Sigma PC 3FT manual

Sigma PC 3FT
9.8 · 1
PDF manual
 · 38 pages
English
manualSigma PC 3FT

PULSE COMPUTER

SIGMA SPORT USA:
North America
1926 Miller Drive
Olney, IL 62450, USA
Tel. ++1-618-393-7407
Fax ++1-618-393-6713
SIGMA SPORT EUROPA:
Dr.-Julius-Leber-Straße 15
D-67433 Neustadt a.d.W.
Tel. ++49-(0)6321-9120-118
Fax ++49-(0)6321-9120-34
SIGMA SPORT ASIA:
Asia, Australia, South America
7F-1, No. 193, Ta-Tun 6th Street,
Taichung City, Taiwan
Tel. ++886-4-2475 3577
Fax ++886-4-2475 3563
WWW.SIGMASPORT.COM
D
F
I
E
NL
WWW.SIGMASPORT.COM

PC 3FT

GB
US
2
8
3
1
0
6
/
2

View the manual for the Sigma PC 3FT here, for free. This manual comes under the category sport watches and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Sigma PC 3FT or do you need help? Ask your question here

Need help?

Do you have a question about the Sigma and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandSigma
ModelPC 3FT
Productsport watch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sigma PC 3FT below.

Do I need to switch off my sport watch at night?

It is sensible for you to switch off your sport watch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

How high is an adult's heart rate at rest?

An adult's resting heart rate is between 60 and 100 beats per minute.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch?

To check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch, follow these steps: 1. Open the packaging of the Sigma PC 3FT sport watch. 2. Take out all the items and lay them out on a flat surface. 3. Compare the items with the list of packaging contents mentioned in the manual. 4. Ensure that the following items are present: - Sigma PC 3FT sport watch - Heart rate monitor strap - User manual - Warranty card (if applicable) - Any additional accessories or components mentioned in the packaging contents list. 5. Verify that each item matches the description and specifications mentioned in the manual. 6. If any item is missing or does not match the description, contact the customer support of Sigma SPORT for assistance. 7. Once you have confirmed that all the mentioned contents are included, you can proceed with setting up and using your Sigma PC 3FT sport watch. By following these steps, you can ensure that you have received all the necessary items mentioned in the packaging of the Sigma PC 3FT sport watch.

Why is the display layout of my Sigma PC 3FT sport watch different from what is shown in the manual?

The display layout of your Sigma PC 3FT sport watch may appear different from what is shown in the manual due to various reasons. Here are some possible explanations: 1. Different language settings: The manual may show the display layout in a specific language, while your watch may be set to a different language. Check the language settings on your watch and adjust them accordingly. 2. Firmware updates: The manufacturer may have released firmware updates for the watch, which could have introduced changes to the display layout. Make sure your watch is running the latest firmware version by checking for updates on the manufacturer's website or through their official app. 3. Customization options: The Sigma PC 3FT sport watch may offer customization options for the display layout. It is possible that the layout shown in the manual is a default setting, and you have personalized the display to your preferences. Refer to the watch's settings menu to explore customization options and adjust the display layout as desired. If none of these explanations resolve the issue, consult the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I set the time on my Sigma PC 3FT sport watch?

To set the time on your Sigma PC 3FT sport watch, follow these steps: 1. Make sure the watch is in sleep mode, displaying only the time. 2. Press and hold the function button for 4 seconds until you see the word "hold" and the time format (either 24-hour or 12-hour) flashing on the display. 3. Use the function button to choose between the 24-hour and 12-hour time format. 4. Wait for the display to automatically change to the next setting. 5. Set the current time in hours by repeatedly pressing the function button. 6. Wait for the display to change to the next setting. 7. Set the first digit of the minute setting by repeatedly pressing the function button. 8. Wait for the display to change to the next setting. 9. Set the second digit of the minute setting by repeatedly pressing the function button. 10. Wait for the display to indicate that the time is now set. 11. The watch is now set to the correct time. By following these steps, you can easily set the time on your Sigma PC 3FT sport watch.

Why is the heart rate frequency not being displayed during my training session with the Sigma PC 3FT sport watch?

The heart rate frequency may not be displayed during your training session with the Sigma PC 3FT sport watch due to the following reasons: 1. Incorrect placement: Ensure that you are wearing the heart rate monitor strap correctly and that it is securely fastened around your chest, just below the chest muscles. The watch needs to be in contact with your skin to accurately measure your heart rate. 2. Weak battery: If the battery of your Sigma PC 3FT sport watch is low, it may affect the display and the heart rate measurement. Replace the battery with a new CR 2032 battery to ensure optimal performance. 3. Interference or signal loss: Check for any interference from other electronic devices or strong electromagnetic fields that may disrupt the heart rate signal. Move away from such sources to improve the signal reception. 4. Sweating or moisture: Excessive sweat or moisture on the skin or the heart rate monitor strap can interfere with the electrical contact needed for accurate heart rate measurement. Wipe off any sweat or moisture and ensure a good contact between the strap and your skin. If the issue persists, refer to the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I end a training session on my Sigma PC 3FT sport watch?

