View the manual for the Sony KD-55XF7004 here, for free. This manual comes under the category televisions and has been rated by 3 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Sony KD-55XF7004 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Sony KD-55XF7004.





| Brand | Sony |
| Model | KD-55XF7004 | KD-55XF7004 |
| Product | television |
| EAN | 4548736077447 |
| Language | English |
| Filetype | User manual (PDF) |
| Cables included | AC |
| Handheld remote control | Yes |
| Desktop stand | Yes |
| Batteries included | Yes |
| Supported file systems | FAT16, FAT32, NTFS |
| Built-in speaker(s) | Yes |
| Languages support | CAT, CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, KAZ, LIT, NOR, POL, POR, RUM, RUS, SLK, SLV, SWE, UKR |
| A | |
| Annual energy consumption | 162 kWh |
| 3D | No |
| Hybrid Log-Gamma (HLG) | Yes |
| Manual | Yes |
| Quick installation guide | Yes |
| Package width | 1348 mm |
| Package depth | 160 mm |
| Package height | 833 mm |
| Package weight | 24000 g |
| Quick start guide | Yes |
| Product color | Black |
| VESA mounting | Yes |
| Panel mounting interface | 200 x 200 mm |
| On/off switch | - |
| Mercury content | 0 mg |
| Display diagonal | 55 " |
| Display diagonal (metric) | 138.8 cm |
| Screen shape | Flat |
| Display resolution | 3840 x 2160 pixels |
| LED backlighting type | Direct-LED |
| Peak luminance ratio | 73 % |
| HD type | 4K Ultra HD |
| Display technology | LCD |
| Display brightness | - cd/m² |
| Response time | - ms |
| Motion interpolation technology | Motionflow XR 100 Hz |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p |
| Contrast ratio (typical) | - |
| Width (without stand) | 1242 mm |
| Depth (without stand) | 80 mm |
| Height (without stand) | 721 mm |
| Width (with stand) | 1242 mm |
| Depth (with stand) | 356 mm |
| Height (with stand) | 784 mm |
| Weight (with stand) | 17400 g |
| Weight (without stand) | 16200 g |
| Stand width | 1003 mm |
| Wi-Fi | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Ethernet LAN | Yes |
| Miracast | Yes |
| Web browser | Yes |
| Bluetooth | No |
| Browser supported | Vewd |
| Ethernet LAN (RJ-45) ports | 1 |
| RF ports quantity | 1 |
| Component video (YPbPr/YCbCr) in | - |
| Composite video in | 1 |
| HDMI ports quantity | 3 |
| HDCP | Yes |
| Audio Return Channel (ARC) | Yes |
| Headphone outputs | 1 |
| USB 2.0 ports quantity | 3 |
| Common interface Plus (CI+) | Yes |
| Common interface (CI) | - |
| S-Video inputs quantity | - |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | - |
| DVI port | - |
| DVI-D ports quantity | - |
| PC in (D-Sub) | - |
| Mobile High-Definition Link (MHL) | No |
| Screen mirroring | Yes |
| Smart TV | Yes |
| Internet TV | - |
| Operating system installed | Linux |
| Smart modes | Cinema, Custom, Game, Graphics, Sports, Standard, Vivid |
| USB recording | Yes |
| Video formats supported | AVCHD, AVI, M-JPEG, MKV, MP4, MPEG1, MPEG2-PS, MPEG2-TS, WEBM, WMV9, XVID |
| Audio formats supported | MP3, WAV |
| Picture processing technology | Sony Live Colour, Sony X-Reality PRO |
| Teletext function | Yes |
| Subtitles function | Yes |
| Image formats supported | JPEG |
| Game mode | Yes |
| Noise reduction | - |
| High Dynamic Range (HDR) supported | Yes |
| High Dynamic Range (HDR) technology | Hybrid Log-Gamma (HLG) |
| Number of speakers | 2 |
| RMS rated power | 20 W |
| Audio decoders | Dolby Digital AC4, DTS Digital Surround, Dolby Digital, Dolby Digital Plus, Dolby Pulse |
| Sound modes | Cinema, Music, Sports, Standard |
| On/Off timer | Yes |
| Sleep timer | Yes |
| Electronic Program Guide (EPG) | Yes |
| Picture-in-Picture | - |
| Power consumption (typical) | 111 W |
| Power consumption (max) | 183 W |
| Power consumption (standby) | 0.5 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy saving mode | Yes |
| Tuner type | Analog & digital |
| Analog signal format system | SECAM B/G, SECAM D/K |
| Digital signal format system | DVB-C, DVB-T, DVB-T2 |
| Number of tuners | 1 tuner(s) |
| Supported TV bands | UHF, VHF |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony KD-55XF7004 below.
The ideal viewing distance for your Sony television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
The screen size of the Sony KD-55XF7004 is 55 ".
The screen resolution of the Sony KD-55XF7004 is 3840 x 2160 pixels.
Yes, the Sony KD-55XF7004 comes with a remote control. This provides convenience for users to control the television from a distance without needing to manually operate the device.
The display diagonal of the Sony KD-55XF7004 is 55 inches or 138.8 cm. This size ensures an immersive viewing experience for users, allowing them to enjoy their favorite content on a large screen.
Yes, the Sony KD-55XF7004 supports VESA mounting with a panel mounting interface of 200 x 200 mm. This gives users the option to mount the television on a wall, saving space and providing flexibility in positioning.
Yes, the Sony KD-55XF7004 has Wi-Fi connectivity. This enables users to connect the television to their home network wirelessly, allowing access to online streaming services, browsing the internet, and other online functionalities.
