Siemens WT46W491GB manual

Siemens WT46W491GB
5.5 · 1
PDF manual
 · 40 pages
English
manualSiemens WT46W491GB
Register
your
product
online

siemens-home.bsh-group.com/welcome

en ,QVWDOODWLRQDQGRSHUDWLQJLQVWUXFWLRQV

Tumble dryer

WT46W491GB

View the manual for the Siemens WT46W491GB here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Siemens WT46W491GB or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Siemens WT46W491GB is a freestanding dryer with dimensions of 842mm in height, 598mm in width, and 599mm in depth. With a spacious rated capacity of 9 kg, it offers ample room for drying clothes. Energy efficiency is a key feature of this appliance, as it is classified as A++ in terms of efficiency. This helps to save energy and reduce electricity costs. The dryer offers two drying programs, allowing users to choose the most suitable option for their needs. Additionally, it includes a delayed start timer, enabling users to set a specific time for the drying cycle to begin. Convenience is enhanced by the presence of a built-in display, providing easy access to program settings and other essential information. The interior of the drum is illuminated by a light, making it easier to load and unload clothes. The drum of the Siemens WT46W491GB is made from stainless steel, ensuring durability and long-lasting performance. With a power consumption of 0W when off and 0.75W in standby mode, this dryer is designed to save electricity even when not in use. In terms of refrigerating medium, it uses R134a. The cord length is 1.45m, providing flexibility in placing the dryer within a room or near a power outlet. In conclusion, the Siemens WT46W491GB is a high-capacity, energy-efficient dryer that offers a range of useful features such as multiple drying programs, a delayed start timer, and a drum interior light. Its stainless steel construction and low power consumption make it a reliable and durable choice for households.

General
BrandSiemens
ModelWT46W491GB | WT46W491GB
Productdryer
EAN4242003803288
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Height842 mm
Width598 mm
Depth599 mm
Weight50704 g
Design
Appliance placementFreestanding
Cord length1.45 m
Built-in displayYes
Drum materialStainless steel
Drum volume112 L
Display typeLED
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Control typeRotary, Touch
Door hingeRight
Performance
Drum capacity9 kg
Number of drying programs2
Refrigerating mediumR134a
Anti-Crease functionYes
Anti-Crease cycle120 min
Adjustable drying levelYes
Wool, Mix, Sport, Timed, Delicate/silk, Cloth
Cycle time226 min
Noise level65 dB
Drying classB
Power
Energy efficiency classA++
Power consumption (off)0 W
Power consumption (standby)0.75 W
Connected load1000 W
AC input frequency50 Hz
AC input voltage220 - 240 V
Energy consumption2.01 kWh
Heat source-
Annual energy consumption258 kWh
Current10 A
Ergonomics
Delayed start timerYes
Drum interior lightYes
Water tank full indicatorYes
Delay start (max)24 h
Child lockYes
BuzzerYes
Remaining time indicationYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT46W491GB below.

What is a condenser dryer?

A condenser dryer is a dryer in which condensation ends up in a reservoir.

What is a drain dryer?

A drain dryer is a dryer in which the warm air and condensation are drained through a hose.

What is the best thing to do about a smelly dryer?

It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.

There is a burning smell from my dryer, now what?

Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.

What is the weight of the Siemens WT46W491GB?

The Siemens WT46W491GB has a weight of 50704 g.

What is the height of the Siemens WT46W491GB?

The Siemens WT46W491GB has a height of 842 mm.

What is the width of the Siemens WT46W491GB?

The Siemens WT46W491GB has a width of 598 mm.

What is the depth of the Siemens WT46W491GB?

The Siemens WT46W491GB has a depth of 599 mm.

What energy label does the Siemens WT46W491GB have?

The Siemens WT46W491GB has energy label A++.

Does Siemens WT46W491GB have a freestanding appliance placement?

Yes, Siemens WT46W491GB has a freestanding appliance placement. This means that it can be placed anywhere in the room without the need for installation.

What is the rated capacity of Siemens WT46W491GB?

The rated capacity of Siemens WT46W491GB is 9 kg. This means it can dry up to 9 kilograms of laundry in one cycle, making it suitable for larger households.

How many drying programs does Siemens WT46W491GB have?

Siemens WT46W491GB has 2 drying programs. This means that it offers limited flexibility in terms of drying options compared to products with more drying programs.

Does Siemens WT46W491GB have a delayed start timer?

Yes, Siemens WT46W491GB has a delayed start timer. This feature allows the user to set a specific time for the dryer to start in order to optimize energy consumption or to have the laundry ready at a specific time.

Does Siemens WT46W491GB have a drum interior light?

Yes, Siemens WT46W491GB has a drum interior light. This makes it easier for the user to see inside the drum and check if there are any items left behind before starting a new drying cycle.

How do I troubleshoot if the Siemens WT46W491GB dryer does not start when I close the door?

