View the manual for the Siemens WT46W580EE here, for free. This manual comes under the category dryers and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Siemens WT46W580EE or do you need help? Ask your question here



| Appliance placement | Freestanding |
| Cord length | 1.45 m |
| Loading type | Front-load |
| Door hinge | Right |
| Product color | White |
| Display type | LCD |
| Cycle time | 150 min |
| Noise level | 65 dB |
| Drum capacity | 7 kg |
| Delay start (max) | 24 h |
| Delayed start timer | Yes |
| Energy consumption | 1.6 kWh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Connected load | 1500 W |
| Energy efficiency class | A |
| Current | 10 A |
| Width | 598 mm |
| Depth | 625 mm |
| Height | 842 mm |
| Weight | 55000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT46W580EE below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WT46W580EE has a weight of 55000 g.
The Siemens WT46W580EE has a height of 842 mm.
The Siemens WT46W580EE has a width of 598 mm.
The Siemens WT46W580EE has a depth of 625 mm.
The Siemens WT46W580EE has energy label A.
Yes, Siemens WT46W580EE is a freestanding dryer. This means that it can be placed anywhere without the need for installation or mounting.
Yes, Siemens WT46W580EE has a delayed start timer. This allows the user to set a specific time for the dryer to start its cycle, providing convenience and flexibility.
The rated capacity of Siemens WT46W580EE is 7 kg. This means that it can handle a maximum load of 7 kg of laundry, making it suitable for smaller households or individuals.
The noise level of Siemens WT46W580EE is 65 dB. This indicates that it produces a moderate amount of noise during operation, which may be noticeable but should not be overly disruptive.
Siemens WT46W580EE consumes 1.6 kWh of energy. This energy consumption rate is considered relatively low, making it an energy-efficient option compared to other dryers on the market.
To prepare the Siemens WT46W580EE dryer for use, follow these steps: 1. Check the dryer for any transport damage and ensure that it is in good condition. 2. Make sure you have assistance when lifting the heavy dryer to avoid any injuries. 3. Avoid sharp edges while handling the dryer. 4. Install the dryer in a room that is not susceptible to frost, as water may cause damage when it freezes. 5. If you're unsure about the installation process, it's recommended to have the appliance connected by a specialist. 6. Do not lift the dryer by any protruding parts, such as the door, as they may break off. 7. Ensure that the appliance plug is always accessible. 8. Install the dryer on a clean, level, and firm surface. 9. Avoid obstructing the air inlet on the front of the dryer. 10. Keep the area around the dryer clean. 11. Level the dryer using the threaded feet and a spirit level. 12. Do not remove the threaded feet under any circumstances. 13. Connect the dryer to an AC earthed socket, and make sure the mains voltage matches the voltage shown on the rating plate. 14. The connected load and necessary fuse protection are specified on the rating plate. By following these steps, you can properly prepare the Siemens WT46W580EE dryer for use.
To select and adjust the drying programmes on the Siemens WT46W580EE dryer, follow these steps: 1. Open the door of the dryer. 2. Sort and load your laundry into the drum. Make sure to remove any objects from pockets and pay attention to items like cigarette lighters. 3. Refer to the programme overview on page 7 of the manual to select the appropriate drying programme for your laundry. 4. Press the "inicio/stop" (Start/Stop) button to start the selected programme. Ensure that your hands are dry and only hold the plug by the plug casing. 5. If you need to change any settings, such as the drying time or temperature, use the programme selector and display panel. The buttons are sensitive and only need to be lightly touched. 6. To interrupt the drying cycle and add or remove laundry, open the door and make the necessary adjustments. Close the door and press the "inicio/stop" button to continue the programme. 7. After the drying cycle is complete, turn the programme selector to "Ο(Off)" to switch off the dryer. 8. Remove your laundry from the drum, taking advantage of the automatic anti-crease function that keeps the laundry loose and fluffy for up to 30 minutes. By following these steps, you can easily select and adjust the drying programmes on the Siemens WT46W580EE dryer.
If the Siemens WT46W580EE dryer is not drying your laundry properly, you can try the following steps: 1. Check the fluff filter and clean it if necessary. The fluff filter should be rinsed under running water to remove any lint or debris. 2. Empty the condensation container. Make sure to do this after each drying cycle, not during the drying process. 3. Ensure that the ambient temperature is not higher than 35°C. If it is, ventilate the room to prevent overheating. 4. Check if the air inlet is blocked. Clear any obstructions to ensure proper airflow. 5. Verify that you have selected the correct drying programme for your laundry. Refer to the programme overview in the manual for guidance. 6. Consider the moisture level of your laundry. If it is too dry, the drying time may be too long. Adjust the drying programme accordingly. 7. Ensure that there is enough free space around the dryer for proper air circulation. 8. If there was a power cut, restart the dryer and continue the drying cycle. 9. If you notice a fine layer of limescale on the moisture sensors, clean them as instructed in the manual. 10. If your laundry is still damp, you can try using the next drying programme or the timed programme as a supplement. By following these steps, you can troubleshoot and address issues with the drying performance of the Siemens WT46W580EE dryer.
To properly care for and maintain the Siemens WT46W580EE dryer, follow these steps: 1. Clean the fluff filter after each drying cycle. Rinse it under running water to remove lint and debris. 2. Empty the condensation container regularly to prevent it from overflowing. Do this after each drying cycle, not during. 3. Check the moisture sensors for any limescale buildup. Clean them as instructed in the manual to ensure accurate drying. 4. Wipe the drum and door seal with a damp cloth to remove any residue or lint. 5. Clean the air inlet and outlet regularly to prevent blockages. Use a soft brush or vacuum cleaner to remove dust and lint. 6. Check the power cord and plug for any damage. If you notice any issues, contact a qualified technician for repair or replacement. 7. Avoid overloading the dryer. Follow the recommended load capacity for each drying programme. 8. Keep the area around the dryer clean and free from obstructions to ensure proper airflow. 9. If you won't be using the dryer for an extended period, unplug it and clean the drum and filters before storing. 10. If you encounter any issues or have concerns about the dryer's performance, refer to the troubleshooting section in the manual or contact customer support. By following these steps, you can effectively care for and maintain the Siemens WT46W580EE dryer, ensuring optimal performance and longevity.
Here is some important information about using the Siemens WT46W580EE dryer: 1. Safety Instructions: - Only use the dryer indoors and for drying fabrics. - Do not modify the dryer's technology or properties. - Keep children and pets away from the dryer. - Remove all objects from garment pockets, especially cigarette lighters. 2. Troubleshooting: - If you encounter a fault, contact the after-sales service for assistance. - If the dryer does not start, check if the mains plug is plugged in, the door is closed, and the programme is set. - If water is leaking, ensure that the dryer is level. - If the required degree of dryness is not achieved, rinse the fluff filter and empty the condensation container. 3. Maintenance: - Clean the fluff filter after each drying cycle by rinsing it under running water. - Empty the condensation container regularly. - Check for limescale buildup on the moisture sensors and clean them if necessary. - Wipe the drum and door seal with a damp cloth to remove residue or lint. - Keep the air inlet and outlet clear of obstructions. 4. General Tips: - Do not operate the dryer without the cover cap. - Ensure sufficient ventilation in the room. - Avoid overloading the dryer and follow the recommended load capacity. - If the dryer emits normal noises or vibrations, it is not an error. By following these guidelines, you can safely and effectively use the Siemens WT46W580EE dryer.
Yes, the manual of the Siemens WT46W580EE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0