1920 x 1080 pixels.

Is Sony KDL-50WF660 a Full HD television?

Yes, Sony KDL-50WF660 is a Full HD television with a display resolution of 1920 x 1080 pixels. This means that it delivers high-quality and detailed images, providing a great viewing experience for the user.

Does Sony KDL-50WF660 have 3D functionality?

No, Sony KDL-50WF660 does not have 3D functionality. However, this may not be a drawback for users who do not prioritize 3D viewing, as it still offers a high-quality display and other important features.

Is Sony KDL-50WF660 energy efficient?

Yes, Sony KDL-50WF660 is energy efficient as it has an energy efficiency class of A. This means that it consumes relatively low power, reducing energy costs and being environmentally friendly.

What is the power consumption of Sony KDL-50WF660 in standby mode?

The power consumption of Sony KDL-50WF660 in standby mode is 0.5 W. This is considered low power consumption, which is beneficial for users concerned about minimizing energy usage.

How does the height of Sony KDL-50WF660 with and without the stand differ?

The height of Sony KDL-50WF660 without the stand is 660 mm, while with the stand it is 717 mm. This means that the stand adds an additional height of 57 mm. Users should consider these measurements when selecting an appropriate placement location for the television.

How do I connect external devices to the Sony KDL-50WF660 television?

To connect external devices to the Sony KDL-50WF660 television, follow these steps: 1. Identify the available input/output jacks on the TV. These may include antenna (aerial)/cable, HDMI IN, PC input, audio output, USB port, CAM (Conditional Access Module) slot, and more. Refer to the connection diagram in the manual for specific details. 2. Determine the type of connection required for your external device. For example, if you want to connect a DVD player, check if it has an HDMI output or AV output (RCA). 3. Use the appropriate cable to connect the external device to the corresponding input jack on the TV. For HDMI connections, use an HDMI cable. For AV connections, use RCA cables (red, white, and yellow). 4. Ensure that both the TV and the external device are powered on. 5. Use the TV remote to select the appropriate input source. Press the "Input" or "Source" button and choose the input corresponding to the connected device (e.g., HDMI 1, AV 1). 6. If necessary, adjust the settings on the external device to ensure proper output to the TV. This may involve selecting the correct resolution or audio output format. 7. Test the connection by playing content on the external device. The TV should display the video and output the audio from the connected device. By following these steps, you can successfully connect external devices to your Sony KDL-50WF660 television.

Why is there no sound coming from the Sony KDL-50WF660 television?

There are several possible reasons why there may be no sound coming from the Sony KDL-50WF660 television. Here are some troubleshooting steps to try: 1. Check the volume settings on the TV. Press the "+" or "-" buttons on the remote control or check if the TV is muted by pressing the "Mute" button. 2. Verify that the speakers are selected as the audio output source. Go to the "AV Setup" menu and ensure that the "Speakers" option is set to "TV Speakers". 3. Make sure that the headphone plug is not connected to the TV. If a headphone is connected, the TV's speakers may be automatically disabled. 4. Check the TV system settings. Go to the "System Settings" menu and ensure that the TV system setting is appropriate for your region or country. 5. If you are using external devices such as a cable box or DVD player, ensure that they are properly connected to the TV and that their volume settings are adjusted correctly. 6. If none of the above steps resolve the issue, try performing a power reset by unplugging the TV from the power source, waiting for a few minutes, and then plugging it back in. By following these troubleshooting steps, you should be able to identify and resolve the issue of no sound coming from the Sony KDL-50WF660 television.

How do I use the digital optical jack on the Sony KDL-50WF660 television?

To use the digital optical jack on the Sony KDL-50WF660 television, follow these steps: 1. Turn on the device you want to connect to the TV, such as a soundbar or audio system. 2. Press the "Input" or "Source" button on the TV remote to display the input source options. 3. Use the arrow buttons on the remote to select the desired input source. 4. Connect one end of an optical audio cable to the digital optical output (OPTICAL) on the TV. 5. Connect the other end of the optical audio cable to the digital optical input on the external device. 6. Ensure that both the TV and the external device are powered on. 7. Use the remote control of the external device to adjust the volume and settings as needed. 8. To output audio through the digital optical connection, select the corresponding input source on the TV. By following these steps, you can use the digital optical jack on the Sony KDL-50WF660 television to connect and enjoy audio from external devices.

What are the power requirements for the Sony KDL-50WF660 television?

The power requirements for the Sony KDL-50WF660 television are not explicitly mentioned in the available manual. However, I can provide you with some general information about power requirements for televisions. 1. The Sony KDL-50WF660 television operates on standard AC power. It is designed to work with a voltage range of 220-240 volts. 2. The television consumes power when it is turned on and in use. The power consumption may vary depending on the settings and usage. 3. To ensure safe and efficient operation, it is recommended to connect the TV to a stable power source and use the provided power cord. 4. It is important to follow the safety guidelines mentioned in the manual regarding the use of electrical equipment and power supply. Please note that specific power requirements may vary depending on the region and country where the TV is being used. It is always advisable to refer to the user manual or contact Sony customer support for detailed information regarding the power requirements of the Sony KDL-50WF660 television.

How do I change the display resolution on the Sony KDL-50WF660 television?

To change the display resolution on the Sony KDL-50WF660 television, follow these steps: 1. Press the "Options" button on the remote control. 2. Use the arrow buttons to navigate to the "Screen" or "Display" menu. 3. Select the "Screen Format" option. 4. Use the arrow buttons to choose the desired screen format, such as "Wide Zoom," "Normal," "Full," or "Zoom." 5. Press the "Enter" or "OK" button to confirm the selection. 6. If necessary, adjust other display settings such as "Auto Format," "Auto Display Area," "Display Area," "Horizontal Shift," "Vertical Shift," or "Vertical Size" to further customize the display. 7. To optimize the display for a connected PC, select the "PC Settings" option and choose the appropriate screen format. By following these steps, you can change the display resolution and adjust other display settings on the Sony KDL-50WF660 television to suit your preferences and viewing needs.

Is the manual of the Sony KDL-50WF660 available in English?

Yes, the manual of the Sony KDL-50WF660 is available in English .

Is your question not listed? Ask your question here

No results