Singer Heavy Duty 6600C manual

Singer Heavy Duty 6600C
9.1 · 9
PDF manual
 · 40 pages
English
manualSinger Heavy Duty 6600C

Navigation Arrows

Press the up and down arrows to select stitch and/or to adjust the stitch settings.
The left set of arrows change the left number on the display and the right arrows changes the right number.
Note: Make sure that the correct menu is selected before using the selection arrows. A light next to the menu is lit
when a menu is active.

Utility and Decorative Stitches

Select this menu for sewing. The stitches included in your machine are pictured on the machine. Next to each
stitch is a number, this is the number used to select the stitch.

Stitch Width / Needle Position

Select this menu to adjust the stitch width of the selected stitch.
When you select a stitch, your machine automatically sets the best stitch width. The default setting is indicated on
the display. The stitch width can be adjusted between 0–7mm. Some stitches have a limited stitch width. Increase
the stitch width by pressing “up”, decrease it by pressing “down”.
When a straight stitch or a reinforced straight stitch is selected, the Stitch Width button is used to adjust the
needle position. When pressing “up”, the needle position is moved to the right. When pressing “down”, the
needle moves to the left. Center needle position is set when the stitch width is 3.5.

Stitch Length

Select this menu to adjust the stitch length of the selected stitch.
When you select a stitch, your machine automatically sets the best stitch length. The default setting is indicated
on the display. The stitch length can be adjusted between 0–4.5mm. Some stitches have a limited stitch length.
Increase the stitch length by pressing “up”, decrease it by pressing “down”.

Select Stitch

B

A

C

D

When you turn on your machine, the Utility and Decorative
Stitch Menu is active. This is indicated by the light, next to the
menu icon (A). Straight stitch (stitch no.00) (B) is selected by
default.
The stitches are printed on the machine. The Stitch Number is
printed above the picture of respective stitch (C).
Press the up and down arrows to select stitch. The left set of
arrows change the left number on the display and the right
arrows changes the right number (D).
Each stitch has a pre-set stitch length and width. At the bottom
right of the machine, you can slide forward a chart showing
what presser foot that is recommended for each stitch.
Preparations 17
English

View the manual for the Singer Heavy Duty 6600C here, for free. This manual comes under the category sewing machines and has been rated by 9 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Singer Heavy Duty 6600C or do you need help? Ask your question here

Need help?

Do you have a question about the Singer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 70
E
Evelyn Sharland February 5, 2023

Hello . My Singer Heavy duty (model HD6600C has been working well until now. I turned power on and screen reads 5P snd no response occurs when buttons pressed. I unplugged it for several minutes and there was no chAnge when I turned it back on. An you help me please ?

Hello .  My Singer Heavy duty (model HD6600C has been working well until now.  I turned power on and screen reads 5P snd no r...
zoom-in
View photo
3 comments
E
Emma of manua.lsDecember 19, 2023

The Singer Heavy Duty 6600C sewing machine manual does not directly address the "5P" error code displayed on the screen. However, you can try the following steps to resolve the issue: 1. Check if the presser foot is properly attached. Make sure it is correctly placed and snapped into position. 2. Ensure that the machine is not in reverse mode. Press and release the reverse button to switch back to forward sewing. 3. Verify that the needle is in the highest position. You can use the needle up/down button to move it to the highest position. If the issue persists after attempting these steps, please seek further assistance.

This answer is automatically generated
J
JoshMay 17, 2023

See the bobbin spinner on top of machine … push it forward your machine is in spool mode.. it got me when I first got my machine too

See the bobbin spinner on top of machine … push it forward your machine is in spool mode.. it  got me when I first got my mac...
zoom-in
View photo
L
Linda.WoodardNovember 26, 2023

How do I wind the bobbin on my new machine

C
Chaliana Ramos July 28, 2023

Greetings, because this is what my machine is displaying. IT IS NOT WORKING, I will greatly appreciate any help you can provide to me, which is what is happening and how can I solve it. Thank you in advance. God bless me.

Greetings, because this is what my machine is displaying. IT IS NOT WORKING, I will greatly appreciate any help you can provi...
zoom-in
View photo
This message has been automatically translated
E
Emerald Bussell August 30, 2023

My machine keeps stopping and throwing an EL code. Can you please tell me whatvthis means? It is pretty much Brand new. I have only sewn on it twice!! And now it is giving me these issues

My machine keeps stopping and throwing an EL code. Can you please tell me whatvthis means? It is pretty much Brand new. I hav...
zoom-in
View photo
1 comment
E
Emma of manua.lsJanuary 18, 2024

The EL code on the Singer Heavy Duty 6600C sewing machine indicates an error related to the electrical system. Here are the steps to troubleshoot this issue: 1. Ensure that the machine is properly plugged into a functioning electrical outlet. 2. Check the power cord for any damage or loose connections. 3. Make sure that the machine is turned off before performing any adjustments or maintenance tasks. 4. Check the needle area for any obstructions or foreign objects. 5. Verify that the foot control is properly connected and functioning correctly. 6. If the issue persists, it is recommended to contact an authorized dealer or service center for further assistance.

