View the manual for the Siemens WT48Y890GB here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Siemens WT48Y890GB or do you need help? Ask your question here




The Siemens WT48Y890GB is a freestanding dryer that offers a drum volume of 112 liters, providing ample space for drying a large amount of laundry. The door hinge is located on the right side, allowing for convenient access to the drum. Equipped with a condensation drying system, this dryer effectively removes moisture from clothes, resulting in quicker drying times. The control panel features a combination of buttons and touch controls, allowing for easy and intuitive operation. With an energy efficiency class of A+++, the Siemens WT48Y890GB is highly energy-efficient, helping to reduce electricity consumption. It consumes 1.42 kWh of energy per cycle and has an annual energy consumption of 175 kWh, making it a cost-effective choice for eco-conscious consumers. The dryer utilizes electric heat as its heat source, ensuring reliable and consistent drying performance. In terms of power consumption, it consumes only 0.13 W when in the off state or standby mode, minimizing energy wastage. The cycle time for this dryer is 240 minutes, providing sufficient time for thorough and efficient drying. It falls under drying class A, indicating high performance in terms of moisture removal. Overall, the Siemens WT48Y890GB combines efficient drying capabilities with user-friendly controls and energy-saving features, making it a practical choice for those in need of a reliable and eco-friendly dryer.

| Brand | Siemens |
| Model | WT48Y890GB | WT48Y890GB |
| Product | dryer |
| EAN | 4242003708118 |
| Language | English |
| Filetype | Installation Guide (PDF) |
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Drum volume | 112 L |
| Door hinge | Right |
| Drying system | Condensation |
| Product color | Stainless steel, White |
| Control type | Buttons, Touch |
| Drum material | Stainless steel |
| Cord length | 1.45 m |
| Built-in display | Yes |
| Display type | TFT |
| Reversible doors | Yes |
| Energy efficiency class | A+++ |
| Energy consumption | 1.42 kWh |
| Annual energy consumption | 175 kWh |
| Heat source | Electric |
| Power consumption (off) | 0.13 W |
| Power consumption (standby) | 0.13 W |
| Connected load | 1000 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Current | 10 A |
| Cycle time | 240 min |
| Drying class | A |
| Drum capacity | 9 kg |
| Noise level | 61 dB |
| Anti-Crease function | Yes |
| Anti-Crease cycle | 120 min |
| Wool, Quick, Jeans/denim, Shoes, Pillow, Blouse/shirt, Cotton, Synthetics |
| Height | 842 mm |
| Width | 598 mm |
| Depth | 599 mm |
| Weight | 55000 g |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Drum interior light | Yes |
| Child lock | Yes |
| Self-cleaning | Yes |
| Water tank full indicator | Yes |
| Remaining time indication | Yes |
| LED program stage indicator | - |
| Buzzer | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT48Y890GB below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WT48Y890GB has a weight of 55000 g.
The Siemens WT48Y890GB has a height of 842 mm.
The Siemens WT48Y890GB has a width of 598 mm.
The Siemens WT48Y890GB has a depth of 599 mm.
The Siemens WT48Y890GB has energy label A+++.
The drum volume of Siemens WT48Y890GB is 112 L. This means that it has a spacious drum, allowing for larger loads of laundry to be dried at once.
Yes, Siemens WT48Y890GB has a condensation drying system. This means that it collects the moisture from the air and turns it into water, which can be emptied manually or drained continuously.
The energy consumption of Siemens WT48Y890GB is 1.42 kWh. This means that it is an energy-efficient dryer, helping to save on electricity bills compared to less efficient models.
The noise level of Siemens WT48Y890GB is 61 dB. This indicates that it operates quietly, providing a peaceful environment while drying clothes.
The rated capacity of Siemens WT48Y890GB is 9 kg. This means that it can accommodate large loads of laundry, making it suitable for households with a high volume of laundry.
The Siemens WT48Y890GB dryer is intended for private domestic use only. It should not be installed or operated in areas that are prone to frost and outdoor conditions, as this can cause damage to the appliance. The dryer is specifically designed for drying and freshening up domestic laundry that has been washed with water and is suitable for tumble drying, as indicated by the item label. Using the appliance for any other purpose is not recommended. Before using the appliance, it is important to check for any visible damage. If the appliance is damaged, do not operate it and contact your specialist dealer or customer service for assistance. Make sure to read and follow the operating and installation instructions provided with the appliance. When it comes to safety, it is essential to take necessary precautions and proceed with care. Children and individuals with reduced physical, sensory, or mental capacity should be supervised or instructed on how to use the appliance safely. It is important to understand the potential risks associated with using the appliance. Additionally, it is recommended to use genuine spare parts and accessories to avoid any potential risks or damage. Avoid using cleaning agents or pretreating laundry products that may come into contact with the surfaces of the appliance. Clean the appliance using only water and a soft, damp cloth, and remove any detergent or residue immediately. Please note that the information provided is based on the manual for the Siemens WT48Y890GB dryer and is intended as a general guide. For detailed instructions and guidelines, refer to the complete manual.
