Smeg PV163S2 manual

Smeg PV163S2
6.8 · 1
PDF manual
 · 22 pages
English
manualSmeg PV163S2

Installation

36

5 Installation

5.1 Safety instructions

Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
The minimum distances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.

5.2 Section cut from the work surface

Create an opening with the dimensions
shown in the figure in the work surface of
the piece of furniture.
Heat production during appliance
operation
Risk of fire
Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
The minimum distance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
L (mm) X (mm) Y (mm)
600 - 720 560 ÷ 564 482 ÷ 486
A (mm) B (mm) C (mm) D (mm) E (mm)
min 150 min 460 min 750 20 ÷ 60 min 50

Manual

View the manual for the Smeg PV163S2 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Smeg PV163S2 or do you need help? Ask your question here

Need help?

Do you have a question about the Smeg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Smeg PV163S2 specifications

Below you will find the product specifications and the manual specifications of the Smeg PV163S2.

General
BrandSmeg
ModelPV163S2 | PV163S2
Productstove
EAN8017709254728
LanguageEnglish
FiletypeUser manual (PDF), Product Brochure (PDF), Brochure (PDF), Warranty information (PDF), Datasheet (PDF)
Design
Appliance placementBuilt-in
Hob typeGas
Number of cooking zones3 zone(s)
Top surface typeGlass
Number of simultaneously used cooking zones3
Product colorBrushed steel
Number of gas cooking zones3 zone(s)
Number of electric cooking zones0 zone(s)
Pan support materialCast iron
Simmer cooking zone shapeRound
Regular cooking zone shapeRound
Large cooking zone shapeRound
Cooking zone 3 power1100 W
Cooking zone 2 shapeRound
Cooking zone 1 power3200 W
Cooking zone 2 positionRight rear
Cooking zone 3 power sourceGas
Cooking zone 3 positionRight front
Cooking zone 2 power sourceGas
Cooking zone 3 shapeRound
Cooking zone 2 power2600 W
Cooking zone 1 positionLeft
Cooking zone 1 shapeRound
Cooking zone 1 typeLarge
Cooking zone 3 typeSimmer
Cooking zone 1 power sourceGas
Cooking zone 2 typeRegular
Power
Connected load (electric)1 W
Connected load (gas)6900 W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Gas typeLiquefied Petroleum Gas (LPG)
Performance
Simmer cooking zone1100 W
Regular cooking zone2600 W
Large cooking zone3200 W
Thermocouple protectionYes
Ergonomics
Easy to cleanYes
Built-in displayNo
Electronic ignitionYes
Control typeRotary
Control positionTop front
Weight & dimensions
Width600 mm
Depth510 mm
Height48 mm
Installation compartment width560 mm
Installation compartment depth (min)482 mm
Installation compartment depth (max)486 mm
Installation compartment height40 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg PV163S2 below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

What is the height of the Smeg PV163S2?

The Smeg PV163S2 has a height of 48 mm.

What is the width of the Smeg PV163S2?

The Smeg PV163S2 has a width of 600 mm.

What is the depth of the Smeg PV163S2?

The Smeg PV163S2 has a depth of 510 mm.

Is the manual of the Smeg PV163S2 available in English?

Yes, the manual of the Smeg PV163S2 is available in English .

Is your question not listed? Ask your question here

No results