View the manual for the Siemens WT46W560FG here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Siemens WT46W560FG or do you need help? Ask your question here


| Brand | Siemens |
| Model | WT46W560FG | WT46W560FG |
| Product | dryer |
| EAN | 4242003439883 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Cord length | 1.45 m |
| Loading type | Front-load |
| Door hinge | Right |
| Product color | White |
| Display type | LCD |
| Certification | CE, VDE |
| Maximum spin speed | 1400 RPM |
| Cycle time | 143 min |
| Noise level | 65 dB |
| Drum capacity | 7 kg |
| Delay start (max) | 24 h |
| Delayed start timer | Yes |
| Drum interior light | Yes |
| Energy consumption | 2.2 kWh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Connected load | 1500 W |
| Energy efficiency class | A |
| Current | 10 A |
| Width | 598 mm |
| Depth | 625 mm |
| Height | 842 mm |
| Weight | 55000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT46W560FG below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WT46W560FG has a weight of 55000 g.
The Siemens WT46W560FG has the following certifications: CE, VDE.
The Siemens WT46W560FG has a height of 842 mm.
The Siemens WT46W560FG has a width of 598 mm.
The Siemens WT46W560FG has a depth of 625 mm.
The Siemens WT46W560FG has energy label A.
Yes, the Siemens WT46W560FG has a delayed start timer. This feature allows the user to set a specific time for the dryer to start, which can be convenient for scheduling laundry loads.
The maximum spin speed of the Siemens WT46W560FG is 1400 RPM. This high speed ensures that clothes are thoroughly spun and dried, reducing moisture and drying time.
The energy consumption of the Siemens WT46W560FG is 2.2 kWh. This means that it is an energy-efficient appliance, helping users save on electricity bills and reducing their environmental footprint.
Yes, the Siemens WT46W560FG has a drum interior light. This feature allows users to easily see and retrieve laundry items, especially in low-light conditions.
The noise level of the Siemens WT46W560FG is 65 dB. This noise level is relatively low, providing a quieter drying experience compared to other dryers on the market.
To ensure the safety of using the Siemens WT46W560FG dryer, please follow these steps: 1. Pay attention to the safety instructions provided in the manual, specifically on page 13. 2. During installation, make sure to secure loose cables to avoid tripping hazards. 3. Do not operate the dryer in areas where there is a risk of frost. 4. Connect the dryer to an AC earthed socket according to the specifications provided. This ensures the appliance is completely safe. 5. Use an earth-leakage circuit breaker with the appropriate symbol. 6. Ensure compatibility between the appliance plug and socket. 7. Avoid using multiple plugs/connectors and extension cables. 8. Never touch or hold the appliance plug with wet hands to prevent the risk of electric shock. 9. Load only laundry into the drum and check its contents before switching on the dryer. 10. Do not use the dryer if the laundry has been in contact with solvents, oil, wax, grease, or paint, as this can pose a fire or explosion hazard. 11. Switch off the dryer once the program has ended. 12. Do not use the water from condensation as drinking water, as it may be contaminated with fluff. 13. If the dryer is defective or suspected to be, do not use it and contact the after-sales service for repairs. 14. Use genuine spare parts and accessories for safety reasons. 15. When disposing of the dryer, unplug the appliance plug and cut the mains lead. Dispose of the dryer at an approved public disposal facility. By following these safety guidelines, you can ensure a safe and reliable operation of the Siemens WT46W560FG dryer.
