Singer M1150 manual

Singer M1150
7.6 · 1
PDF manual
 · 24 pages
English
manualSinger M1150

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this household sewing machine.
When using an electrical appliance, basic safety precautions should always be followed, including the following:
Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is
given to a third party.
This appliance is intended for use by adults. The appliance can be used with adult supervision by (i) children
aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given instruction concerning use of the appliance in a safe way
and understand the hazards involved. Cleaning and user maintenance shall not be made by children without
supervision. It is not allowed for anyone to play with the machine. Children up to 8 years are not allowed to use
the machine.

WARNING –

TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSON:

A sewing machine should never be left unattended when plugged in. The electrical socket, to which the
machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric outlet
immediately after using and before cleaning, removing covers, lubricating or when making any other user
servicing adjustments mentioned in the instruction manual.
Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or
service center for examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot control free from the accumulation of lint, dust, and loose cloth.
Keep ngers away from all moving parts. Special care is required around the sewing machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deect the needle causing it to break.
Wear safety glasses.
Switch the sewing machine o (“0”) when making any adjustment in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.
To disconnect, turn all controls to the o (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
The foot control is used to operate the machine. Never place other objects on the foot control.
Do not use the machine if it is wet.
If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a
similarly qualied person, in order to avoid a hazard.

View the manual for the Singer M1150 here, for free. This manual comes under the category sewing machines and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Singer M1150 or do you need help? Ask your question here

Need help?

Do you have a question about the Singer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 7
K
Kimberly NicholsonJune 8, 2024

Thread looping underneath with staight stitch

Thread looping underneath with staight stitch
zoom-in
View photo
V
Virginia ClausnitzerMay 16, 2024

I cannot reinsert a needle back into the sewing machine. I bought a M1150. The user manual was not any help. Is there any trick to putting the needle back?

J
JoAnn StockwellMay 18, 2024

How do I get the manual for the singer M1150

L
LucieJanuary 22, 2024

How to remove needle on M1150

B
Barbara A WolbeckApril 10, 2024

What size bobbin?

L
LuzMay 23, 2024

Cómo funciona

J
Janet GershonMay 17, 2024

My sewing machine did not have a manual

The Singer M1150 is a sewing machine that offers a range of features and functionalities. It is designed to provide convenience and efficiency in various sewing projects. With its sturdy construction, the Singer M1150 ensures long-lasting performance. It is built with durable materials that can withstand regular use. This sewing machine has a user-friendly interface, making it easy to operate even for beginners. It offers a variety of stitch options, allowing users to select the most suitable one for their specific needs. The Singer M1150 also has adjustable stitch length and width, providing versatility in sewing projects. This feature allows users to customize their stitches according to the fabric and design requirements. Additionally, this sewing machine comes with a built-in needle threader, eliminating the need for manual threading. It saves time and effort, making the sewing process more efficient. Moreover, the Singer M1150 has a free arm, facilitating the sewing of cylindrical items such as sleeves or cuffs. This feature enables users to work on a diverse range of projects with ease. In conclusion, the Singer M1150 is a reliable sewing machine that offers durability, convenience, and versatility. Its user-friendly interface and various features make it suitable for sewing enthusiasts of all skill levels.

General
BrandSinger
ModelM1150
Productsewing machine
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Singer M1150 below.

What size needle should I use?

Which size of needle you can best use depends on the thickness of the fabric you use. With a thick fabric you should use a thick needle. The packaging of your needle states for which substances your needle is suitable.

How long does a sewing needle last?

Generally, a sewing needle lasts about 7 to 9 hours.

Why does the needle break while sewing?

There can be several causes for needle breakage: - Not using the right needle for the right fabric - The needle is set too low - The fabric is not properly guided - The bobbin case is not inserted correctly

How can I adjust the stitch width and length on the Singer M1150 sewing machine?

To adjust the stitch width and length on the Singer M1150 sewing machine, follow these steps: 1. Select the desired stitch pattern on the stitch selector dial. The stitch patterns are usually indicated by numbers or symbols on the dial. 2. To adjust the stitch width, locate the stitch width control. It is typically a dial or lever located near the needle area. Turn the dial or move the lever to increase or decrease the stitch width according to your preference. 3. To adjust the stitch length, locate the stitch length control. It is usually a dial or lever located near the stitch width control. Turn the dial or move the lever to increase or decrease the stitch length as needed. 4. Test the adjusted stitch width and length on a scrap piece of fabric before sewing on your actual project. This will allow you to make any further adjustments if necessary. Remember to refer to the user manual for specific instructions and illustrations related to your Singer M1150 sewing machine.

