Snom M80 manual

Snom M80
9.9 · 1
PDF manual
 · 2 pages
English
manualSnom M80

M80 Handset

BATTERYPAC K
Alarm button Alarm-Taste Touche alarm
Tasto allerta Boton alarma
© 2019 Snom Technology GmbHAll Rights Reserved.
Dati tecnici
Banda radio: 1880-1900 MHz (EMEA), 1910-1930 MHz (LATAM),
1920-1930 MHZ (US)
Tipo di batteria: Lithium-Ion 1100mAH, 3.7 V, 4.1 W
Autonomia in conversazione: WB ca. 12 ore (banda larga), NB ca. 17 ore (banda stretto)
Autonomia in stand-by: Ca. 200 ore
Caricare la batteria: Da 0% a 100% fino a 6 ore
Cua: 3,5 mm connettore jack
Caricabatterie: Con cavo USB tipo A; input 5VDC 2000mA
Alimentatore: AC/DC, ingresso 100-240V AC 50-60Hz, uscita 5V DC 2000mA,
jack USB tipo A
Sicurezza: IEC 60950
È possibile scaricare la dichiarazione di conformità su www.snom.com/conformity. Per
informazioni sull‘installazione e sull‘utilizzo del telefono cordless, consultare il manuale
d‘uso disponibile all‘indirizzo www.snom.com.
Prima di utilizzare il dispositivo, leggere attentamente il documento "Informazione
Importante" contenuto nella busta di plastica trasparente.
ITALIANO
Datos técnicos
Banda de frecuencia: 1880-1900 MHz (EMEA), 1910-1930 MHz (LATAM),
1920-1930 MHZ (US)
Tipo de batería: Lithium-Ion 1100mAH, 3.7 V, 4.1 W
Autonomía en conversación: Banda ancha ca. 12 horas, banda estrecha ca. 17 horas
Autonomía en stand-by: Ca. 200 horas
Carga de batería: De 0% a 100% hasta 6 horas
Auricular: 3,5 mm conector Jack
Cargador: Con cable USB tipo A; corriente de entrada 5VDC 2000mA
Fuente de alimentación: AC/DC, entrada 100-240V AC 50-60Hz, salida 5V DC 2000mA,
jack USB tipo A
Seguridad: IEC 60950
Puede descargar la declaración de conformidad en www.snom.com/conformity. Para
mayor información sobre la configuración y utilización del aparato, consulte el manual del
usuario disponible en la sección producto de nuestra página web www.snom.com.
Antes de usar el dispositivo, lea cuidadosamente el documento "Información Importan-
te" que se encuentra en la bolsa de plástico transparente.
ESPAÑOL
Caractéristiques techniques
Bande de fréquences: 1880-1900 MHz (EMEA), 1910-1930 MHz (LATAM),
1920-1930 MHZ (US)
Type de batterie: Lithium-Ion 1100mAH, 3.7 V, 4.1 W
Temps de communication -
Autonomie WB: Env. 12 heures (large bande)
Autonomie NB: Env. 17 heures (bande étroite)
Autonomie Standby: Env. 200 heures
Durée du chargement: De 0% à 100% jusqu‘à 6 heures
Branchement casque: 3,5 mm jack (prise)
Chargeur: Prise USB type A, câble intégré; courant d‘entrée 5VDC 2000mA
Bloc d‘alimentation: AC/DC, courant d‘entrée 100-240V AC 50-60Hz, sortie 5V DC
2000mA, jack USB type A
Sécurité: IEC 60950
Vous pouvez télécharger la déclaration de conformité sur www.snom.com/conformity.
Pour les informations sur la configuration et l‘utilisation du combiné, consultez le mode
d‘emploi qui peux être téléchargé du page du produit sur notre page web, www.snom.com.
Avant toute première utilisation de cet appareil, veuillez lire les consignes sur la feuille
«Informations importantes» qui se trouve dans l'enveloppe en plastique transparent.
FRANÇAIS
1
BATTERY PACK
5
BATTERY PACK
2
6
4
BATTERY PACKPull
tab
8
6 hrs
v2019010
3
BATTERY PACK
Pull
tab
Delivery content Lieferumfang Contenu de la boîte
Contenuto della confezione En la caja
A
Handset features Merkmale Caractéristiques Caratteristiche
Características
C
Charging the battery Akku laden
Charger l'accu Caricare la batteria Carga la battería
B
7
4 1

View the manual for the Snom M80 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Snom M80 or do you need help? Ask your question here

Need help?