To install and operate the Siemens WT46W560FG dryer, follow these steps: 1. Check the dryer for any transport damage before installation. 2. Ensure that the dryer is installed on a clean, level, and firm surface. 3. Do not obstruct the air inlet on the front of the dryer and keep the area around the dryer clean. 4. Connect the dryer to an AC earthed socket and make sure the mains voltage matches the rating plate. 5. Level the dryer using the threaded feet and do not remove them under any circumstances. 6. Prepare the dryer for frost protection by emptying the condensation container and selecting any program to pump out the condensation. 7. Wait for 5 minutes and then empty the condensation container again before turning the program selector to "Off." 8. When transporting the dryer, ensure it is in a vertical upright position and allow it to stand for two hours before use. 9. Remove all accessories from the drum and ensure the air inlet remains unobstructed. 10. To operate the dryer, refer to the control panel and select the desired program and settings. 11. Clean the heat exchanger, dryer housing, control panel, air intake, and filter regularly according to the instructions provided. 12. Use a damp sponge to clean the moisture sensors inside the dryer door. By following these steps, you can successfully install and operate the Siemens WT46W560FG dryer.
The Siemens WT46W560FG dryer offers a variety of drying programs with their respective settings. Here is an overview of the available programs: 1. Whites/Coloureds: This program is suitable for drying cotton or linen fabrics and can handle a maximum load of 7 kg. You can select different levels of dryness, such as Iron Dry, Cupboard Dry, Cupboard Dry+, Extra Dry, and Easy-care. 2. Shirts: This program is designed for drying shirts made of cotton or linen. It can handle a maximum load of 3 kg and offers options for Freshen Up, Iron Dry, and Cupboard Dry. 3. Sportswear: This program is suitable for drying sportswear and can handle a maximum load of 3.5 kg. It offers options for Iron Dry and Cupboard Dry. 4. Work Clothing: This program is designed for drying work clothing and can handle a maximum load of 3.5 kg. It offers options for Iron Dry and Cupboard Dry. 5. Anoraks: This program is suitable for drying anoraks and can handle a maximum load of 3.5 kg. It offers options for Iron Dry and Cupboard Dry. 6. Towelling/Dressing Gowns: This program is designed for drying towelling and dressing gowns. It can handle a maximum load of 3.5 kg and offers options for Iron Dry and Cupboard Dry. 7. Underwear/Socks: This program is suitable for drying underwear and socks. It can handle a maximum load of 3.5 kg and offers options for Iron Dry and Cupboard Dry. 8. Bed Linen/Table Linen/Terry Towels/Tea Towels/Towels: This program is designed for drying bed linen, table linen, terry towels, tea towels, and towels. It can handle a maximum load of 3.5 kg and offers options for Iron Dry and Cupboard Dry. 9. Mixed: This program is suitable for drying mixed items of laundry made of cotton and easy-care fabrics. It can handle a maximum load of 3 kg and offers options for Iron Dry and Cupboard Dry. 10. Delicates: This program is designed for drying delicate fabrics such as acrylic, polyamide, elastane, or acetate. It offers a low heat setting for gentle drying. 11. Outdoor: This program is suitable for drying fabrics with membrane coating, water-repellent fabrics, functional clothing, and fleece fabrics. It can handle a maximum load of 1.5 kg. 12. Wool Finish: This program is designed for woollen fabrics that are suitable for machine-washing. It makes the fabrics fluffier but does not fully dry them. 13. Extra Short 40': This program is suitable for quickly drying laundry made of synthetic fibres, cotton, or blended fabrics. 14. Programme Time Warm/Cold: These programs allow you to set the drying time for specific fabrics, such as pre-dried, multi-layered, sensitive fabrics or freshening up items of laundry. Please note that the available programs and settings may vary depending on the specific model of the Siemens WT46W560FG dryer.
To adjust the drying options and settings on the Siemens WT46W560FG dryer, follow these steps: 1. Press the Option/Menu button to access the settings menu. 2. Use the Wijzigen/Modifier (Change) option to make changes to the settings. 3. Adjust the end of the program time by selecting a specific duration (e.g., 1-24 hours). 4. Set the buzzer volume to your preference by choosing from four volume settings (0 - off, 1 - quiet, 2 - normal, 3 - loud, 4 - very loud). 5. Activate or deactivate the appliance lock to prevent unintentional changes to the set functions. 6. Fine-tune the degree of dryness by selecting one of four stages (0 - low to 3 - very high) for different types of laundry (Whites/Coloureds, Easy-care, Mix, Extra Short 40). 7. Adjust the spin speed if you want a more precise indication of the projected drying duration based on the spin speed used in the washing machine. 8. Use the Programme Time Warm/Cold options to set the drying time for specific fabrics or freshening up laundry. 9. Press and hold the Option/Menu button for 5 seconds to protect against unintentional changes to the set functions. 10. Make sure to observe the safety instructions provided on page 13 of the manual. By following these steps, you can easily adjust the drying options and settings on the Siemens WT46W560FG dryer to suit your preferences and laundry needs.
