Solac FM6720 manual

Solac FM6720
8 · 3
PDF manual
 · 55 pages
English
manualSolac FM6720
FREIDORA INSTRUCCIONES DE USO
DEEP FRYER INSTRUCTIONS FOR USE
FRITEUSE MODE D’EMPLOI
FRITTEUSE GEBRAUCHSANLEITUNG
FRITADEIRA INSTRUÇÕES DE USO
FRIGGITRICE ISTRUZIONI PER L’USO
FRITEUSE GEBRUIKSAANWIJZING
FRITOVACÍ HRNEC VOD K POUZITÍ
FRYTKOWNICA INSTRUCJA OBSLUGI
FRITOVACÍ HRNIEC VOD NA POUZITIU
OLAJSÜTŐ HASZNÁLATI UTASÍTÁS
ФРИТЮРНИК инструкция за употреба
FRITEZA UPUTE ZA UPOTREBU

MOD. FM6720

Solac is a registered Trade Mark 1/06
Freidora FM 6720-V1 2 26/1/06, 17:40:43

Manual

View the manual for the Solac FM6720 here, for free. This manual comes under the category deep fryers and has been rated by 3 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Solac FM6720 or do you need help? Ask your question here

Need help?

Do you have a question about the Solac and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Solac FM6720 specifications

Below you will find the product specifications and the manual specifications of the Solac FM6720.

General
BrandSolac
ModelFM6720 | FM6720
Productdeep fryer
EAN8414636101840
LanguageEnglish
FiletypeUser manual (PDF)
Design
Construction typeSingle
Non-slip feetYes
Easy to cleanYes
Viewing windowNo
Automatic lid releaseNo
Detachable, hinged lidYes
Dishwasher-proof partsYes
Cool wall housingYes
Product colorGreen, Silver
MaterialStainless steel
Cord storageYes
Removable filterYes
Performance
Oil content2 L
Power
Power1650 W
AC input frequency50 Hz
AC input voltage230 V
Indication
Illuminated on/off switchYes
Temperature-ready indicatorYes
Other features
FilterAnti-grease metal
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Solac FM6720 below.

When should I replace the fryer oil or fat?

The oil or fat should be replaced after frying 5 to 7 times.

Can I use a scouring pad to clean the fryer?

No, this can damage the protective layer. Use only the gentle side of a sponge.

Is oil or fat healthier for frying?

Oil is low in saturated fat and is therefore healthier than fat.

Does the Solac FM6720 have a detachable, hinged lid?

Yes, the Solac FM6720 has a detachable, hinged lid. This makes it easier for the user to access the inside of the fryer and clean it.

Are the parts of the Solac FM6720 dishwasher-proof?

Yes, the parts of the Solac FM6720 are dishwasher-proof. This means that the user can easily clean them by placing them in the dishwasher.

Does the Solac FM6720 have a viewing window?

No, the Solac FM6720 does not have a viewing window. The user will not be able to see the progress of the food being fried without opening the lid.

Is the Solac FM6720 easy to clean?

Yes, the Solac FM6720 is easy to clean. The detachable, hinged lid and dishwasher-proof parts make it convenient for the user to maintain the fryer's cleanliness.

Does the Solac FM6720 have a cool wall housing?

Yes, the Solac FM6720 has a cool wall housing. This ensures that the external surface of the fryer remains cool to the touch, reducing the risk of burns for the user.

How do I ensure the deep fryer is safely plugged into a socket with suitable earth connection?

To ensure the Solac FM6720 deep fryer is safely plugged into a socket with a suitable earth connection, follow these steps: 1. Check the voltage: Before plugging in the deep fryer, make sure the voltage matches the specifications mentioned in the user manual. This information can usually be found on the label or the bottom of the appliance. 2. Locate a suitable socket: Find a socket that is easily accessible and close to the area where you will be using the deep fryer. Ensure that the socket is in good condition and has a proper earth connection. 3. Plug in the deep fryer: Insert the plug of the deep fryer into the socket firmly. Make sure it is fully inserted and secure. 4. Test the connection: Once the deep fryer is plugged in, check if it is receiving power by looking for any indicator lights or displays on the control panel. This will confirm that the connection is successful. 5. Avoid using extension cords: It is recommended to directly plug the deep fryer into a socket without using extension cords or adapters. This helps to maintain a stable and safe electrical connection. By following these steps, you can ensure that the Solac FM6720 deep fryer is safely plugged into a socket with a suitable earth connection.

