View the manual for the Siemens WT46E375EX here, for free. This manual comes under the category dryers and has been rated by 3 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Siemens WT46E375EX or do you need help? Ask your question here



| Brand | Siemens |
| Model | WT46E375EX | WT46E375EX |
| Product | dryer |
| EAN | 4242003539378 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Cord length | 1.45 m |
| Loading type | Front-load |
| Door hinge | Right |
| Product color | White |
| Display type | LCD |
| Certification | CE, VDE |
| Maximum spin speed | 1400 RPM |
| Cycle time | 120 min |
| Noise level | 64 dB |
| Drum capacity | 7 kg |
| Delay start (max) | 24 h |
| Delayed start timer | Yes |
| Drum interior light | Yes |
| Energy consumption | 4.5 kWh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Connected load | 2800 W |
| Energy efficiency class | B |
| Current | 16 A |
| Width | 598 mm |
| Depth | 625 mm |
| Height | 842 mm |
| Weight | 43000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WT46E375EX below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WT46E375EX has a weight of 43000 g.
The Siemens WT46E375EX has the following certifications: CE, VDE.
The Siemens WT46E375EX has a height of 842 mm.
The Siemens WT46E375EX has a width of 598 mm.
The Siemens WT46E375EX has a depth of 625 mm.
The Siemens WT46E375EX has energy label B.
Yes, Siemens WT46E375EX is a freestanding dryer, which means it does not need to be installed or built into a specific location.
The maximum spin speed of Siemens WT46E375EX is 1400 RPM. This high spin speed allows for efficient drying and helps to reduce the moisture content in the laundry.
Yes, Siemens WT46E375EX has a delayed start timer, which means the user can set the dryer to start at a later time within a maximum delay of 24 hours. This feature offers convenience and flexibility in choosing when the drying cycle should begin.
Siemens WT46E375EX has an energy consumption of 4.5 kWh. This energy efficiency rating is relatively low, meaning that it consumes less electricity compared to other dryer models, resulting in lower electricity bills for the user.
Yes, Siemens WT46E375EX is equipped with a drum interior light. This feature allows for better visibility inside the drum, making it easier to load and unload laundry, especially in dimly lit areas.
To adjust the drying time and temperature settings on the Siemens WT46E375EX dryer, follow these steps: 1. Turn on the dryer by pressing the power button. 2. Select the desired drying program by turning the program selector knob. Each program has a predefined drying time and temperature setting. 3. If you want to customize the drying time, use the time selector knob to increase or decrease the duration. The available options may vary depending on the selected program. 4. To adjust the temperature setting, locate the temperature control button or knob. Turn it to the desired temperature level, such as low, medium, or high. Refer to the program guide for recommended temperature settings for different types of fabrics. 5. Once you have set the desired drying time and temperature, press the start button to begin the drying cycle. Remember to always follow the manufacturer's guidelines and fabric care labels when selecting the appropriate drying program and temperature setting for your laundry.
If the Siemens WT46E375EX dryer is not heating up properly, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the dryer is properly plugged into a functioning power outlet. Check the circuit breaker or fuse box to make sure there is power to the outlet. 2. Clean the lint filter: A clogged lint filter can restrict airflow and cause the dryer to overheat. Remove the lint filter and clean it thoroughly. Make sure to remove any lint or debris that may have accumulated. 3. Check the venting system: Inspect the venting system for any blockages or restrictions. Clear any lint buildup or obstructions in the vent hose or exhaust duct. 4. Verify the selected drying program: Ensure that you have selected the appropriate drying program for your laundry. Some programs may have lower heat settings or shorter drying times, which could affect the heating performance. 5. Contact customer support: If the issue persists after performing the above steps, it is recommended to contact Siemens customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect the dryer. Remember to always prioritize safety and follow the manufacturer's guidelines when troubleshooting or performing any maintenance on the dryer.
