View the manual for the Siemens WT47XE40 here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Siemens WT47XE40 or do you need help? Ask your question here




| Brand | Siemens |
| Model | WT47XE40 | WT47XE40 |
| Product | dryer |
| EAN | 4242003858158 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Built-in display | Yes |
| Display type | TFT |
| Control type | Rotary, Touch |
| Door hinge | Left |
| Door style | Glass window door |
| Door color | Transparent |
| Product color | White |
| Drying system | - |
| Reversible doors | Yes |
| Inverter technology | - |
| Cord length | 1.45 m |
| Drum volume | 112 L |
| Certification | CE, VDE |
| Wi-Fi controlled | Yes |
| Near Field Communication (NFC) | - |
| Self-cleaning | Yes |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Drum interior light | Yes |
| Child lock | Yes |
| Filter cleaning indicator | - |
| Water level indicator | - |
| Energy efficiency class | A+++ |
| Annual energy consumption | 193 kWh |
| Heat source | Electric |
| Energy consumption | 1.61 kWh |
| Power consumption (off) | 0.1 W |
| Energy efficiency scale | A+++ to D |
| Connected load | 1000 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Current | 10 A |
| Drum capacity | 9 kg |
| Cycle time | 168 min |
| Drying class | B |
| Noise level | 62 dB |
| Wool, Mix, Quick, Pillow, Blouse/shirt, Lingerie, Cotton, Towel | |
| Anti-Crease function | Yes |
| Anti-Crease cycle | 120 min |
| Moisture sensor | Yes |
| Adjustable spin speed | - |
| Width | 598 mm |
| Depth | 599 mm |
| Height | 842 mm |
| Depth with door open | 1069 mm |
| Weight | 56550 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT47XE40 below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WT47XE40 has a weight of 56550 g.
The Siemens WT47XE40 has the following certifications: CE, VDE.
The Siemens WT47XE40 has a height of 842 mm.
The Siemens WT47XE40 has a width of 598 mm.
The Siemens WT47XE40 has a depth of 599 mm.
The Siemens WT47XE40 has energy label A+++.
To troubleshoot if you are unable to connect the Siemens WT47XE40 dryer to Home Connect, follow these steps: 1. Check your Wi-Fi connection: Ensure that your Wi-Fi network is working properly and that the dryer is within range of the network. Make sure you have the correct Wi-Fi password entered. 2. Restart the dryer and the Home Connect app: Turn off the dryer and close the Home Connect app on your smartphone. Wait for a few seconds, then turn on the dryer and reopen the app. 3. Reset the Home Connect connection: On the dryer's control panel, navigate to the Home Connect settings and select the option to reset the connection. Follow the on-screen instructions to complete the reset process. 4. Update the Home Connect app: Check if there are any updates available for the Home Connect app on your smartphone. Update the app to the latest version if necessary. 5. Contact customer support: If the above steps do not resolve the issue, contact Siemens customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the dryer. Remember, the availability of Home Connect services may vary depending on your country, so it's important to check if the service is available in your region.
If the Home Connect app does not show the correct content for your Siemens WT47XE40 dryer, you can try the following steps to troubleshoot the issue: 1. Check your internet connection: Ensure that your smartphone or device is connected to a stable and reliable internet connection. Poor internet connectivity can affect the app's ability to display the correct content. 2. Update the Home Connect app: Check if there are any updates available for the Home Connect app on your smartphone. Updating the app to the latest version can help resolve any compatibility issues and ensure that you have access to the most up-to-date content. 3. Restart the app: Close the Home Connect app completely and then reopen it. This can help refresh the app and may resolve any temporary glitches or errors. 4. Reinstall the Home Connect app: If the issue persists, try uninstalling the Home Connect app from your smartphone and then reinstalling it. This can help resolve any software-related issues that may be causing the incorrect content display. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to reach out to Siemens customer support for further assistance. They can provide specific troubleshooting steps or guide you through any additional troubleshooting processes. Remember, the availability of Home Connect services may vary depending on your country, so it's important to check if the service is available in your region.
To troubleshoot if the PLC_X_Control feature of the Siemens WT47XE40 dryer is not working properly, follow these steps: 1. Check the connection: Ensure that the dryer is properly connected to the power source and that the power supply is stable. Make sure the dryer is turned on. 2. Verify the settings: Check the settings on the dryer's control panel to ensure that the PLC_X_Control feature is enabled. Refer to the user manual for instructions on how to access and adjust the settings. 3. Restart the dryer: Turn off the dryer and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset the system and resolve any temporary issues. 4. Update the firmware: Check if there are any firmware updates available for the Siemens WT47XE40 dryer. If so, follow the instructions provided in the user manual to update the firmware. Firmware updates can often fix bugs and improve the performance of the appliance. 5. Contact customer support: If the issue persists after following the above steps, it is recommended to contact Siemens customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the dryer. Remember, the troubleshooting steps may vary depending on the specific issue you are experiencing. It is always advisable to consult the user manual or contact customer support for accurate and detailed guidance.