To properly maintain and care for the Siemens WT46W560FG dryer, follow these instructions: 1. Installation: Ensure that the dryer is installed on a clean, level, and firm surface. Do not obstruct the air inlet on the front of the dryer and keep the area around the dryer clean. Level the dryer using the threaded feet and do not remove them under any circumstances. 2. Frost Protection: Before using the dryer, empty the condensation container and select any program to pump out the condensation. Wait for 5 minutes and then empty the condensation container again before turning the program selector to "Off." This helps prepare the dryer for frost protection. 3. Cleaning: Wipe the dryer housing, control panel, and air intake with a soft, damp cloth. Do not use harsh cleaning agents or solvents. Clean the filter in the condensation tank regularly under running water to prevent stubborn deposits. Clean the moisture sensors using a damp sponge with a rough surface. 4. Maintenance: The heat exchanger of the dryer is cleaned automatically during drying. Do not pull out the condensation container during the cleaning process. Ensure that the appliance plug is always accessible and connect the dryer to an AC earthed socket. By following these maintenance and care instructions, you can keep your Siemens WT46W560FG dryer in optimal condition for efficient and safe operation.
To ensure the safety of using the Siemens WT46W560FG dryer, please follow these steps: 1. Pay attention to the safety instructions provided in the manual (refer to page 13). 2. Avoid leaning or sitting on the dryer door to prevent the risk of tipping. 3. Secure loose cables to avoid tripping hazards during installation. 4. Do not operate the dryer in areas where there is a risk of frost. 5. Connect the dryer to an AC earthed socket according to the specifications to ensure complete safety. 6. Use an earth-leakage circuit breaker with the specified symbol. 7. Ensure compatibility between the appliance plug and socket. 8. Avoid using multiple plugs/connectors and extension cables. 9. Do not touch or hold the appliance plug with wet hands to prevent the risk of electric shock. 10. Never pull the appliance plug out of the socket by its cable. 11. Check the contents of the drum before switching on the dryer. 12. Do not use the dryer if the laundry has been in contact with solvents, oil, wax, grease, or paint, as it may pose a fire/explosion hazard. 13. Switch off the dryer once the program has ended. 14. Dispose of the dryer properly at an approved public disposal facility when necessary. By following these safety guidelines, you can ensure a safe and efficient use of the Siemens WT46W560FG dryer.
To install and operate the Siemens WT46W560FG dryer, follow these steps: Installation: 1. Check the dryer for any transport damage. 2. Ensure the dryer is installed on a clean, level, and firm surface. 3. Do not obstruct the air inlet on the front of the dryer. 4. Level the dryer using the threaded feet and a spirit level. 5. Connect the dryer to an AC earthed socket with the correct voltage and fuse protection. 6. Make sure the appliance plug is always accessible. 7. Follow the safety information provided in the manual, especially regarding frost protection. Operation: 1. Familiarize yourself with the different drying programs available. 2. Load the laundry into the drum, ensuring it is not overloaded. 3. Select the appropriate drying program for your laundry type. 4. Choose additional options and settings, such as temperature and drying level, if desired. 5. Start the drying process by pressing the Start/Stop button. 6. Monitor the progress of the drying cycle using the display panel. 7. Empty the condensation container and clean the filter regularly to maintain optimal performance. 8. After the drying cycle is complete, switch off the dryer and remove the laundry. By following these steps, you can successfully install and operate the Siemens WT46W560FG dryer.