To end a training session on your Sigma PC 3FT sport watch, follow these steps: 1. While in training mode, press and hold the function button for a few seconds until the watch displays the pause symbol (two vertical lines). 2. Press the function button again to stop the training session. 3. The watch will display a summary of your training session, showing the duration, distance, average heart rate, and other relevant information. 4. To save the training session, press and hold the function button for a few seconds until the watch displays a confirmation message. 5. Press the function button again to confirm and save the training session. 6. The watch will return to the main screen, indicating that the training session has been successfully ended and saved. By following these steps, you can easily end a training session on your Sigma PC 3FT sport watch and save the data for future reference or analysis.

How do I check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch?

To check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch, follow these steps: 1. Open the packaging of the Sigma PC 3FT sport watch. 2. Take out all the items and lay them out on a flat surface. 3. Compare the items with the list of packaging contents mentioned in the manual. 4. Ensure that the following items are present: - Sigma PC 3FT sport watch - Heart rate monitor strap - User manual - Warranty card (if applicable) - Any additional accessories or components mentioned in the packaging contents list. 5. Verify that each item matches the description and specifications mentioned in the manual. 6. If any item is missing or does not match the description, contact the customer support of Sigma SPORT for assistance. 7. Once you have confirmed that all the mentioned contents are included, you can proceed with setting up and using your Sigma PC 3FT sport watch. By following these steps, you can ensure that you have received all the necessary items mentioned in the packaging of the Sigma PC 3FT sport watch.

Why is the display layout of my Sigma PC 3FT sport watch different from what is shown in the manual?

The display layout of your Sigma PC 3FT sport watch may appear different from what is shown in the manual due to various reasons. Here are some possible explanations: 1. Different language settings: The manual may show the display layout in a specific language, while your watch may be set to a different language. Check the language settings on your watch and adjust them accordingly. 2. Firmware updates: The manufacturer may have released firmware updates for the watch, which could have introduced changes to the display layout. Make sure your watch is running the latest firmware version by checking for updates on the manufacturer's website or through their official app. 3. Customization options: The Sigma PC 3FT sport watch may offer customization options for the display layout. It is possible that the layout shown in the manual is a default setting, and you have personalized the display according to your preferences. Refer to the watch's settings menu to explore customization options and adjust the display layout as desired. If none of these explanations resolve the issue, consult the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I set the time on my Sigma PC 3FT sport watch?

To set the time on your Sigma PC 3FT sport watch, follow these steps: 1. Make sure the watch is in sleep mode, where only the time is displayed. 2. Press and hold the function button for 4 seconds until you see the word "hold" and the time format (either 24-hour or 12-hour) flashing on the display. 3. Use the function button to choose between the 24-hour and 12-hour time format. 4. Wait for the display to automatically change to the next setting. 5. Set the current time in hours by repeatedly pressing the function button. 6. Wait for the display to change to the next setting. 7. Set the first digit of the minute setting by repeatedly pressing the function button. 8. Wait for the display to change to the next setting. 9. Set the second digit of the minute setting by repeatedly pressing the function button. 10. Wait for the display to indicate that the time is now set. 11. The watch will now display the current time. By following these steps, you can easily set the time on your Sigma PC 3FT sport watch.

Why is the heart rate frequency not being displayed during my training session with the Sigma PC 3FT sport watch?

The heart rate frequency may not be displayed during your training session with the Sigma PC 3FT sport watch due to the following reasons: 1. Incorrect placement: Ensure that you are wearing the heart rate monitor strap correctly and that it is securely fastened around your chest, just below the chest muscles. The watch needs to be in contact with your skin to accurately measure your heart rate. 2. Weak battery: If the battery of your Sigma PC 3FT sport watch is low, it may affect the display and prevent the heart rate frequency from being shown. Replace the battery with a new CR 2032 battery to ensure optimal performance. 3. Incorrect measurement technique: Make sure you are following the correct measurement technique. Keep your fingers on the contacts of the watch until the largest heart symbol is visible on the display. Avoid wearing the watch on your sleeve or using gloves during measurement, as it may interfere with the accuracy of the readings. 4. Body movement: Excessive movement or improper positioning of the watch during exercise can affect the accuracy of heart rate measurements. Ensure that the watch remains in place and that there is minimal movement during your training session. If the issue persists, refer to the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I end a training session on my Sigma PC 3FT sport watch?