To troubleshoot if you are unable to connect the Siemens WT47XE40 dryer to Home Connect in Danish, follow these steps: 1. Check the Home Connect availability: Ensure that Home Connect services are available in your country. The availability of Home Connect functions depends on the availability of Home Connect services in your region. 2. Verify the app content: Make sure that the Home Connect app is displaying the correct content for the Siemens WT47XE40 dryer. The app content is dynamic and may vary depending on the paired appliance and your country. 3. Check the language settings: Confirm that the language settings in the Home Connect app are set to Danish. This ensures that the app displays the content in the correct language. 4. Restart the app and the dryer: Close the Home Connect app on your smartphone and reopen it. Also, turn off the Siemens WT47XE40 dryer and then turn it back on. This can help refresh the connection and resolve any temporary issues. 5. Contact customer support: If the issue persists, it is recommended to contact Siemens customer support for further assistance. They can provide specific troubleshooting steps or guide you through the process of connecting the dryer to Home Connect in Danish. Remember, the availability of Home Connect services may vary depending on your country, so it's important to check if the service is available in your region.
To troubleshoot if you are unable to connect the Siemens WT47XE40 dryer to Home Connect in Czech, follow these steps: 1. Check the Home Connect availability: Ensure that Home Connect services are available in your country. The availability of Home Connect functions depends on the availability of Home Connect services in your region. 2. Verify the app content: Make sure that the Home Connect app is displaying the correct content for the Siemens WT47XE40 dryer. The app content is dynamic and may vary depending on the paired appliance and your country. 3. Check the language settings: Confirm that the language settings in the Home Connect app are set to Czech. This ensures that the app displays the content in the correct language. 4. Restart the app and the dryer: Close the Home Connect app on your smartphone and reopen it. Also, turn off the Siemens WT47XE40 dryer and then turn it back on. This can help refresh the connection and resolve any temporary issues. 5. Contact customer support: If the issue persists, it is recommended to contact Siemens customer support for further assistance. They can provide specific troubleshooting steps or guide you through the process of connecting the dryer to Home Connect in Czech. Remember, the availability of Home Connect services may vary depending on your country, so it's important to check if the service is available in your region.
To troubleshoot if you are unable to connect the Siemens WT47XE40 dryer to Home Connect, follow these steps: 1. Check your Wi-Fi connection: Ensure that your Wi-Fi network is working properly and that the dryer is within range of the network. Make sure you have the correct Wi-Fi password entered. 2. Restart the dryer and the Home Connect app: Turn off the dryer and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. Also, close the Home Connect app on your smartphone and reopen it. 3. Reset the Home Connect settings: On the dryer's control panel, navigate to the Home Connect settings and select the option to reset the connection. Follow the on-screen instructions to complete the reset process. 4. Update the Home Connect app: Check if there are any updates available for the Home Connect app on your smartphone. Update the app to the latest version if necessary. 5. Contact customer support: If the above steps do not resolve the issue, reach out to Siemens customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the dryer. Remember, these steps are general troubleshooting guidelines. For more detailed instructions or specific troubleshooting steps, refer to the Siemens WT47XE40 dryer manual or contact Siemens customer support.
If the Home Connect app is not showing the correct content for your Siemens WT47XE40 dryer, you can try the following steps to troubleshoot the issue: 1. Check your internet connection: Ensure that your smartphone or device is connected to a stable and reliable internet connection. Poor internet connectivity can affect the app's ability to display the correct content. 2. Update the Home Connect app: Check if there are any updates available for the Home Connect app on your smartphone. Updating the app to the latest version can help resolve any compatibility issues and ensure that you have access to the most up-to-date content. 3. Restart the app: Close the Home Connect app completely and then reopen it. This can help refresh the app and may resolve any temporary glitches or errors. 4. Reboot your smartphone or device: If restarting the app doesn't work, try restarting your smartphone or device. This can help clear any temporary issues that may be affecting the app's performance. 5. Contact Siemens customer support: If the issue persists, it is recommended to reach out to Siemens customer support for further assistance. They can provide specific troubleshooting steps or address any technical issues related to the Home Connect app. Remember, these steps are general troubleshooting guidelines. For more detailed instructions or specific troubleshooting steps, refer to the Siemens WT47XE40 dryer manual or contact Siemens customer support.