Do you have a question about the Snom and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandSnom
ModelM80 | 00004424
Productphone
EAN0811819012791, 4260059582797
LanguageEnglish
FiletypeQuickstart Guide (PDF), Datasheet (PDF)
Technical details
TypeDECT telephone handset
Caller IDYes
Brand compatibilitysnom
SpeakerphoneYes
Multi base capabilityNo
Multi handset capability-
Headphone connectivity3.5 mm
Input voltage5 V
Design
Product colorBlack
Display typeLCD
Display diagonal2 "
Display resolution240 x 320 pixels
Display number of colors262144 colors
Backlight displayYes
Backlight buttonsYes
Weight & dimensions
Weight138 g
Width48 mm
Depth22 mm
Height122 mm
Packaging content
Charging base-
Operational conditions
Operating temperature (T-T)-10 - 55 °C
Battery
Battery technologyLithium-Ion (Li-Ion)
Talk time17 h
Standby time200 h
Logistics data
Harmonized System (HS) code85177900
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Snom M80 below.

What is the weight of the Snom M80?

The Snom M80 has a weight of 138 g.

What is the screen size of the Snom M80?

The screen size of the Snom M80 is 2 ".

What is the height of the Snom M80?

The Snom M80 has a height of 122 mm.

What is the screen resolution of the display of the Snom M80?

The screen resolution of the Snom M80 is 240 x 320 pixels.

What is the width of the Snom M80?

The Snom M80 has a width of 48 mm.

What is the depth of the Snom M80?

The Snom M80 has a depth of 22 mm.

Does the Snom M80 have caller ID?

Yes, the Snom M80 has caller ID. This allows users to easily see who is calling them before answering the phone.

Is the Snom M80 compatible with other snom brand devices?

Yes, the Snom M80 is compatible with other snom brand devices. This means users can easily integrate it with their existing snom phone system.

Does the Snom M80 have a speakerphone feature?

Yes, the Snom M80 has a speakerphone feature. This allows users to have hands-free conversations or conference calls on the phone.

Can the Snom M80 connect to multiple bases?

No, the Snom M80 does not have multi base capability. This means it can only be connected to one base station at a time.

What is the talk time and standby time of the Snom M80?

The talk time of the Snom M80 is 17 hours and the standby time is 200 hours. This provides users with a long-lasting battery life, allowing them to use the phone for extended periods without needing to recharge.

How do I troubleshoot the speakerphone not working on my Snom M80 phone?

To troubleshoot the speakerphone not working on your Snom M80 phone, you can follow these steps: 1. Check the speakerphone settings: Press the "Speakerphone" button on your Snom M80 phone to ensure that the speakerphone is turned on. If it is already on, try turning it off and then back on again to reset the settings. 2. Adjust the volume: Use the volume keys on the Snom M80 phone to increase the volume of the speakerphone. Make sure that the volume is not set to the lowest level. 3. Check for any physical obstructions: Inspect the speakerphone area on your Snom M80 phone for any dirt, debris, or physical obstructions that may be blocking the sound. Clean the speakerphone area gently with a soft cloth if necessary. 4. Restart the phone: Sometimes, a simple restart can resolve software-related issues. Turn off your Snom M80 phone, wait for a few seconds, and then turn it back on again. 5. Test with a headset: Connect a headset to your Snom M80 phone and check if the audio is working properly. If the audio is clear through the headset, there may be an issue with the speakerphone hardware. If the issue persists after following these troubleshooting steps, it is recommended to contact Snom customer support for further assistance.

Why am I unable to accept calls on my Snom M80 phone?