What should I do if the deep fryer's safety thermostat cuts off the power due to abnormal overheating?

If the Solac FM6720 deep fryer's safety thermostat cuts off the power due to abnormal overheating, follow these steps: 1. Unplug the fryer: Immediately unplug the deep fryer from the mains to disconnect the power supply. 2. Allow cooling: Let the deep fryer cool down completely. This will help prevent any further overheating and allow the appliance to reset. 3. Press the safety system button: Locate the safety system button on the deep fryer. It is usually labeled and can be identified by its distinctive shape. Use a screwdriver or a similar tool to press the button. 4. Plug in and check: After pressing the safety system button, plug the deep fryer back into the mains. Ensure that it is securely connected. Check if the fryer works correctly by looking for any indicator lights or displays on the control panel. 5. Seek professional assistance if needed: If the problem persists and the deep fryer continues to cut off power due to abnormal overheating, it is recommended to take the appliance to a Technical Service shop for further inspection and repair. By following these steps, you can address the issue of the safety thermostat cutting off the power due to abnormal overheating in the Solac FM6720 deep fryer.

How do I dispose of the deep fryer properly?

To dispose of the Solac FM6720 deep fryer properly, follow these steps: 1. Unplug the fryer: Ensure that the deep fryer is unplugged from the power source before starting the disposal process. 2. Allow cooling: Let the deep fryer cool down completely. This will help prevent any accidental burns during the disposal process. 3. Store with lid closed: Store the deep fryer with its lid closed to prevent dust or other products from deteriorating the oil or fat inside. 4. Dispose of oil or fat: The discarded oil or fat should not be thrown down the WC or the sink. Instead, put them into a closed container and take them to a suitable rubbish container or waste collection point. This ensures proper treatment and contributes to environmental protection. 5. Proper appliance disposal: When you wish to dispose of the deep fryer itself, never throw it in the regular rubbish. Instead, take it to your nearest clean point or waste collection point, where it will receive subsequent treatment. By following these steps, you can ensure the proper disposal of the Solac FM6720 deep fryer and contribute to environmental sustainability.

What should I do if the oil level in the deep fryer is too low?

If the oil level in the Solac FM6720 deep fryer is too low, follow these steps: 1. Turn off the deep fryer: Ensure that the deep fryer is turned off and unplugged from the power source before adjusting the oil level. 2. Allow cooling: Let the deep fryer cool down for a few minutes to avoid any potential burns while handling the oil. 3. Add more oil: Carefully pour additional oil into the fryer, making sure not to exceed the maximum fill line indicated in the fryer's interior. Use a suitable oil for frying, such as vegetable oil or sunflower oil. 4. Heat the fryer: Once the oil level is adjusted, plug in the deep fryer and turn it on. Set the desired temperature according to the recipe or cooking instructions. 5. Monitor the oil level: Keep an eye on the oil level during the frying process. If the oil level drops significantly due to absorption or evaporation, you may need to add more oil to maintain the desired level. By following these steps, you can address the issue of a low oil level in the Solac FM6720 deep fryer and ensure optimal frying results.

How do I clean the main components of the deep fryer?

To clean the main components of the Solac FM6720 deep fryer, follow these steps: 1. Lid: Remove the lid from the deep fryer by lifting it gently. Clean the lid with warm soapy water and a soft cloth or sponge. Rinse it thoroughly and dry it before reattaching it to the fryer. 2. Control panel: Use a damp cloth or sponge to wipe the control panel of the deep fryer. Avoid getting water or cleaning solutions into the control panel to prevent damage. Dry the control panel thoroughly after cleaning. 3. Stainless steel vat: Empty the vat of any remaining oil or food particles. Fill the vat with warm soapy water and let it soak for a few minutes. Use a non-abrasive sponge or brush to scrub the vat, paying attention to any stubborn stains. Rinse the vat thoroughly with clean water and dry it completely. 4. Handles and basket: Clean the handles and basket of the deep fryer with warm soapy water and a sponge. Rinse them well and dry them thoroughly before reassembling them. 5. Draining stand and cord compartment: Wipe the draining stand and cord compartment with a damp cloth to remove any grease or residue. Dry them completely before using or storing the deep fryer. By following these steps, you can effectively clean the main components of the Solac FM6720 deep fryer and maintain its performance and hygiene.

Is the manual of the Solac FM6720 available in English?

Yes, the manual of the Solac FM6720 is available in English .

Is your question not listed? Ask your question here

No results