Smeg PV163S2 manual

Smeg PV163S2
6.8 · 1
PDF manual
 · 22 pages
English
manualSmeg PV163S2
Use
32

3.3 Using the hob

All the appliance's control and monitoring
devices are located together on the front
panel. The burner controlled by each knob
is shown next to the knob. The appliance is
equipped with an electronic ignition device.
Simply press the knob and turn it anti-
clockwise to the maximum flame symbol,
until the burner lights. If the burner does not
light in the first 15 seconds, turn the knob to
and wait 60 seconds before trying
again. After lighting, keep the knob pressed
in for a few seconds to allow the
thermocouple to heat up. The burner may
go out when the knob is released: in this
case, the thermocouple has not heated up
sufficiently. Wait a few moments and repeat
the operation. Keep the knob pressed in
longer.
Correct positioning of the grids
The grids over the burners must be
positioned in parallel to the control panel,
not perpendicular.
Correct positioning of the flame-
spreader crowns and burner caps
Before lighting the hob burners, make sure
that the flame-spreader crowns are
correctly positioned in their housings with
their respective burner caps. Make sure that
the holes in the burners are aligned with the
igniters and thermocouples. Also ensure that
the flame-spreader crowns are correctly
engaged in the burner holes.
In case of an accidental switching
off, a safety device will be tripped,
cutting off the gas supply, even if
the gas tap is open. Return the
knob to and wait at least 60
seconds before lighting it again.

Manual

View the manual for the Smeg PV163S2 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Smeg PV163S2 or do you need help? Ask your question here

Need help?

Do you have a question about the Smeg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Smeg PV163S2 specifications

Below you will find the product specifications and the manual specifications of the Smeg PV163S2.

General
BrandSmeg
ModelPV163S2 | PV163S2
Productstove
EAN8017709254728
LanguageEnglish
FiletypeUser manual (PDF), Product Brochure (PDF), Brochure (PDF), Warranty information (PDF), Datasheet (PDF)
Design
Appliance placementBuilt-in
Hob typeGas
Number of cooking zones3 zone(s)
Top surface typeGlass
Number of simultaneously used cooking zones3
Product colorBrushed steel
Number of gas cooking zones3 zone(s)
Number of electric cooking zones0 zone(s)
Pan support materialCast iron
Simmer cooking zone shapeRound
Regular cooking zone shapeRound
Large cooking zone shapeRound
Cooking zone 3 power1100 W
Cooking zone 2 shapeRound
Cooking zone 1 power3200 W
Cooking zone 2 positionRight rear
Cooking zone 3 power sourceGas
Cooking zone 3 positionRight front
Cooking zone 2 power sourceGas
Cooking zone 3 shapeRound
Cooking zone 2 power2600 W
Cooking zone 1 positionLeft
Cooking zone 1 shapeRound
Cooking zone 1 typeLarge
Cooking zone 3 typeSimmer
Cooking zone 1 power sourceGas
Cooking zone 2 typeRegular
Power
Connected load (electric)1 W
Connected load (gas)6900 W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Gas typeLiquefied Petroleum Gas (LPG)
Performance
Simmer cooking zone1100 W
Regular cooking zone2600 W
Large cooking zone3200 W
Thermocouple protectionYes
Ergonomics
Easy to cleanYes
Built-in displayNo
Electronic ignitionYes
Control typeRotary
Control positionTop front
Weight & dimensions
Width600 mm
Depth510 mm
Height48 mm
Installation compartment width560 mm
Installation compartment depth (min)482 mm
Installation compartment depth (max)486 mm
Installation compartment height40 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg PV163S2 below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

What is the height of the Smeg PV163S2?

The Smeg PV163S2 has a height of 48 mm.

What is the width of the Smeg PV163S2?

The Smeg PV163S2 has a width of 600 mm.

What is the depth of the Smeg PV163S2?

The Smeg PV163S2 has a depth of 510 mm.

Is the manual of the Smeg PV163S2 available in English?

Yes, the manual of the Smeg PV163S2 is available in English .

Is your question not listed? Ask your question here

No results