To troubleshoot why you are unable to accept calls on your Snom M80 phone, you can follow these steps: 1. Check the call settings: Ensure that the call settings on your Snom M80 phone are configured correctly. Go to the "Settings" menu and navigate to the "Call Settings" or "Phone Settings" option. Verify that the call acceptance settings, such as call forwarding or call barring, are not enabled or misconfigured. 2. Check the network signal: Make sure that your Snom M80 phone has a strong network signal. Poor network coverage or weak signal strength can affect the phone's ability to accept calls. Move to an area with better network reception or try restarting your phone to refresh the network connection. 3. Check for call blocking: Check if you have accidentally blocked any incoming calls on your Snom M80 phone. Go to the "Settings" menu and look for the "Call Blocking" or "Blocked Numbers" option. Remove any numbers that you may have blocked unintentionally. 4. Restart the phone: Sometimes, a simple restart can resolve temporary software glitches. Turn off your Snom M80 phone, wait for a few seconds, and then turn it back on again. This can help refresh the phone's system and potentially resolve any issues with call acceptance. If the issue persists after following these troubleshooting steps, it is recommended to contact Snom customer support for further assistance.

What should I do if I can't find the settings menu on my Snom M80 phone?

If you can't find the settings menu on your Snom M80 phone, you can try the following steps: 1. Access the main screen: Make sure you are on the main screen of your Snom M80 phone. This is the screen that displays the date, time, and signal strength. 2. Look for the settings icon: On the main screen, look for an icon that represents the settings menu. It is usually represented by a gear or a wrench symbol. The location of the settings icon may vary depending on the phone's user interface. 3. Swipe or scroll through screens: If you don't see the settings icon on the main screen, try swiping left or right or scrolling up or down to navigate through different screens. The settings icon may be located on a different screen. 4. Use the search function: If you still can't find the settings menu, you can use the search function on your Snom M80 phone. Swipe down from the top of the screen to access the search bar, and type in "settings" or "menu" to search for the settings menu directly. If you have followed these steps and still cannot find the settings menu on your Snom M80 phone, it is recommended to refer to the user manual or contact Snom customer support for further assistance.

How can I troubleshoot issues with ending calls on my Snom M80 phone?

To troubleshoot issues with ending calls on your Snom M80 phone, you can follow these steps: 1. Check the call end button: Ensure that you are pressing the correct button to end calls on your Snom M80 phone. Look for a dedicated "End Call" button, which is usually represented by a red phone icon or a handset symbol. Press this button to end the call. 2. Check for screen lock: If you are unable to end calls by pressing the end call button, check if your Snom M80 phone's screen is locked. Unlock the screen by swiping or entering the unlock code, and then try ending the call again. 3. Restart the phone: Sometimes, a simple restart can resolve temporary software issues. Turn off your Snom M80 phone, wait for a few seconds, and then turn it back on again. This can help refresh the phone's system and potentially resolve any issues with call ending. 4. Update the firmware: Ensure that your Snom M80 phone is running the latest firmware version. Check the Snom website for any available firmware updates and follow the instructions to update your phone's firmware. Firmware updates can often fix bugs and improve the overall performance of the phone. If the issue persists after following these troubleshooting steps, it is recommended to contact Snom customer support for further assistance.

What should I do if the navigation keys on my Snom M80 phone are not functioning properly?

To troubleshoot issues with the navigation keys on your Snom M80 phone, you can try the following steps: 1. Check for physical obstructions: Inspect the navigation keys on your Snom M80 phone for any dirt, debris, or physical obstructions that may be affecting their functionality. Clean the keys gently with a soft cloth if necessary. 2. Restart the phone: Sometimes, a simple restart can resolve temporary software glitches. Turn off your Snom M80 phone, wait for a few seconds, and then turn it back on again. This can help refresh the phone's system and potentially resolve any issues with the navigation keys. 3. Update the firmware: Ensure that your Snom M80 phone is running the latest firmware version. Check the Snom website for any available firmware updates and follow the instructions to update your phone's firmware. Firmware updates can often fix bugs and improve the overall performance of the phone, including the navigation keys. 4. Contact customer support: If the navigation keys on your Snom M80 phone are still not functioning properly after following these steps, it is recommended to contact Snom customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary.

Is the manual of the Snom M80 available in English?

Yes, the manual of the Snom M80 is available in English .

Is your question not listed? Ask your question here

No results