To end a training session on your Sigma PC 3FT sport watch, follow these steps: 1. While in training mode, press and hold the function button for 2 seconds until the watch displays the pause symbol. 2. Press the function button again to stop the training session. 3. The watch will display a summary of your training session, showing the duration, distance, average heart rate, and other relevant information. 4. To save the training session, press and hold the function button for 2 seconds until the watch displays the save symbol. 5. The watch will then return to the main screen, indicating that the training session has been successfully ended and saved. By following these steps, you can easily end a training session on your Sigma PC 3FT sport watch and save the data for future reference or analysis.

How do I check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch?

To check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch, follow these steps: 1. Open the packaging of the Sigma PC 3FT sport watch. 2. Take out all the items and lay them out on a flat surface. 3. Compare the items with the list of packaging contents mentioned in the manual. 4. Ensure that the following items are present: - Sigma PC 3FT sport watch - Heart rate monitor strap - User manual - Warranty card (if applicable) - Any additional accessories or components mentioned in the packaging contents list. 5. Verify that each item matches the description and specifications mentioned in the manual. 6. If any item is missing or does not match the description, contact the customer support of Sigma SPORT for assistance. 7. Once you have confirmed that all the mentioned contents are included, you can proceed with setting up and using your Sigma PC 3FT sport watch. By following these steps, you can ensure that you have received all the necessary items mentioned in the packaging of the Sigma PC 3FT sport watch.

Why is the display layout of my Sigma PC 3FT sport watch different from what is shown in the manual?

The display layout of your Sigma PC 3FT sport watch may appear different from what is shown in the manual due to various reasons. Here are some possible explanations: 1. Different language settings: The manual may show the display layout in a specific language, while your watch may be set to a different language. Check the language settings on your watch and adjust them accordingly. 2. Firmware updates: The manufacturer may have released firmware updates for the watch, which could have introduced changes to the display layout. Make sure your watch is running the latest firmware version by checking for updates on the manufacturer's website or through their official app. 3. Customization options: The Sigma PC 3FT sport watch may offer customization options for the display layout. It is possible that the layout shown in the manual is a default setting, and you have personalized the display according to your preferences. Refer to the watch's settings menu to explore customization options and adjust the display layout as desired. If none of these explanations resolve the issue, consult the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I set the time on my Sigma PC 3FT sport watch?

To set the time on your Sigma PC 3FT sport watch, follow these steps: 1. Make sure the watch is in sleep mode, where only the time is displayed. 2. Press and hold the function button for 4 seconds until you see the word "hold" and the time format (either 24-hour or 12-hour) flashing on the display. 3. Use the function button to choose between the 24-hour and 12-hour time format. 4. Wait for the display to automatically change to the next setting. 5. Set the current time in hours by repeatedly pressing the function button. 6. Wait for the display to change to the next setting. 7. Set the first digit of the minute setting by repeatedly pressing the function button. 8. Wait for the display to change to the next setting. 9. Set the second digit of the minute setting by repeatedly pressing the function button. 10. Wait for the display to indicate that the time is now set. 11. The watch will now display the current time. By following these steps, you can easily set the time on your Sigma PC 3FT sport watch.

Why is the heart rate frequency not being displayed during my training session with the Sigma PC 3FT sport watch?

The heart rate frequency may not be displayed during your training session with the Sigma PC 3FT sport watch due to the following reasons: 1. Incorrect placement: Ensure that you are wearing the heart rate monitor strap correctly and that it is securely fastened around your chest, just below the chest muscles. The watch needs to establish a proper connection with the heart rate monitor to display the frequency. 2. Weak battery: If the battery level is low, it may affect the functionality of the heart rate monitor. Replace the battery with a new CR 2032 battery to ensure optimal performance. 3. Interference or signal loss: Check for any interference from other electronic devices or strong electromagnetic fields that may disrupt the heart rate signal. Move away from such sources to improve the signal reception. 4. Sweaty or dry skin: Ensure that the contacts on the heart rate monitor strap are moistened with water or electrode gel to improve the conductivity between the strap and your skin. Dry skin or excessive sweat can affect the accuracy of the heart rate measurement. If the issue persists, consult the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I end a training session on my Sigma PC 3FT sport watch?

To end a training session on your Sigma PC 3FT sport watch, follow these steps: 1. While in training mode, press and hold the function button for 2 seconds until the watch displays the pause symbol. 2. Press the function button again to stop the training session. 3. The watch will display a summary of your training session, showing the duration, distance, average heart rate, and other relevant information. 4. Press the function button to exit the summary screen and return to the main display. 5. If you want to save the training session, press and hold the function button for 2 seconds until the watch displays the save symbol. Press the function button again to confirm and save the session. 6. If you do not wish to save the session, simply press the mode button to discard the session and return to the main display. By following these steps, you can easily end a training session on your Sigma PC 3FT sport watch and either save or discard the session based on your preference.