If the Siemens WT48Y890GB dryer is not drying the laundry properly, you can try the following steps: 1. Check the load: Make sure you are not overloading the dryer. Exceeding the maximum load capacity can affect the drying performance. Remove any excess laundry if necessary. 2. Adjust the dryness level: If the laundry feels damp after the program ends, you can finely adjust the dryness level. This extends the drying time without increasing the temperature, allowing your laundry to become drier. 3. Select a longer program or increase the drying level: If the laundry is still not drying properly, you can try selecting a program with a longer drying time or increasing the drying level. This does not increase the temperature but can improve the drying performance. 4. Use a timed program for subsequent drying: If certain items of laundry are still damp, you can select a timed program specifically for subsequent drying. This allows you to dry the remaining damp laundry without affecting the already dry items. 5. Clean the moisture sensor: The moisture sensor in the drum may become covered with limescale or residues from detergents and care products, which can impair its function. Cleaning the moisture sensor can help ensure proper drying. Please note that these steps are general troubleshooting suggestions based on the Siemens WT48Y890GB dryer manual. For more specific instructions or if the issue persists, it is recommended to refer to the complete manual or contact customer service for further assistance.
To ensure the safety of children and individuals with reduced physical capacity when using the Siemens WT48Y890GB dryer, follow these steps: 1. Supervision: Do not allow children to clean or maintain the appliance unsupervised. Keep children under 3 years old and pets away from the dryer. Do not leave the appliance unattended when children or individuals who cannot assess the risks are nearby. 2. Positioning: Avoid placing the dryer behind a door, as this may obstruct the appliance door or prevent it from opening completely. 3. Packaging and chemicals: Keep packaging, plastic film, and packing components away from children to prevent suffocation. Detergents and care products can be poisonous if consumed, so store them out of the reach of children. In case of accidental ingestion, seek medical advice. Contact with detergents or care products may cause eye or skin irritation, so rinse thoroughly if contact occurs. 4. Weight and climbing: Do not support your weight on the appliance door when it is open, as it may tip over and cause injury. Avoid climbing onto the appliance, as the worktop may break. Wait until the drum has stopped rotating before reaching into it to prevent hand injuries. 5. Load capacity and maintenance: Do not exceed the maximum load capacity specified for each program to avoid material damage or damage to the appliance. Always use a functioning fluff filter and keep light objects, foam, and foam rubber away from the dryer to prevent damage. These steps will help ensure the safety of children and individuals with reduced physical capacity when using the Siemens WT48Y890GB dryer.
If the Siemens WT48Y890GB dryer does not start or respond when you try to load and start it, you can follow these steps: 1. Check the power supply: Ensure that the dryer is properly plugged into a functioning power outlet. Check the fuse or circuit breaker to make sure there is power supply to the outlet. 2. Select a program: Make sure you have selected a program for drying. The dryer will not start if no program is selected. Refer to the program selection section in the manual for instructions on how to choose a program. 3. Close the door: Ensure that the dryer door is fully closed. The dryer will not start if the door is not properly closed and latched. 4. Deactivate childproof lock: If the childproof lock is activated, the dryer will not start. Deactivate the childproof lock according to the instructions in the manual. 5. Check for error messages: If there are any error messages or indicators on the display panel, refer to the troubleshooting section in the manual for specific instructions on how to resolve the issue. If the issue persists after following these steps, it is recommended to contact customer service or a qualified technician for further assistance.
To ensure optimal performance of the Siemens WT48Y890GB dryer, it is recommended to clean the fluff filter after every drying cycle. Follow these steps to clean the fluff filter: 1. Pull apart the two-part fluff filter. 2. Open both filters and remove all the fluff. 3. Rinse away the fluff under warm, running water. 4. Dry the fluff filter thoroughly. 5. Close the fluff filter and reinsert the two-part fluff filter. It is important not to operate the dryer without a fluff filter or if the fluff filter is defective, as this may damage the dryer. In addition to cleaning the fluff filter, it is also necessary to clean the filter in the condensate container. Follow these steps to clean the filter in the condensate container: 1. Pull out the condensate container horizontally. 2. Pour out the condensation water. 3. Remove the filter from the condensate container. 4. Clean the filter under warm, running water or in the dishwasher. 5. Push the filter back into the condensate container until it locks into place. 6. Push the condensate container back into the dryer until it locks into place. Remember to always operate the dryer with the filter inserted to prevent contamination and potential damage. Regularly cleaning the fluff filter and the filter in the condensate container will help maintain the performance and efficiency of the Siemens WT48Y890GB dryer.
Yes, the manual of the Siemens WT48Y890GB is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0