The Siemens WT46W560FG dryer offers a variety of drying programs to suit different types of laundry. Here are the available drying programs: 1. Whites/coloureds: This program is suitable for drying whites and coloureds made of cotton or linen. You can choose between different drying levels, such as Iron dry, Cupboard dry, and Very dry. 2. Easy-care: Designed for non-iron laundry made of synthetic fibers and blended fabric, this program offers options like Iron dry and Cupboard dry. 3. Mix: This program is ideal for mixed items of laundry made of cotton and easy-care fabrics. It provides both Cupboard dry and Iron dry options. 4. Shirts/Blouses (Freshen up): Specifically for cotton or linen fabrics that are still damp and easy-care fabrics, this program reduces creasing in fabrics without completely drying them. 5. Microfibers (Outdoor): Intended for fabrics with membrane coating, water-repellent fabrics, functional clothing, and fleece fabrics, this program allows for separate drying of jackets and trousers with removable internal lining. 6. Woollen Finish: Suitable for woollen fabrics that are machine-washable, this program makes the fabrics fluffier but not completely dry. Remember to remove the fabrics once the program has ended and allow them to dry. 7. Extra Short 40': This program is designed for quick drying of laundry made of synthetic fibers, cotton, or blended fabrics. 8. Programme Time Warm/Cold: These programs allow for drying pre-dried, multi-layered, sensitive fabrics made of acrylic fibers, as well as freshening up or airing all types of fabrics. Please note that the available options may vary depending on the type of fabric, mixture of laundry, residual moisture, and loading capacity.
To select the appropriate drying option and setting for your laundry on the Siemens WT46W560FG dryer, follow these steps: 1. Familiarize yourself with the different drying programs available, as mentioned in the manual (refer to page 5). 2. Sort your laundry by fabric type and drying requirements. 3. Choose the drying program that best suits your laundry type. For example, select the Whites/coloureds program for cotton or linen fabrics, Easy-care program for synthetic fibers, or Woollen Finish program for woollen fabrics. 4. Depending on the selected program, you may have options to adjust the drying level. Use the available settings, such as Iron dry, Cupboard dry, or Very dry, to achieve the desired level of dryness. 5. If needed, select additional functions or settings, such as temperature or anti-creasing options, to further customize the drying process. 6. Load the laundry into the drum, ensuring not to overload it. 7. Start the drying process by pressing the Start/Stop button. 8. Monitor the progress of the drying cycle using the display panel. 9. Once the drying cycle is complete, remove the dry laundry from the drum. By following these steps, you can select the appropriate drying option and setting for your laundry on the Siemens WT46W560FG dryer.
To ensure the safety of using the Siemens WT46W560FG dryer, follow these steps: 1. Installation: - Secure loose cables to prevent tripping hazards. - Connect the dryer to an AC earthed socket according to specifications. - Use a sufficient cable cross-section and compatible appliance plug and socket. - Avoid using multiple plugs/connectors and extension cables. - Do not touch or hold the appliance plug with wet hands. - Never pull the appliance plug out of the socket by its cable. - Avoid damaging the mains lead. 2. Operation: - Load only laundry into the drum and check its contents before switching on the dryer. - Do not use the dryer if the laundry has been in contact with solvents, oil, wax, grease, or paint, as it can pose a fire/explosion hazard. - Avoid putting laundry containing foamed material/rubber in the dryer, as it may cause deformation. - Switch off the dryer once the program has ended. - Note that the water from condensation is not drinking water and may be contaminated with fluff. 3. Defects and Repairs: - Do not use the dryer if it is defective or suspected to be. - Repairs should only be carried out by the after-sales service. - Replace a faulty mains lead with the assistance of the after-sales service. - When changing the bulb of the interior light, ensure the appliance plug is pulled from the socket. 4. Spare parts and Disposal: - Use genuine spare parts and accessories for safety reasons. - Dispose of the dryer at an approved public disposal facility. - Properly dispose of the heat exchanger containing fluorinated greenhouse gas R-407C. - Keep all packaging out of reach of babies and children to prevent suffocation. By following these safety instructions, you can ensure the safe usage of the Siemens WT46W560FG dryer.