How do I check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch?

To check if all the contents mentioned in the packaging are included with the Sigma PC 3FT sport watch, follow these steps: 1. Open the packaging of the Sigma PC 3FT sport watch. 2. Take out all the items and lay them out on a flat surface. 3. Compare the items with the list of packaging contents mentioned in the manual. 4. Ensure that the following items are present: - Sigma PC 3FT sport watch - Heart rate monitor strap - User manual - Warranty card (if applicable) - Any additional accessories or components mentioned in the packaging contents list. 5. Verify that each item matches the description and is in good condition. 6. If any item is missing or damaged, contact the customer support of Sigma SPORT for assistance. 7. Once you have confirmed that all the mentioned contents are included and in proper condition, you can proceed with setting up and using your Sigma PC 3FT sport watch. By following these steps, you can easily check if all the contents mentioned in the packaging are included with your Sigma PC 3FT sport watch.

Why is the display layout of my Sigma PC 3FT sport watch different from what is shown in the manual?

The display layout of your Sigma PC 3FT sport watch may appear different from what is shown in the manual due to various reasons. Here are some possible explanations: 1. Different language settings: The manual may show the display layout in a specific language, while your watch may be set to a different language. Check the language settings on your watch and adjust them accordingly. 2. Firmware updates: The manufacturer may have released firmware updates for the watch, which could have introduced changes to the display layout. Make sure your watch is running the latest firmware version by checking for updates on the manufacturer's website or through their official app. 3. Customization options: The Sigma PC 3FT sport watch may offer customization options for the display layout. It is possible that the layout shown in the manual is a default setting, and you have personalized the display according to your preferences. Refer to the watch's settings menu to explore customization options and adjust the display layout as desired. If none of these explanations resolve the issue, consult the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I set the time on my Sigma PC 3FT sport watch?

To set the time on your Sigma PC 3FT sport watch, follow these steps: 1. Make sure the watch is in sleep mode, where only the time is displayed. 2. Press and hold the function button for 4 seconds until you see the word "hold" and the time format (either 24-hour or 12-hour) flashing on the display. 3. Use the function button to choose between the 24-hour and 12-hour time format. 4. Wait for the display to automatically change to the next setting. 5. Set the current time in hours by repeatedly pressing the function button. 6. Wait for the display to change to the next setting. 7. Set the first digit of the minute setting by repeatedly pressing the function button. 8. Wait for the display to change to the next setting. 9. Set the second digit of the minute setting by repeatedly pressing the function button. 10. Wait for the display to indicate that the time is now set. 11. The watch will now display the current time. By following these steps, you can easily set the time on your Sigma PC 3FT sport watch.

Why is the heart rate frequency not being displayed during my training session with the Sigma PC 3FT sport watch?

The heart rate frequency may not be displayed during your training session with the Sigma PC 3FT sport watch due to the following reasons: 1. Incorrect placement: Ensure that you are wearing the heart rate monitor strap correctly and that it is securely fastened around your chest, just below the chest muscles. The watch needs to be in close contact with your skin to accurately measure your heart rate. 2. Weak battery: If the battery of your Sigma PC 3FT sport watch is low, it may affect the display and the heart rate measurement. Replace the battery with a new CR 2032 battery to ensure optimal performance. 3. Interference or signal loss: Check for any interference from other electronic devices or strong electromagnetic fields that may disrupt the heart rate signal. Move away from such sources to improve the signal reception. 4. Sweaty or dry skin: Ensure that your skin is clean and dry before wearing the heart rate monitor strap. Excessive sweat or dryness can affect the conductivity and accuracy of the heart rate measurement. 5. Movement or improper contact: During intense physical activity, excessive movement or improper contact with the heart rate monitor strap can lead to inaccurate readings. Make sure the strap is snugly fitted and stays in place during your training session. If the issue persists, refer to the troubleshooting section of the manual or contact the customer support of Sigma SPORT for further assistance.

How do I end a training session on my Sigma PC 3FT sport watch?

To end a training session on your Sigma PC 3FT sport watch, follow these steps: 1. During your training session, press and hold the function button for a few seconds until the stopwatch stops. 2. The watch will automatically enter the rest mode after a short period of time. 3. To view the last training time, press the function button briefly. 4. If you want to clear the last training time, refer to section 2.2 of the manual for instructions on how to do so. By following these steps, you can easily end a training session on your Sigma PC 3FT sport watch.

Is the manual of the Sigma PC 3FT available in English?

Yes, the manual of the Sigma PC 3FT is available in English .

Is your question not listed? Ask your question here

No results