Smeg FAB30RLI3 manual

Smeg FAB30RLI3
7.9 · 1
PDF manual
 · 20 pages
English
manualSmeg FAB30RLI3

Installation

40

5 Installation

5.1 Electrical connection

General information
Check the mains characteristics against
the data indicated on the plate. The
identification plate bearing the technical
data, serial number and brand name is
visibly positioned inside the appliance.
Do not remove this plate for any reason.
Make sure that the plug and socket are
of the same type.
Avoid using adapters, gang sockets or
extensions as these could cause
overheating and a risk of burns.
The plug must always be accessible
when the appliance is installed.
Leave the appliance standing vertically
for at least two hours before turning it on
for the first time.
If it is necessary to replace the power
cable, this must be performed by an
authorised technician from Technical
Support Service.

5.2 Positioning

Choice of location
Always install the appliance in a dry place
with satisfactory ventilation. Depending on
its climate class (stated on the nameplate
inside the refrigerator compartment), the
appliance can be used in different
temperature conditions.
Install the appliance at least 3 cm away
from electrical or gas cookers and at
least 30 cm away from combustion
heaters or radiators.
Power voltage
Danger of electrocution
The appliance must be connected to
ground in compliance with electrical
system safety standards.
Do not pull the cable to remove the plug.
Heavy appliance
Crushing hazard
Position the appliance with the aid of a
second person.
Pressure on the open door
Risk of damage to the appliance
Never use the open door to lever the
appliance into place when fitting.
Avoid exerting too much pressure on the
door when open.
The appliance must not be exposed to
direct sunlight.
The appliance must not be placed near
sources of heat. If this is not possible, a
suitable insulation panel must be used.
Do not use the appliance outdoors.

Manual

View the manual for the Smeg FAB30RLI3 here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Smeg FAB30RLI3 or do you need help? Ask your question here

Need help?

Do you have a question about the Smeg and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Smeg FAB30RLI3 specifications

Below you will find the product specifications and the manual specifications of the Smeg FAB30RLI3.

General
BrandSmeg
ModelFAB30RLI3 | FAB30RLI3
Productrefrigerator
EAN8017709273248
LanguageEnglish
FiletypeUser manual (PDF), Warranty information (PDF), Energy label (PDF)
Design
Appliance placementFreestanding
Product colorLime
Door hingeRight
Reversible doorsNo
Door opening angle90 °
Control typeRotary
Built-in displayNo
Shelves materialGlass
Number of compressors1
Inverter technologyYes
Custom panel-ready-
Refrigerating mediumR600a
Refrigerating medium weight70 g
Freezer
Freezing capacity4 kg/24h
Storage time during power failure30 h
Star rating4*
No Frost (freezer)No
Freezer number of shelves/baskets2
Fast freeze function-
Freezer positionTop-placed
Freezer net capacity72 L
Fresh zone
Fresh zone compartmentYes
Fresh zone compartment net capacity193 L
Performance
Total net capacity294 L
Climate classSN-T
Noise level37 dB
Minimum operating temperature10 °C
Maximum operating temperature43 °C
Total gross capacity298 L
Icemaker-
Holiday function-
Ergonomics
Door open alarmYes
Temperature alarm-
Adjustable feetYes
Feet adjustment15 mm
Cord length1.35 m
Fridge
Fridge net capacity222 L
Fridge interior lightYes
Lamp typeLED
No Frost (fridge)No
Multi-Airflow system (fridge)Yes
Fridge number of shelves/baskets3
Number of removable shelves2
Number of vegetable drawers1
Fridge door balconies3
Bottle rackYes
Super Cool function-
Automatic defrost (fridge)No
Anti-bacterial coatingYes
Power
A+++
Power sourceElectric
Connected load100 W
Annual energy consumption156 kWh
AC input voltage220 - 240 V
AC input frequency50 Hz
Current0.8 A
Weight & dimensions
Width601 mm
Depth788 mm
Height1720 mm
Depth without handle728 mm
Width with door open926 mm
Depth with door open1197 mm
Weight78600 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Smeg FAB30RLI3 below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

What is the weight of the Smeg FAB30RLI3?

The Smeg FAB30RLI3 has a weight of 78600 g.

What is the height of the Smeg FAB30RLI3?

The Smeg FAB30RLI3 has a height of 1720 mm.

What is the width of the Smeg FAB30RLI3?

The Smeg FAB30RLI3 has a width of 601 mm.

What is the depth of the Smeg FAB30RLI3?

The Smeg FAB30RLI3 has a depth of 788 mm.

Is the manual of the Smeg FAB30RLI3 available in English?

Yes, the manual of the Smeg FAB30RLI3 is available in English .

Is your question not listed? Ask your question here

No results