Sony KDL-50WF660 manual

Sony KDL-50WF660
6.4 · 1
PDF manual
 · 44 pages
English
manualSony KDL-50WF660
3
GB
D:\SONY TV\SY18_CP_EU_IM_111\4729423111_GB\020REG.fm masterpage: Right
KDL-50WF6xx / 43WF6xx / 43RF4xx
4-729-423-11(1)

Introduction

Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and
retain it for future reference.
Note
• Before operating the TV, please read the “Safety Information”
(page 3).
• Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the actual
product.
• The “xx” that appears in the model name corresponds to a
numeric digit, related to design, colour or TV system.

Attaching the Table-Top Stand to the TV

Refer to the Setup Guide on top of the cushion.

Location of the identification label

Labels for the TV Model No., Production Date (year/month) and
Power Supply rating are located on the rear of the TV or package.
For models with supplied mains adaptor:
Labels for the mains adaptor Model No. and Serial No. are located
on the bottom of the mains adaptor.

WARNING

TO PREVENT THE

SPREAD OF FIRE, KEEP

CANDLES OR OTHER OPEN

FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

NOTICE FOR CUSTOMERS IN THE UNITED

KINGDOM

A moulded plug complying with BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug supplied need to be replaced with the
same rating of fuse approved by ASTA or BSI to BS 1362 (i.e.,
marked with
or ) must be used.
If the plug supplied with this equipment has a detachable fuse
cover, be sure to attach the fuse cover after you change the fuse.
Never use the plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony service station.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and
replace the fuse.
Please refer to the illustration that actually equipped with the
product.

Notice for Radio Equipment

Hereby, Sony Visual Products Inc. declares that
the radio equipment types KDL-50WF665,
KDL-50WF663, KDL-50WF660, KDL-43WF665,
KDL-43WF663, KDL-43WF660, KDL-43RF455, KDL-43RF453,
KDL-43RF450 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.compliance.sony.de/
This radio equipment can be operated in the EU without
infringing applicable requirements on the use of radio spectrum.

WARNING

Caution
Risk of explosion if the battery is replaced by an incorrect type.
Batteries must not be exposed to excessive heat such as
sunshine, fire or the like or extremely low air pressure that can
result in an explosion or leakage of flammable liquid or gas.
Stability Hazard
The television set may fall, causing serious personal injury or
death.
Never place a television set in an unstable location. A television
set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
Using cabinets or stands recommended by the manufacturer of
the television set.
Only using furniture that can safely support the television set.
Internet Connection and Data Privacy
This product connects to the internet during initial setup as
soon as a network is connected in order to confirm internet
connection, and later to configure the Home screen. Your IP
address is used in these and all other internet connections. If
you do not want your IP address be used at all, do not set-up
the wireless internet function and do not connect an internet
cable. Please refer to the privacy information presented in the
set-up screens for further details of internet connections.

Help Guide (Manual) (Only on limited

region/country/TV model)

For more detailed information, press HOME on the remote
control, then select [Help Guide] under [Settings] menu. You
can also check the Help Guide from your PC or smartphone
(information provided on the back cover).

IMPORTANT NOTICE

This product has been manufactured by or on behalf of Sony
Visual Products Inc.
EU Importer: Sony Europe Limited.
Inquiries to the EU Importer or related to product compliance
in Europe should be sent to the manufacturer's authorized
representative, Sony Belgium, bijkantoor van Sony Europe
Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium.

Safety Information

FUSE

Manual

View the manual for the Sony KDL-50WF660 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Sony KDL-50WF660 or do you need help? Ask your question here

Need help?

Do you have a question about the Sony and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Sony KDL-50WF660 specifications

Below you will find the product specifications and the manual specifications of the Sony KDL-50WF660.