To properly install and operate the Siemens WT46W560FG dryer, follow these steps: 1. Installation: - Check the dryer for any transport damage. - Ensure the dryer is installed on a clean, level, and firm surface. - Do not obstruct the air inlet on the front of the dryer. - Connect the dryer to an AC earthed socket with the correct voltage and fuse protection. - Keep the area around the dryer clean and free from obstructions. - Level the dryer using the threaded feet and do not remove them. 2. Operation: - Load only laundry into the drum and check its contents before starting the dryer. - Select the desired drying program using the program selector. - Press the Start/Stop button to begin the drying cycle. - Empty the condensation container before and after each use. - Clean the heat exchanger, dryer housing, control panel, air intake, and filter regularly. - Use a damp sponge to clean the moisture sensors inside the drum. By following these steps, you can properly install and operate the Siemens WT46W560FG dryer.
The Siemens WT46W560FG dryer offers the following drying programs: 1. Whites/coloureds: This program is suitable for drying whites and coloured laundry made of cotton or linen. You can choose between different drying levels, such as Iron dry, Cupboard dry, and Very dry. 2. Easy-care: This program is designed for non-iron laundry made of synthetic fibers and blended fabric, including cotton. It offers options for Iron dry and Cupboard dry. 3. Mix: This program is ideal for mixed items of laundry made of cotton and easy-care fabrics. It provides both Cupboard dry and Iron dry options. 4. Shirts/Blouses (Freshen up): This program is suitable for cotton or linen fabrics that are still damp and easy-care fabrics. It helps reduce creasing in fabrics without completely drying them. 5. Outdoor: This program is specifically designed for fabrics with a membrane coating, water-repellent fabrics, functional clothing, and fleece fabrics. It allows for separate drying of jackets and trousers with removable internal lining. 6. Woollen Finish: This program is suitable for woollen fabrics that are machine-washable. It makes the fabrics fluffier but does not fully dry them. 7. Extra Short 40': This program is for quickly drying laundry made of synthetic fibers, cotton, or blended fabrics. 8. Programme Time Warm: This program is suitable for pre-dried, multi-layered, sensitive fabrics made of acrylic fibers or separate small items of laundry. 9. Programme Time Cold: This program is suitable for all types of fabrics and is used for freshening up or airing items of laundry that have been worn for a short period of time. Please note that the available drying programs may vary depending on the model and specific settings of the Siemens WT46W560FG dryer.
To select the appropriate drying option and setting for your laundry on the Siemens WT46W560FG dryer, follow these steps: 1. Sort your laundry: Separate your laundry by fabric type and drying requirements. This will help you choose the right program for each load. 2. Check the care labels: Refer to the care labels on your clothing items for specific drying instructions. Pay attention to any temperature or fabric restrictions. 3. Select the drying program: Use the program selector on the dryer to choose the appropriate drying program for your laundry. Options may include Whites/coloureds, Easy-care, Mix, Shirts/Blouses (Freshen up), Outdoor, Woollen Finish, Extra Short 40', Programme Time Warm, and Programme Time Cold. 4. Choose the desired drying level: Depending on the program selected, you may have the option to adjust the degree of dryness. Select the desired level, such as Iron dry, Cupboard dry, or Very dry. 5. Start the drying cycle: Press the Start/Stop button to begin the drying cycle. The dryer will automatically adjust the temperature and drying time based on the selected program. Remember to follow the safety instructions provided in the manual and avoid drying fabrics that are not suitable for the dryer. By following these steps, you can select the appropriate drying option and setting for your laundry on the Siemens WT46W560FG dryer.
Yes, the manual of the Siemens WT46W560FG is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0