If the Siemens WT46W491GB dryer does not start when you close the door, you can try the following troubleshooting steps: 1. Check the fluff filter: A dirty fluff filter can cause longer drying times and prevent the dryer from starting. Clean the fluff filter by removing any lint or debris. 2. Ensure proper air circulation: Make sure that the air inlet on the dryer is not blocked and remains unobstructed. Blocked air inlet can increase drying time and prevent the dryer from starting. Also, ensure that there is sufficient air circulation in the room by ventilating it. 3. Check the ambient temperature: The optimum ambient temperature for drying is between 15 °C and 30 °C. If the temperature is outside this range, it may affect the drying time and prevent the dryer from starting. 4. Check for energy-saving mode: If the display panel goes off and the Start button flashes, it indicates that the energy-saving mode is active. This is not a fault but a feature of the dryer. Press the Start button to activate the dryer. If the issue persists after performing these troubleshooting steps, it is recommended to contact the after-sales service for further assistance.

What should I do if the Siemens WT46W491GB dryer displays a safety warning message?

If the Siemens WT46W491GB dryer displays a safety warning message, you can follow these steps to address the issue: 1. Check for any specific instructions: Read the safety warning message carefully and look for any specific instructions or actions mentioned. 2. Ensure proper installation: Make sure that the dryer is properly installed according to the installation instructions provided in the manual. Check the mains voltage, power socket, and grounding to ensure they meet the specified requirements. 3. Inspect the mains cable: Check the mains cable for any damage or alterations. If the cable is kinked, crushed, or altered, it may result in electric shock, short circuiting, or fire. If any issues are found, do not use the dryer and contact a qualified technician for assistance. 4. Verify proper routing of hoses and cables: Ensure that the hoses and mains cables are correctly routed and do not pose a tripping hazard. Make sure they are secured and do not obstruct the dryer's operation. 5. Clean the fluff filter regularly: A clogged or dirty fluff filter can pose a fire hazard. Clean the fluff filter regularly as instructed in the manual to prevent any potential issues. If the safety warning message persists or if you have any concerns, it is recommended to contact the after-sales service or a qualified technician for further assistance.

Why is the Siemens WT46W491GB dryer not drying the laundry properly?

If the Siemens WT46W491GB dryer is not drying the laundry properly, you can try the following steps to troubleshoot the issue: 1. Check the laundry load: Ensure that you are not overloading the dryer. Overloading can prevent proper airflow and hinder the drying process. Remove some items if necessary to allow for better circulation. 2. Clean the fluff filter: A clogged or dirty fluff filter can restrict airflow and affect drying performance. Clean the fluff filter by removing any lint or debris. Refer to page 32 of the manual for instructions on cleaning the moisture sensor. 3. Sort the laundry: Separate the laundry according to fabric type and drying program. Different fabrics require different drying times and temperatures. By sorting the laundry, you can ensure that each item receives the appropriate drying conditions. 4. Select the correct drying program: Make sure you are using the appropriate drying program for the type of laundry you are drying. Refer to the manual for guidance on selecting the correct program for different fabric types. 5. Check the ambient temperature: The ambient temperature can affect the drying performance. Ensure that the room temperature is within the recommended range of 15°C to 30°C for optimal drying results. If the issue persists after following these steps, it is recommended to contact the after-sales service for further assistance.

How can I troubleshoot if the Siemens WT46W491GB dryer is not allowing me to select a drying program?

If the Siemens WT46W491GB dryer is not allowing you to select a drying program, you can try the following troubleshooting steps: 1. Check the control panel: Ensure that the dryer is powered on and the control panel is responsive. Make sure there are no error messages or indicators displayed on the control panel. 2. Verify the program selector: Use the program selector to switch the dryer on and off and to select the desired drying program. Ensure that the program selector is functioning properly and not stuck. 3. Check the display panel: Familiarize yourself with the buttons and options available on the display panel. Select the desired degree of dryness, drying time, and other settings as needed. 4. Ensure proper button selection: Make sure you are selecting the correct buttons for the desired drying program. Refer to the manual for a detailed description of all buttons and their functions. 5. Reset the dryer: If the issue persists, try resetting the dryer by turning it off, unplugging it from the power source, waiting for a few minutes, and then plugging it back in. This can sometimes resolve minor technical glitches. If the problem continues after following these steps, it is recommended to contact the after-sales service or a qualified technician for further assistance.

What should I do if the Siemens WT46W491GB dryer is not unloading the laundry properly or if the condensate container and fluff filter are not clean?

If the Siemens WT46W491GB dryer is not unloading the laundry properly or if the condensate container and fluff filter are not clean, you can follow these steps: 1. Emptying the condensate container: - Pull out the condensate container horizontally. - Pour out the condensation water from the container. - Push in the condensate container until you feel it lock back into place in the dryer. 2. Cleaning the filter in the condensate container: - Remove the filter from the condensate container. - Clean the filter under warm, running water or in the dishwasher. - Push in the filter until you feel it lock into place in the condensate container. It is important to note that the filter in the condensate container cleans the condensation water used during the dryer's automatic cleaning cycle. Operating the dryer without the filter inserted may cause damage. Regularly check the filter for remaining deposits and remove them. By following these steps, you can ensure that the condensate container is emptied and the filter is clean, allowing the dryer to function properly.

Is the manual of the Siemens WT46W491GB available in English?

Yes, the manual of the Siemens WT46W491GB is available in English .

Is your question not listed? Ask your question here

No results