Siig CE-MT0012-S1 manual

Siig CE-MT0012-S1
7.4 · 1
PDF manual
 · 4 pages
manualSiig CE-MT0012-S1


(x4) bolt
(x4) concrete
(x4) small
(x4) large
(x4) M4X12
(x4) M5X12
(x4) M6X12 screw

Fixed LCD TV/Monitor Mount - 10" to 24"

Attach the wall plate to the wall again and insert the bolts (A) and large washers
(D) into the holes (figure 1-b) and tighten.
Wood Stud Installation

Step 1: Wall Plate Installation

Installation Instructions

Use a high-quality electronic stud finder (commercially available) to locate dead
center of two studs and mark their locations with a pencil (figure 1-a).
Hold the wall plate to the wall and mark four locations to be used for mounting the
wall plate.
Take down the plate and drill four holes at the position you've marked.


View the manual for the Siig CE-MT0012-S1 here, for free. This manual comes under the category Wall supports and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Siig CE-MT0012-S1 or do you need help? Ask your question here

Need help?

Do you have a question about the Siig CE-MT0012-S1 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Siig CE-MT0012-S1 owners to provide you with a good answer.

Number of questions: 0

Siig CE-MT0012-S1 specifications

Below you will find the product specifications and the manual specifications of the Siig CE-MT0012-S1.

Brand Siig
Model CE-MT0012-S1
Product Wall support
Language English
Filetype Usermanual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siig CE-MT0012-S1 below.

Is your question not listed? Ask your question here

No results