View the manual for the Smeg SNLK61MX9 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Smeg SNLK61MX9 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Smeg SNLK61MX9.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg SNLK61MX9 below.
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.
No, cooking on induction is not dangerous.
To properly clean and maintain the Smeg SNLK61MX9 stove, follow these steps: 1. Cleaning the Surfaces: - After each use, allow the surfaces to cool down before cleaning. - Use specific cleaning products that do not contain abrasives or chlorine-based acids. - Pour the product onto a damp cloth and wipe the surfaces. - Rinse thoroughly and dry with a soft cloth or a microfiber cloth. 2. Removing Food Stains or Residues: - Do not use steel sponges or sharp scrapers, as they can damage the surface. - Use normal, non-abrasive products and a wooden or plastic tool if necessary. - Rinse thoroughly and dry with a soft cloth or a microfiber cloth. - Avoid allowing residues of sugary foods, such as jam, to set inside the oven, as they may damage the enamel lining. 3. Cleaning the Cooking Hob Grids: - Remove the grids and clean them in lukewarm water with non-abrasive detergent. - Remove any encrustations. - Dry them thoroughly and return them to the hob. 4. Cleaning Flame-Spreader Crowns and Burner Caps: - For easier cleaning, remove the flame-spreader crowns and burner caps. - Wash them in hot water with non-abrasive detergent. - Carefully remove any encrustation and ensure they are perfectly dry before replacing them. 5. Cleaning Igniters and Thermocouples: - Check the igniters and thermocouples frequently and clean them with a damp cloth if necessary. - Remove any dry residues with a wooden toothpick or a needle. 6. Cleaning Knobs: - Clean the knobs with a soft cloth dampened with warm water. - Dry them carefully. - If needed, the knobs can be removed by pulling them out from their housings. 7. Removing the Door: - For easier cleaning, remove the door and place it on a tea towel. - Open the door completely and insert two pins into the holes on the hinges. - Follow the specific instructions in the manual for removing the door. Remember to always use cleaning products recommended by the manufacturer and avoid using aggressive products or materials that can cause damage. Regular cleaning and maintenance will help keep your Smeg SNLK61MX9 stove in good condition.
If the Smeg SNLK61MX9 stove is not heating up properly, you can try the following steps: 1. Check the Flame-Spreader Crowns and Burner Caps: - Ensure that the flame-spreader crowns are correctly positioned in their housings with their respective burner caps. - Make sure there are no obstructions or blockages in the burner caps or flame-spreader crowns. 2. Verify the Gas Supply: - Ensure that the gas supply to the stove is turned on and that there are no issues with the gas line or gas pressure. - If you suspect a gas supply issue, contact a qualified technician to inspect and resolve the problem. 3. Clean the Burners: - Remove the burner caps and flame-spreader crowns. - Clean them thoroughly using a non-abrasive detergent and a soft cloth. - Remove any debris or residue that may be affecting the burner's performance. - Ensure that the burner ports are clear and free from any blockages. 4. Check the Igniters: - Inspect the igniters for any signs of damage or dirt buildup. - Clean the igniters gently using a damp cloth. - Ensure that the igniters are properly aligned with the burner ports. 5. Verify the Power Supply: - If the stove has electric components, ensure that it is properly connected to a power source. - Check the circuit breaker or fuse box to ensure that there are no tripped breakers or blown fuses. If the issue persists after following these steps, it is recommended to contact Smeg customer support or a qualified technician for further assistance.
To ensure the safety of using the Smeg SNLK61MX9 stove, follow these steps: 1. Read the User Manual: - Familiarize yourself with the user manual and follow all instructions provided by the manufacturer. - Pay special attention to safety warnings, operating procedures, and maintenance guidelines. 2. Proper Installation: - Ensure that the stove is installed by a qualified technician according to the manufacturer's instructions. - Verify that the stove is placed on a stable and level surface, away from flammable materials. 3. Ventilation: - Ensure that the kitchen area is well-ventilated to prevent the accumulation of gas or fumes. - Keep the ventilation system clean and free from obstructions. 4. Gas Safety: - If the stove operates on gas, regularly check for gas leaks by using a soapy water solution on the gas connections. - If you detect a gas leak, immediately turn off the gas supply and contact a qualified technician. 5. Safe Operation: - Never leave the stove unattended while it is in use. - Use appropriate cookware that matches the size of the burners to prevent overheating and spills. - Keep flammable materials, such as curtains or paper towels, away from the stove while it is in use. 6. Child Safety: - Keep children away from the stove and ensure they are supervised when in the kitchen. - Use child safety locks or controls to prevent accidental operation by children. 7. Regular Maintenance: - Clean the stove regularly and remove any grease or food residues that may pose a fire hazard. - Inspect the stove for any signs of damage or wear and tear, and promptly address any issues. By following these steps, you can ensure the safe and proper use of the Smeg SNLK61MX9 stove.
The identification plate on the Smeg SNLK61MX9 stove can be found by following these steps: 1. Locate the Back or Side Panel: - Look at the back or side panel of the stove, where the identification plate is typically located. - The plate may be positioned on the back panel, near the top or bottom, or on one of the side panels. 2. Check the Upper or Lower Section: - If the identification plate is on the back panel, it is usually located in the upper or lower section. - Look for a metal plate with engraved or printed information. 3. Inspect the Side Panels: - If the identification plate is on one of the side panels, check both the left and right sides of the stove. - Look for a metal plate with relevant details about the appliance. 4. Look for Engraved or Printed Information: - The identification plate typically contains important information such as the model number, serial number, and brand name. - It may also include technical specifications, such as voltage, power rating, and gas type. 5. Take Note of the Information: - Once you have located the identification plate, make a note of the relevant details, such as the model number and serial number. - This information may be required for warranty registration, service requests, or future reference. By following these steps, you should be able to locate the identification plate on the Smeg SNLK61MX9 stove.
If you encounter any issues while following the instructions in the user manual for the Smeg SNLK61MX9 stove, you can try the following steps: 1. Check the General Safety Instructions: - Review the general safety instructions provided in the user manual to ensure that you are following all necessary precautions. 2. Verify the Manufacturer Liability: - Understand the manufacturer's liability and ensure that you are using the appliance as intended and following all guidelines. 3. Consult the Identification Plate: - Locate the identification plate on the stove, typically found on the appliance's back or side panel. - Refer to the information on the identification plate for any specific instructions or troubleshooting tips. 4. Read the User Manual Carefully: - Review the user manual thoroughly, paying attention to the specific section related to the issue you are facing. - Follow the instructions provided in the manual to troubleshoot and resolve the problem. 5. Seek Additional Support: - If the issue persists or you require further assistance, contact Smeg customer support or a qualified technician. - Provide them with the necessary details, such as the model number and a description of the issue, for accurate guidance. By following these steps, you can address any issues you encounter while using the Smeg SNLK61MX9 stove and ensure proper troubleshooting and resolution.
Yes, the manual of the Smeg SNLK61MX9 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Smeg and is the answer not in the manual?
Question and answer
Number of questions: 0