View the manual for the Silva EX Distance here, for free. This manual comes under the category not categorized and has been rated by 2 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Silva EX Distance or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Silva EX Distance.
| Brand | Silva |
| Model | EX Distance |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Silva EX Distance below.
To ensure that your Silva EX Distance pedometer registers the correct number of steps, follow these steps: 1. Place the pedometer upright on your belt at the hip to prevent incorrect step registration. 2. Switch between metric and imperial units by pressing and holding both buttons for 5 seconds, but note that this will reset accumulated data. 3. Set the correct stride length by walking 10 steps, measuring the distance, and dividing it by 10 to get your stride length. 4. Adjust the stride length using the SET button to ensure accurate distance calculation. 5. Set your body weight for calorie consumption calculations by pressing MODE until "CAL" is displayed and adjusting the weight using the SET button. 6. Reset the pedometer by pushing both buttons for 2 seconds to clear steps, distance, calories, and timer. 7. Use the filter function to ensure accurate step counting by requiring six consecutive steps for counting to continue.
To change the distance and weight units on the Silva EX Distance pedometer, follow these steps: 1. Press and hold both buttons for 5 seconds to switch between metric (kilograms, kilometers, and centimeters) and imperial (pounds, miles, and feet). 2. Note that this action will reset the steps, distance, and calories accumulated. 3. To set the stride length for accurate distance measurement, walk 10 steps and measure the distance. Divide the distance by 10 to calculate your stride length. 4. Press MODE until "KM" or "MIL" is displayed, then press and hold SET to adjust the stride length. 5. To set the body weight, press MODE until "CAL" is displayed, then press and hold SET to adjust the weight to the correct value. These steps will help you customize the distance and weight units on your Silva EX Distance pedometer.
Yes, the manual of the Silva EX Distance is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Silva and is the answer not in the manual?
Question and answer
Number of questions: 0