Smeg LSA6246X manual

Smeg LSA6246X
8.3 · 2
PDF manual
 · 35 pages
English
manualSmeg LSA6246X

Installation instructions

6

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or
has not been used for a long time, before connecting to the water supply
check that the water is clear and free of impurities, to prevent damage to
the appliance.
The dishwasher must always be connected to the water system
with new hoses; old or used hoses must never be reused.
CONNECTING TO THE WATER SUPPLY
Connect the intake hose to a cold water supply with ¾”
gas thread, inserting the filter A supplied with the
dishwasher. Take care to screw the hose firmly into
place with your hands and then complete by
tightening about ¼ of a turn with pliers.
In dishwashers equipped with the ACQUASTOP
device, the filters is already fitted inside the threaded
ring.
The dishwasher can also be connected to a hot water supply not
exceeding 60°C. Supplying the appliance with hot water cuts down the
washing time by approximately 20 minutes, but slightly reduces its
effectiveness. Make the connection to the domestic hot water supply using
the same procedure described for connecting to the cold water supply.
DRAIN CONNECTION
Insert the dishwasher’s drain hose
into a drain pipe having a diameter
of at least 4 cm, or alternatively,
place it inside the kitchen sink
using the plastic support provided,
taking care not to crush or
excessively bend the hose. It is
important to prevent the hose from
coming loose and falling. For this
purpose, the plastic support is
equipped with a hole for tying it to
the wall or water tap.
The free end should be positioned at a height of between 30 and 100
cm, and should never be submerged in water. If a horizontal drain
extension hose is used (for a maximum of 3 m) the drain hose can be
placed at a maximum height of 85 cm from the ground.

Manual

View the manual for the Smeg LSA6246X here, for free. This manual comes under the category Dishwashers and has been rated by 2 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Smeg LSA6246X or do you need help? Ask your question here

Need help?

Do you have a question about the Smeg LSA6246X and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Smeg LSA6246X owners to provide you with a good answer.

Number of questions: 0

Smeg LSA6246X specifications

Below you will find the product specifications and the manual specifications of the Smeg LSA6246X.

General
Brand Smeg
Model LSA6246X | LSA6246X
Product Dishwasher
EAN 8017709123369
Language English
Filetype Usermanual (PDF)
Design
Appliance placement Freestanding
Concealed heating element
Door colour Stainless steel
Other features
Washing class A
Drying class A
Performance
Noise level 46 dB
Number of washing programs 5
Number of place settings 12 place settings
AquaStop function
Delayed start timer
Power
Water consumption per cycle 14 L
Connected load 1900 W
Energy consumption per cycle 1.05 kWh
Weight & dimensions
Width 598 mm
Depth 600 mm
Height 850 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg LSA6246X below.

Is your question not listed? Ask your question here

No results