General
BrandSony
ModelKDL-50WF660 | KDL50WF660BAEP
Producttelevision
EAN4548736076525
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal50 "
Display diagonal (metric)125.7 cm
HD typeFull HD
Display resolution1920 x 1080 pixels
Display technologyLED
Display brightness- cd/m²
Response time- ms
Motion interpolation technologyMotionflow 400 Hz
Native refresh rate50 Hz
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions1920 x 1080 (HD 1080)
LED backlighting typeDirect-LED
Screen shapeFlat
Peak luminance ratio76 %
Weight & dimensions
Width (without stand)1130 mm
Width (with stand)1130 mm
Depth (without stand)68 mm
Height (without stand)660 mm
Depth (with stand)268 mm
Height (with stand)717 mm
Weight (without stand)11000 g
Weight (with stand)11400 g
Packaging data
Package width1226 mm
Package depth148 mm
Package height782 mm
Package weight16000 g
Package typeBox
Other features
A
Annual energy consumption117 kWh
3DNo
Built-in speaker(s)Yes
Peak Illuminator ProYes
Supported file systemsFAT16, FAT32, NTFS
Batteries includedYes
Power
Power consumption (max)117 W
Power consumption (standby)0.5 W
Power consumption (typical)80 W
AC input voltage220 - 240 V
AC input frequency50 Hz
TV tuner
Tuner typeAnalog & digital
Analog signal format system-
Digital signal format systemDVB-C, DVB-T
Supported TV bandsUHF, VHF
Smart TV
Smart TVYes
Operating system installedLinux
Internet TVYes
Screen mirroringYes
Smart modesCinema, Custom, Game, Graphics, Photo, Sports, Standard, Vivid
Audio
Number of speakers2
RMS rated power10 W
Audio decodersDTS, Dolby Digital, DTS Digital Surround, Dolby Digital Plus, Dolby Digital Pulse
Network
Wi-FiYes
Ethernet LANYes
BrowsingYes
Web browserYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Design
Product colorBlack, Silver
Heavy metals freeHg (mercury)
Mercury content0 mg
2018
VESA mountingYes
Panel mounting interface200 x 200 mm
On/off switchYes
Performance
Teletext functionYes
Subtitles functionYes
24p supportYes
USB recordingYes
Picture processing technologySony X-Reality PRO
High Dynamic Range (HDR) supportedYes
Ports & interfaces
HDMI ports quantity2
PC in (D-Sub)Yes
Audio Return Channel (ARC)Yes
HDCPYes
DVI portNo
DVI-D ports quantity0
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Component video (YPbPr/YCbCr) in0
Composite video in1
Headphone outputs1
RF ports quantity1
Common interface (CI)-
Common interface Plus (CI+)Yes
S-Video inputs quantity0
Management features
Electronic Program Guide (EPG)Yes
On Screen Display (OSD)Yes
Number of OSD languages32
On Screen Display (OSD) languagesBOS, BUL, CAT, CRO, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, KAZ, LAT, LIT, MAC, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Sleep timerYes
On/Off timerYes
Packaging content
Handheld remote controlYes
Cables includedAC
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony KDL-50WF660 below.

What's the best viewing distance for my Sony television?

The ideal viewing distance for your Sony television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the Sony KDL-50WF660?

The screen size of the Sony KDL-50WF660 is 50 ".

What is the screen resolution of the display of the Sony KDL-50WF660?

The screen resolution of the Sony KDL-50WF660 is 1920 x 1080 pixels.

Is Sony KDL-50WF660 a Full HD television?

Yes, Sony KDL-50WF660 is a Full HD television with a display resolution of 1920 x 1080 pixels. This means that it delivers high-quality and detailed images, providing a great viewing experience for the user.

Does Sony KDL-50WF660 have 3D functionality?

No, Sony KDL-50WF660 does not have 3D functionality. However, this may not be a drawback for users who do not prioritize 3D viewing, as it still offers a high-quality display and other important features.

Is Sony KDL-50WF660 energy efficient?

Yes, Sony KDL-50WF660 is energy efficient as it has an energy efficiency class of A. This means that it consumes relatively low power, reducing energy costs and being environmentally friendly.

What is the power consumption of Sony KDL-50WF660 in standby mode?

The power consumption of Sony KDL-50WF660 in standby mode is 0.5 W. This is considered low power consumption, which is beneficial for users concerned about minimizing energy usage.

How does the height of Sony KDL-50WF660 with and without the stand differ?

The height of Sony KDL-50WF660 without the stand is 660 mm, while with the stand it is 717 mm. This means that the stand adds an additional height of 57 mm. Users should consider these measurements when selecting an appropriate placement location for the television.

How do I connect external devices to the Sony KDL-50WF660 television?