To ensure optimal performance of the Siemens WT46E375EX dryer, it is recommended to clean the lint filter after every use. Cleaning the lint filter regularly helps to maintain proper airflow and prevent lint buildup, which can affect the drying efficiency and potentially pose a fire hazard. To clean the lint filter, follow these steps: 1. Locate the lint filter, which is usually located inside the dryer door or on the top panel. 2. Open the lint filter compartment by pulling it out or lifting the cover. 3. Remove any visible lint from the filter by hand or using a soft brush or vacuum cleaner attachment. 4. Rinse the lint filter under running water to remove any remaining lint or debris. Make sure to remove all traces of lint and allow the filter to dry completely before reinstalling it. 5. Once the lint filter is dry, place it back into the lint filter compartment and ensure it is securely in place. Regularly cleaning the lint filter will help maintain the performance and efficiency of your Siemens WT46E375EX dryer.
If the Siemens WT46E375EX dryer is making unusual noises during operation, you can follow these steps to troubleshoot the issue: 1. Check for loose objects: Ensure that there are no loose items, such as buttons, coins, or small objects, inside the drum or around the dryer. These objects can cause rattling or banging noises during operation. 2. Verify the load balance: Unevenly distributed laundry can cause the dryer to vibrate excessively and produce noise. Stop the dryer and rearrange the load to ensure it is evenly distributed. 3. Inspect the drum: Examine the drum for any signs of damage, such as dents or cracks. A damaged drum can create scraping or thumping noises. If you notice any damage, contact Siemens customer support for further assistance. 4. Clean the lint filter and exhaust vent: A clogged lint filter or exhaust vent can restrict airflow and cause the dryer to make unusual noises. Clean the lint filter and check the exhaust vent for any blockages. Remove any lint or debris that may have accumulated. 5. Contact customer support: If the unusual noises persist after performing the above steps, it is recommended to contact Siemens customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect the dryer. Remember to always prioritize safety and follow the manufacturer's guidelines when troubleshooting or performing any maintenance on the dryer.
When using the Siemens WT46E375EX dryer, it is important to follow these safety precautions: 1. Read the user manual: Familiarize yourself with the operating instructions and safety guidelines provided in the user manual before using the dryer. 2. Proper installation: Ensure that the dryer is installed and grounded correctly according to the manufacturer's instructions. Use a qualified technician if necessary. 3. Ventilation: Maintain proper ventilation by ensuring that the dryer's exhaust vent is clean and free from obstructions. This helps prevent overheating and reduces the risk of fire. 4. Load capacity: Do not overload the dryer beyond its recommended capacity. Overloading can affect drying performance and potentially damage the dryer. 5. Fire safety: Never leave the dryer unattended while it is in operation. Avoid drying items that have been soiled with flammable substances, such as oil or gasoline. 6. Lint filter: Clean the lint filter after every use to prevent lint buildup, which can reduce drying efficiency and pose a fire hazard. 7. Child safety: Keep the dryer door closed and ensure that children do not play with or around the appliance. 8. Maintenance: Regularly inspect the dryer for any signs of damage or wear. If you notice any issues, contact Siemens customer support for assistance. By following these safety precautions, you can ensure safe and efficient use of the Siemens WT46E375EX dryer.
To adjust the drying time for different types of fabrics on the Siemens WT46E375EX dryer, follow these steps: 1. Start by loading the dryer with the clothes you want to dry. Make sure to separate different types of fabrics to ensure optimal drying results. 2. Turn on the dryer by pressing the power button. 3. Select the appropriate drying program for the fabric type. The dryer may have preset programs for common fabric types such as cotton, synthetic, delicate, or wool. Refer to the control panel or user interface for the available options. 4. If the dryer allows manual adjustment of drying time, use the time adjustment buttons or dial to increase or decrease the drying time as needed. Refer to the user manual or control panel for specific instructions on how to adjust the drying time. 5. Once you have set the desired drying time, press the start button to begin the drying cycle. 6. Monitor the drying process and check the clothes periodically to ensure they are drying properly. If necessary, you can adjust the drying time further during the cycle. Remember to always follow the care instructions on the garment labels to prevent damage to the fabrics.