The Sony KD-55XF7004 has 1 Ethernet LAN (RJ-45) port. This allows users to connect the television directly to the internet using a wired connection, providing a stable and reliable network connection for streaming and other online activities.
To troubleshoot if the Sony KD-55XF7004 television is not turning on, follow these steps: 1. Check the power source: Ensure that the television is properly plugged into a working power outlet. Verify that the power cord is securely connected to both the television and the power outlet. 2. Check the power indicator: Look for the power indicator light on the television. If the light is not illuminated or is blinking, it may indicate a power issue. Try unplugging the television from the power outlet, waiting for a few minutes, and then plugging it back in. If the power indicator still does not light up, proceed to the next step. 3. Check the remote control: Press the power button on the remote control to turn on the television. If the television does not respond, try replacing the batteries in the remote control and try again. If the remote control still does not work, proceed to the next step. 4. Perform a power reset: Unplug the television from the power outlet and wait for at least one minute. Then, plug it back in and try turning it on again. This can help reset any temporary power issues. 5. Contact customer support: If the television still does not turn on after following these steps, it may indicate a more significant problem. Contact Sony customer support for further assistance and troubleshooting. Remember to always refer to the Sony KD-55XF7004 television's user manual for specific instructions and troubleshooting steps.
To troubleshoot if there is no sound coming from the Sony KD-55XF7004 television, follow these steps: 1. Check the volume level: Press the volume up button on the remote control or the television itself to ensure that the volume is not set to the lowest level or muted. 2. Check the audio settings: Press the "Home" button on the remote control, navigate to the "Settings" menu, and select "Sound" or "Audio" settings. Make sure that the audio output is set to the desired option (e.g., TV speakers, external speakers, or audio system). 3. Check the audio cables: If you have external speakers or audio devices connected to the television, ensure that the audio cables are securely plugged into the correct ports. Try unplugging and re-plugging the cables to ensure a proper connection. 4. Restart the television: Turn off the television and unplug it from the power outlet. Wait for a few minutes, then plug it back in and turn it on again. This can help reset any temporary audio issues. 5. Perform a factory reset: If the above steps do not resolve the issue, you can try performing a factory reset. However, note that this will reset all settings and preferences on the television, so make sure to back up any important data before proceeding. Refer to the user manual for instructions on how to perform a factory reset. If the issue persists after following these steps, it is recommended to contact Sony customer support for further assistance.
To troubleshoot if the Sony KD-55XF7004 television is not connecting to the CATV network, follow these steps: 1. Check the CATV cable connection: Ensure that the CATV cable is securely connected to the television's CATV input port. Make sure there are no loose or damaged connections. 2. Check the CATV signal strength: Press the "Home" button on the remote control, navigate to the "Settings" menu, and select "Channel" or "Signal" settings. Look for the signal strength or signal quality indicators. If the signal strength is weak or the quality is poor, it may affect the CATV network connection. 3. Rescan for channels: In the same "Channel" or "Signal" settings menu, select the option to rescan for channels. This will refresh the channel list and search for available CATV channels. 4. Check the CATV network settings: If the television has advanced CATV network settings, ensure that the correct network type (e.g., cable, antenna) is selected. You may also need to enter any necessary network settings, such as frequency or modulation. 5. Contact your CATV service provider: If the issue persists after following these steps, it is recommended to contact your CATV service provider for further assistance. They can check the network status and provide specific troubleshooting steps for your CATV network setup. Remember to always refer to the Sony KD-55XF7004 television's user manual for specific instructions and troubleshooting steps.
To troubleshoot if the Sony KD-55XF7004 television is not displaying any picture, follow these steps: 1. Check the connections: Ensure that the HDMI or AV cables are securely connected to both the television and the external device (e.g., cable box, DVD player). Make sure the correct input source is selected on the television. 2. Check the power: Verify that the television is turned on and receiving power. Look for the power indicator light on the television. If it is not illuminated, check the power cord and outlet. 3. Adjust the display settings: Press the "Home" button on the remote control, navigate to the "Settings" menu, and select "Display" or "Picture" settings. Make sure the brightness, contrast, and other display settings are properly adjusted. 4. Perform a power reset: Turn off the television and unplug it from the power outlet. Wait for a few minutes, then plug it back in and turn it on again. This can help reset any temporary display issues. 5. Contact customer support: If the issue persists after following these steps, it may indicate a more significant problem. Contact Sony customer support for further assistance and troubleshooting. Remember to always refer to the Sony KD-55XF7004 television's user manual for specific instructions and troubleshooting steps.
To troubleshoot if the Sony KD-55XF7004 television is not receiving power, follow these steps: 1. Check the power cord: Ensure that the power cord is securely plugged into the television and the power outlet. Make sure there are no loose connections or damage to the cord. 2. Verify the power outlet: Test the power outlet by plugging in another device to see if it receives power. If the outlet is not working, try plugging the television into a different outlet. 3. Check the power indicator: Look for the power indicator light on the television. If the light is not illuminated, it may indicate a power issue. Try unplugging the television from the power outlet, waiting for a few minutes, and then plugging it back in. If the power indicator still does not light up, proceed to the next step. 4. Try a different power cord: If possible, try using a different power cord to rule out any issues with the original cord. 5. Contact customer support: If the television still does not receive power after following these steps, it may indicate a more significant problem. Contact Sony customer support for further assistance and troubleshooting. Remember to always refer to the Sony KD-55XF7004 television's user manual for specific instructions and troubleshooting steps.
Yes, the manual of the Sony KD-55XF7004 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Sony and is the answer not in the manual?
Question and answer
Number of questions: 1hi- how can I add more apps to the TV settings?