To connect external devices to the Sony KDL-50WF660 television, follow these steps: 1. Identify the available input/output jacks on the TV. These may include antenna (aerial)/cable, HDMI IN, PC input, audio output, USB port, CAM (Conditional Access Module) slot, and more. Refer to the connection diagram in the manual for specific details. 2. Determine the type of connection required for your external device. For example, if you want to connect a DVD player, check if it has an HDMI output or AV output (RCA). 3. Use the appropriate cable to connect the external device to the corresponding input jack on the TV. For HDMI connections, use an HDMI cable. For AV connections, use RCA cables (red, white, and yellow). 4. Ensure that both the TV and the external device are powered on. 5. Use the TV remote to select the appropriate input source. Press the "Input" or "Source" button and choose the input corresponding to the connected device (e.g., HDMI 1, AV 1). 6. If necessary, adjust the settings on the external device to ensure proper output to the TV. This may involve selecting the correct resolution or audio output format. 7. Test the connection by playing content on the external device. The TV should display the video and output the audio from the connected device. By following these steps, you can successfully connect external devices to your Sony KDL-50WF660 television.

Why is there no sound coming from the Sony KDL-50WF660 television?

There are several possible reasons why there may be no sound coming from the Sony KDL-50WF660 television. Here are some troubleshooting steps to try: 1. Check the volume settings on the TV. Press the "+" or "-" buttons on the remote control or check if the TV is muted by pressing the "Mute" button. 2. Verify that the speakers are selected as the audio output source. Go to the "AV Setup" menu and ensure that the "Speakers" option is set to "TV Speakers". 3. Make sure that the headphone plug is not connected to the TV. If a headphone is connected, the TV's speakers may be automatically disabled. 4. Check the TV system settings. Go to the "System Settings" menu and ensure that the TV system setting is appropriate for your region or country. 5. If you are using external devices such as a cable box or DVD player, ensure that they are properly connected to the TV and that their volume settings are adjusted correctly. 6. If none of the above steps resolve the issue, try performing a power reset by unplugging the TV from the power source, waiting for a few minutes, and then plugging it back in. By following these troubleshooting steps, you should be able to identify and resolve the issue of no sound coming from the Sony KDL-50WF660 television.

How do I use the digital optical jack on the Sony KDL-50WF660 television?

To use the digital optical jack on the Sony KDL-50WF660 television, follow these steps: 1. Turn on the device you want to connect to the TV, such as a soundbar or audio system. 2. Press the "Input" or "Source" button on the TV remote to display the input source options. 3. Use the arrow buttons on the remote to select the desired input source. 4. Connect one end of an optical audio cable to the digital optical output (OPTICAL) on the TV. 5. Connect the other end of the optical audio cable to the digital optical input on the external device. 6. Ensure that both the TV and the external device are powered on. 7. Use the remote control of the external device to adjust the volume and settings as needed. 8. To output audio through the digital optical connection, select the corresponding input source on the TV. By following these steps, you can use the digital optical jack on the Sony KDL-50WF660 television to connect and enjoy audio from external devices.

What are the power requirements for the Sony KDL-50WF660 television?

The power requirements for the Sony KDL-50WF660 television are not explicitly mentioned in the available manual. However, I can provide you with some general information about power requirements for televisions. 1. The Sony KDL-50WF660 television operates on standard AC power. It is designed to work with a voltage range of 220-240 volts. 2. The television consumes power when it is turned on and in use. The power consumption may vary depending on the settings and usage. 3. To ensure safe and efficient operation, it is recommended to connect the TV to a stable power source and use the provided power cord. 4. It is important to follow the safety guidelines mentioned in the manual regarding the use of electrical equipment and power supply. Please note that specific power requirements may vary depending on the region and country where the TV is being used. It is always advisable to refer to the user manual or contact Sony customer support for detailed information regarding the power requirements of the Sony KDL-50WF660 television.

How do I change the display resolution on the Sony KDL-50WF660 television?

To change the display resolution on the Sony KDL-50WF660 television, follow these steps: 1. Press the "Options" button on the remote control. 2. Use the arrow buttons to navigate to the "Screen" or "Display" menu. 3. Select the "Screen Format" option. 4. Use the arrow buttons to choose the desired screen format, such as "Wide Zoom," "Normal," "Full," or "Zoom." 5. Press the "Enter" or "OK" button to confirm the selection. 6. If necessary, adjust other display settings such as "Auto Format," "Auto Display Area," "Display Area," "Horizontal Shift," "Vertical Shift," or "Vertical Size" to further customize the display. 7. To optimize the display for a connected PC, select the "PC Settings" option and choose the appropriate screen format. By following these steps, you can change the display resolution and adjust other display settings on the Sony KDL-50WF660 television to suit your preferences and viewing needs.

Is the manual of the Sony KDL-50WF660 available in English?

Yes, the manual of the Sony KDL-50WF660 is available in English .

Is your question not listed? Ask your question here

No results