To troubleshoot if the PLC_X_Control feature is not working properly on your Siemens WT47XE40 dryer, follow these steps: 1. Check the Home Connect app compatibility: Ensure that your smartphone or device meets the minimum requirements for the Home Connect app. Make sure you have the latest version of the app installed. 2. Verify the connection: Ensure that your Siemens WT47XE40 dryer is properly connected to your home network. Check the Wi-Fi settings on the dryer and ensure it is connected to the same network as your smartphone or device. 3. Restart the dryer and the app: Turn off the Siemens WT47XE40 dryer and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. Also, close the Home Connect app on your smartphone or device and reopen it. 4. Reset the PLC_X_Control settings: On the dryer's control panel, navigate to the PLC_X_Control settings and select the option to reset the feature. Follow the on-screen instructions to complete the reset process. 5. Contact Siemens customer support: If the issue persists, it is recommended to reach out to Siemens customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the dryer. Remember, these steps are general troubleshooting guidelines. For more detailed instructions or specific troubleshooting steps, refer to the Siemens WT47XE40 dryer manual or contact Siemens customer support.
To connect the Siemens WT47XE40 dryer to Home Connect in Danish, follow these steps: 1. Åbn Home Connect-appen: Start med at åbne Home Connect-appen på din smartphone eller enhed. 2. Opret en konto: Hvis du ikke allerede har en konto, skal du oprette en ved at følge instruktionerne i appen. 3. Tilføj dit apparat: Gå til indstillingerne i Home Connect-appen og vælg "Tilføj apparat". Vælg Siemens WT47XE40-tørretumbleren fra listen over tilgængelige enheder. 4. Følg installationsvejledningen: Følg trinene i installationsvejledningen i appen for at oprette forbindelse mellem tørretumbleren og Home Connect. 5. Test forbindelsen: Når installationen er fuldført, kan du teste forbindelsen ved at starte og overvåge tørretumbleren fra appen. Hvis du stadig har problemer med at oprette forbindelse til Home Connect, anbefales det at kontakte Siemens kundesupport for yderligere assistance. De kan give specifikke fejlfindingstrin eller arrangere en tekniker til at inspicere tørretumbleren. Bemærk, at disse trin er generelle retningslinjer for at oprette forbindelse til Home Connect. For mere detaljerede instruktioner eller specifikke fejlfindingstrin, henvises der til Siemens WT47XE40-tørretumblerens manual eller kontakt Siemens kundesupport.
To troubleshoot if you are unable to connect the Siemens WT47XE40 dryer to Home Connect in Czech, follow these steps: 1. Verify Home Connect availability: Check if Home Connect services are available in your country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. 2. Check app content: Ensure that the Home Connect app content is available in Czech. The content of the app is dynamic and dependent on the paired appliance and your country. If the app content is not available in Czech, it may not be possible to connect the dryer to Home Connect in Czech. 3. Check device compatibility: Ensure that your smartphone or device meets the minimum requirements for the Home Connect app. Make sure you have the latest version of the app installed. 4. Restart the dryer and the app: Turn off the Siemens WT47XE40 dryer and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. Also, close the Home Connect app on your smartphone or device and reopen it. 5. Contact Siemens customer support: If the issue persists, it is recommended to reach out to Siemens customer support for further assistance. They can provide specific troubleshooting steps or address any technical issues related to connecting the dryer to Home Connect in Czech. Remember, these steps are general troubleshooting guidelines. For more detailed instructions or specific troubleshooting steps, refer to the Siemens WT47XE40 dryer manual or contact Siemens customer support.
Yes, the Siemens WT47XE40 is a freestanding dryer. This means it can be placed anywhere and does not need to be installed into a specific space.
Yes, the Siemens WT47XE40 can be controlled via Wi-Fi. This allows users to conveniently control and monitor the dryer remotely through their smartphones or other compatible devices.
Yes, the Siemens WT47XE40 has a self-cleaning function. This means that it can automatically clean itself, reducing maintenance and ensuring optimal performance over time.
Yes, the Siemens WT47XE40 has a built-in display. This display provides users with clear and easy-to-read information about the dryer's settings, progress, and other relevant data.
Yes, the Siemens WT47XE40 has a glass window door. This allows users to easily see inside the dryer and check on their laundry without having to open the door, saving time and energy.
Yes, the manual of the Siemens WT47XE40 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0