Smeg PV175B2 manual

Smeg PV175B2
6.7 · 1
PDF manual
 · 22 pages
English
manualSmeg PV175B2
Use
32

3.3 Using the hob

All the appliance's control and monitoring
devices are located together on the front
panel. The burner controlled by each knob
is shown next to the knob. The appliance is
equipped with an electronic ignition device.
Simply press the knob and turn it anti-
clockwise to the maximum flame symbol,
until the burner lights. If the burner does not
light in the first 15 seconds, turn the knob to
and wait 60 seconds before trying
again. After lighting, keep the knob pressed
in for a few seconds to allow the
thermocouple to heat up. The burner may
go out when the knob is released: in this
case, the thermocouple has not heated up
sufficiently. Wait a few moments and repeat
the operation. Keep the knob pressed in
longer.
Correct positioning of the grids
The grids over the burners must be
positioned in parallel to the control panel,
not perpendicular.
Correct positioning of the flame-
spreader crowns and burner caps
Before lighting the hob burners, make sure
that the flame-spreader crowns are
correctly positioned in their housings with
their respective burner caps. Make sure that
the holes in the burners are aligned with the
igniters and thermocouples. Also ensure that
the flame-spreader crowns are correctly
engaged in the burner holes.
In case of an accidental switching
off, a safety device will be tripped,
cutting off the gas supply, even if
the gas tap is open. Return the
knob to and wait at least 60
seconds before lighting it again.

Manual

View the manual for the Smeg PV175B2 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Smeg PV175B2 or do you need help? Ask your question here

Need help?

Do you have a question about the Smeg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Smeg PV175B2 specifications

Below you will find the product specifications and the manual specifications of the Smeg PV175B2.

General
BrandSmeg
ModelPV175B2 | PV175B2
Productstove
EAN8017709254766
LanguageEnglish
FiletypeUser manual (PDF), Product Brochure (PDF), Brochure (PDF), Warranty information (PDF), Datasheet (PDF)
Design
Appliance placementBuilt-in
Hob typeGas
Top surface typeGlass
Number of cooking zones5 zone(s)
Number of gas cooking zones5 zone(s)
Number of electric cooking zones0 zone(s)
Product colorWhite
Number of simultaneously used cooking zones5
Pan support materialCast iron
Hob width size72 cm
Finish typeGloss
Cooking zone 1 typeRegular
Cooking zone 1 shapeRound
Cooking zone 1 positionLeft rear
Cooking zone 1 power sourceGas
Cooking zone 1 power1700 W
Cooking zone 2 typeSimmer
Cooking zone 2 shapeRound
Cooking zone 2 positionLeft front
Cooking zone 2 power sourceGas
Cooking zone 2 power1100 W
Cooking zone 3 typeExtra large
Cooking zone 3 shapeRound
Cooking zone 3 positionCentral
Cooking zone 3 power sourceGas
Cooking zone 3 power3500 W
Cooking zone 4 typeLarge
Cooking zone 4 shapeRound
Cooking zone 4 positionRight rear
Cooking zone 4 power sourceGas
Cooking zone 4 power2600 W
Cooking zone 5 typeRegular
Cooking zone 5 shapeRound
Cooking zone 5 positionRight front
Cooking zone 5 power sourceGas
Cooking zone 5 power1700 W
Power
Connected load (electric)1 W
Connected load (gas)10300 W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Gas typeLiquefied Petroleum Gas (LPG)
Number of phases1
Performance
CertificationCE
Thermocouple protectionYes
Number of power levels-
Safety valveYes
Ergonomics
Easy to cleanYes
Built-in displayNo
Control typeRotary
Electronic ignitionYes
Control positionTop front
Child lock-
Weight & dimensions
Width720 mm
Depth510 mm
Height48 mm
Installation compartment width564 mm
Installation compartment depth (min)482 mm
Installation compartment depth (max)486 mm
Installation compartment depth486 mm
Cord length1.2 m
Weight16700 g
Cooker hood
Built-in hoodNo
Packaging data
Package width860 mm
Package depth610 mm
Package height155 mm
Package weight19600 g
Technical details
No
Logistics data
Country of originItaly
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg PV175B2 below.

What is the weight of the Smeg PV175B2?

The Smeg PV175B2 has a weight of 16700 g.

What certifications does the Smeg PV175B2 have?

The Smeg PV175B2 has the following certifications: CE.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

What is the height of the Smeg PV175B2?

The Smeg PV175B2 has a height of 48 mm.

What is the width of the Smeg PV175B2?

The Smeg PV175B2 has a width of 720 mm.

What is the depth of the Smeg PV175B2?

The Smeg PV175B2 has a depth of 510 mm.

Is the manual of the Smeg PV175B2 available in English?

Yes, the manual of the Smeg PV175B2 is available in English .

Is your question not listed? Ask your question here

No results