Why is the sewing machine not turning on when I press the on/off switch?

If the Singer M1150 sewing machine is not turning on when you press the on/off switch, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the power cord is securely plugged into both the sewing machine and the wall socket. If the machine is connected to a power strip or extension cord, make sure it is functioning properly. 2. Verify the power switch position: Ensure that the on/off switch is in the "on" position. Sometimes, the switch may be accidentally turned off or in an intermediate position. 3. Check for a blown fuse or tripped circuit breaker: If the sewing machine is not receiving power, check the fuse or circuit breaker in your home's electrical panel. Replace any blown fuses or reset the circuit breaker if necessary. 4. Test with a different power outlet: Try plugging the sewing machine into a different power outlet to rule out any issues with the original outlet. 5. Contact customer support: If the sewing machine still does not turn on after following these steps, it may indicate a more significant electrical issue. Contact Singer customer support or a qualified technician for further assistance. Remember, these troubleshooting steps are general guidelines and may vary depending on the specific model of the Singer M1150 sewing machine.

How do I properly thread the Singer M1150 sewing machine?

To properly thread the Singer M1150 sewing machine, follow these steps: 1. Start by ensuring that the presser foot is raised and the needle is in its highest position. This is important for correct threading and stitch quality. 2. Pull up the spool pin to its full extent and place a thread spool on the spool pin. 3. Thread the machine by bringing the thread into the thread guide from the back to the front, making sure it slips into the spring. 4. Pull the thread over the thread guide and down into the threading slot. 5. Continue bringing the thread down through the right threading slot, around the tension dial (ensuring it slips into the tension discs), and back upwards through the left threading slot. 6. Bring the thread from the right into the take-up lever and down into the left-hand threading slot, and finally into the needle thread guide. 7. Thread the needle from front to back. To bring up the bobbin thread, hold the upper thread with your left hand and turn the handwheel towards you to lower and raise the needle. Gently pull on the upper thread to bring the bobbin thread up through the needle plate hole. Lay both threads to the back under the presser foot. Remember to refer to the user manual for specific instructions and illustrations related to your Singer M1150 sewing machine.

Why is the thread tension not balanced and causing uneven stitches?

If the thread tension on the Singer M1150 sewing machine is not balanced and causing uneven stitches, you can try the following steps to troubleshoot the issue: 1. Check the threading: Ensure that the machine is threaded correctly, following the threading path as specified in the user manual. Make sure the thread is properly seated in the tension discs and the thread guides. 2. Adjust the tension dial: Locate the tension dial on the machine, usually located near the front or side. Turn the dial slightly to the left or right to adjust the tension. A higher number usually increases tension, while a lower number decreases tension. Experiment with small adjustments until the stitches appear balanced. 3. Test with different fabric and thread: Uneven tension can sometimes be caused by the combination of fabric and thread. Try using different types of fabric and thread to see if the tension improves. Some fabrics may require different tension settings for optimal results. 4. Clean the machine: Dust, lint, or debris can affect the tension mechanism. Clean the machine, especially the tension discs, using a soft brush or lint brush. This will ensure smooth operation and consistent tension. 5. Consult a professional: If the tension issue persists, it may require professional servicing. Contact Singer customer support or a qualified technician for further assistance. Remember, these troubleshooting steps are general guidelines and may vary depending on the specific model of the Singer M1150 sewing machine.

What should I do if the sewing machine is not sewing in reverse when I use the reverse sewing lever?

If the Singer M1150 sewing machine is not sewing in reverse when you use the reverse sewing lever, you can try the following steps to troubleshoot the issue: 1. Check the threading: Ensure that the machine is threaded correctly, following the threading path as specified in the user manual. Make sure the thread is properly seated in the tension discs and the thread guides. 2. Verify the stitch selector dial: Ensure that the stitch selector dial is set to a stitch pattern that includes a reverse stitch. Some stitch patterns may not have a reverse option. 3. Clean the machine: Dust, lint, or debris can affect the functionality of the reverse sewing mechanism. Clean the machine, especially the area around the reverse sewing lever, using a soft brush or lint brush. 4. Lubricate the machine: Insufficient lubrication can cause the reverse sewing lever to become stiff or unresponsive. Apply a small amount of sewing machine oil to the designated lubrication points as specified in the user manual. 5. Consult a professional: If the issue persists, it may require professional servicing. Contact Singer customer support or a qualified technician for further assistance. Remember, these troubleshooting steps are general guidelines and may vary depending on the specific model of the Singer M1150 sewing machine.

Is the manual of the Singer M1150 available in English?

Yes, the manual of the Singer M1150 is available in English .

Is your question not listed? Ask your question here

No results