This answer is automatically generated
P
PatiMay 4, 2022

How do i adjust stitch length?

1 comment
E
Emma of manua.lsOctober 24, 2023

To adjust the stitch length on the Singer Heavy Duty 6600C sewing machine, please follow the steps below: 1. Turn the handwheel towards you to raise the needle to its highest position. 2. Lift the presser foot and remove the fabric, pulling the threads towards the back. 3. Pull the threads up and into the thread knife so that they are cut to the proper length, ensuring the needle won't become unthreaded when starting the next seam.

This answer is automatically generated
D
Daphine AkersJune 14, 2022

When I press the pedal down it starts sewing but when I remove my foot off of it the machine doesn't stop. is it suppose to do this?

L
LorettaJanuary 11, 2023

I changed the needle, and I don't no what I did but the pressure foot won't pull the material through , so I can sew

D
Doris OrtizMarch 1, 2023

I'm having trouble sewing through thick fabric like 10 layers, the top thread keeps coming out of the needle. I have a titanium needle and it is a 100/16. what are some other tips you have so I don't break my machine?

R
Robin MazzaMarch 16, 2023

Just purchased Singer 6600C Heavy duty machine. Right out of box when trying to spoil bobbin the piece to hold thread on is missing as well it displays error code 5P and can’t seem to change it. HELP

P
Pam KiltyApril 19, 2023

I have a brand new Singer 6600. I keep getting an error EL with a thread jam up. What can I do for a fix? I have turned it off/on , waited overnight etc.

The Singer Heavy Duty 6600C sewing machine is a sturdy and reliable device that is designed to handle a variety of fabrics with ease. Its heavy-duty metal frame ensures the stability of the machine, even when handling tough materials such as denim or leather. The machine comes equipped with an impressive 1,100 stitches per minute speed, making it a great choice for those who sew frequently and need to work at a fast pace. The machine features an automatic needle threader that makes it easy to quickly replace needles and continue with your project. The LCD screen displays information such as the stitch length and width, making it simple to adjust as needed. The machine also has 13 needle positions, which allow for precise stitching. The Singer Heavy Duty 6600C sewing machine comes with a wide range of accessories, including a variety of presser feet, such as a walking foot and a quilting foot, and a large extension table to increase your workspace. Additionally, the machine has a drop-in bobbin system with a clear cover, allowing you to keep an eye on your thread supply while you work. Overall, the Singer Heavy Duty 6600C sewing machine is a great choice for those who need a sturdy and reliable device that can handle a wide range of fabrics. With its impressive speed and range of features, it is sure to meet the needs of even the most demanding sewing projects.

General
BrandSinger
ModelHeavy Duty 6600C
Productsewing machine
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Singer Heavy Duty 6600C below.

What size needle should I use?

Which size of needle you can best use depends on the thickness of the fabric you use. With a thick fabric you should use a thick needle. The packaging of your needle states for which substances your needle is suitable.

How long does a sewing needle last?

Generally, a sewing needle lasts about 7 to 9 hours.

Why does the needle break while sewing?

There can be several causes for needle breakage: - Not using the right needle for the right fabric - The needle is set too low - The fabric is not properly guided - The bobbin case is not inserted correctly

Why is my Singer Heavy Duty 6600C sewing machine not turning on?

First, make sure the machine is properly plugged into a functioning power outlet. If it is connected correctly and still not turning on, check if the power switch is in the "ON" position. Additionally, check the power cord and motor for any visible faults or loose connections.

Why is the needle not moving up and down while stitching?

Start by ensuring the machine is correctly threaded. Next, check the needle to see if it is bent or dull. Replace the needle if necessary. If the issue persists, examine the presser foot to ensure it is securely attached and not causing any obstructions to the needle movement.

How can I fix the tension issues on my sewing machine?

To adjust the tension, begin by raising the presser foot. Then, turn the tension dial to a lower number for less tension or a higher number for more tension. Make small adjustments and test your stitches on a scrap fabric until you achieve the desired tension.

Why is my Singer Heavy Duty 6600C sewing machine thread constantly breaking?

Firstly, check if the thread is properly threaded through the machine, including the tension disks. Ensure the thread is not tangled or caught on any rough areas. Additionally, verify the needle size is suitable for the fabric being sewn. Using a needle that is too small can cause thread breakage.

How can I troubleshoot skipped stitches on my sewing machine?

Begin by checking the needle for any signs of wear or damage and replace it if necessary. Ensure the needle is inserted correctly with the flat side facing the back. Clean the bobbin area and make sure the bobbin is correctly inserted. Finally, check if the fabric is being guided smoothly under the presser foot, as uneven feeding can cause skipped stitches.

Is the manual of the Singer Heavy Duty 6600C available in English?

Yes, the manual of the Singer Heavy Duty 6600C is available in English .

Is your question not listed? Ask your question here

No results