If your Siemens WT46E375EX dryer is not heating up properly, there are a few possible reasons and troubleshooting steps you can take: 1. Check the power supply: Ensure that the dryer is properly plugged into a functioning power outlet. Check the circuit breaker or fuse box to make sure there are no tripped breakers or blown fuses. 2. Clean the lint filter: A clogged lint filter can restrict airflow and cause the dryer to overheat. Remove the lint filter and clean it thoroughly. Make sure to remove any lint or debris that may have accumulated. 3. Examine the venting system: Check the dryer's venting system for any blockages or restrictions. Clear any lint buildup or obstructions in the vent hose or exhaust vent. A blocked vent can prevent proper airflow and cause the dryer to overheat. 4. Check the heating element: The heating element is responsible for generating heat in the dryer. If it is faulty or damaged, the dryer may not heat up properly. Consult the user manual or contact a professional technician to inspect and replace the heating element if necessary. 5. Select the correct drying program: Ensure that you are using the appropriate drying program for the type of fabric you are drying. Different fabrics require different drying temperatures and times. Refer to the user manual for guidance on selecting the correct program. By following these troubleshooting steps, you should be able to identify and resolve the issue of your Siemens WT46E375EX dryer not heating up properly.
To ensure optimal performance of your Siemens WT46E375EX dryer, it is recommended to clean the lint filter after every use. Here are the steps to clean the lint filter: 1. Locate the lint filter, which is usually located inside the dryer drum or on the top panel of the dryer. 2. Open the lint filter compartment by pulling it out or lifting the cover. 3. Remove any visible lint or debris from the filter by hand. You can also use a soft brush or vacuum cleaner attachment to gently remove lint from the filter. 4. Check the filter for any damage or clogs. If the filter is damaged, replace it with a new one. 5. Once the lint filter is clean, place it back into the filter compartment and ensure it is securely in place. Regularly cleaning the lint filter helps to maintain proper airflow and prevents lint buildup, which can reduce drying efficiency and pose a fire hazard. By following these steps, you can keep your Siemens WT46E375EX dryer running smoothly and efficiently.
There can be several reasons why your Siemens WT46E375EX dryer is making loud noises during operation. Here are some possible causes and troubleshooting steps: 1. Check for loose objects: Ensure that there are no loose items, such as buttons, coins, or small objects, inside the dryer drum. These objects can cause noise when the drum rotates. 2. Inspect the drum belt: The dryer's drum belt may become worn or damaged over time, resulting in noise during operation. Check the belt for any signs of wear, fraying, or damage. If necessary, replace the belt following the manufacturer's instructions. 3. Examine the drum rollers: The drum rollers support the drum's rotation and can become worn or damaged. Inspect the rollers for any signs of wear or damage. If needed, replace the rollers according to the manufacturer's guidelines. 4. Lubricate moving parts: Apply a small amount of lubricant, such as silicone-based lubricant, to the dryer's moving parts, including the motor shaft and idler pulley. This can help reduce friction and noise. 5. Level the dryer: Ensure that the dryer is level and stable. Use a level tool to check the dryer's balance and adjust the leveling feet if necessary. If the noise persists after performing these troubleshooting steps, it is recommended to contact a professional technician or the manufacturer's customer support for further assistance.
If your Siemens WT46E375EX dryer is not starting or turning on, you can try the following troubleshooting steps: 1. Check the power supply: Ensure that the dryer is properly plugged into a functioning power outlet. Check the circuit breaker or fuse box to make sure there are no tripped breakers or blown fuses. 2. Verify the door is closed properly: Make sure that the dryer door is fully closed and latched. The dryer will not start if the door is not securely closed. 3. Check the control settings: Ensure that the control settings are properly selected. Make sure the dryer is set to the desired drying program and any additional settings, such as temperature or drying time, are correctly adjusted. 4. Reset the dryer: If the dryer is unresponsive, try resetting it by unplugging it from the power outlet for a few minutes, then plugging it back in. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Siemens customer support or a professional technician for further assistance. By following these troubleshooting steps, you can address the issue of your Siemens WT46E375EX dryer not starting or turning on.
Yes, the manual of the Siemens WT46E375EX is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0