View the manual for the Siemens WQ33G2D1NL here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Siemens WQ33G2D1NL or do you need help? Ask your question here




| Brand | Siemens |
| Model | WQ33G2D1NL | WQ33G2D1NL |
| Product | dryer |
| EAN | 4242003907443 |
| Language | English |
| Filetype | User manual (PDF) |
| Loading type | Front-load |
| Appliance placement | Freestanding |
| Drying system | Condensation |
| Product color | White |
| Door color | Gray |
| Reversible doors | - |
| Control type | Rotary, Touch |
| Drum volume | 112 L |
| Built-in display | Yes |
| Display type | LED |
| Drum material | Stainless steel |
| Drum type | SoftDry |
| Cord length | 1.45 m |
| Door hinge | Right |
| Certification | CE, VDE |
| Lower built-in capability (topless) | Yes |
| Delayed start timer | Yes |
| Delay start (max) | 24 h |
| Remaining time indication | Yes |
| Buzzer | Yes |
| Child lock | Yes |
| Self-cleaning | - |
| Wi-Fi controlled | No |
| Near Field Communication (NFC) | No |
| Drum capacity | 8 kg |
| Drying class | A |
| Cycle time | 165 min |
| Noise level | 64 dB |
| Anti-Crease function | Yes |
| Anti-Crease cycle | 60 min |
| Blouse/shirt, Cotton, Cupboard dry, Cupboard dry+, Eco, Iron dry, Lingerie, Mix, Outdoor/sport, Pillow, Towel, Warm-up, Wool | |
| Half-load | Yes |
| Refrigerating medium | R290 |
| Refrigerating medium weight | 135 g |
| Ambient temperature (min) | 5 °C |
| Ambient temperature (max) | 35 °C |
| Energy efficiency class | A+++ |
| Energy efficiency scale | A+++ to D |
| Connected load | 600 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Annual energy consumption | 176 kWh |
| Heat source | Electric |
| Energy consumption | 1.4 kWh |
| Power consumption (standby) | 0.5 W |
| Power consumption (off) | 0.15 W |
| Current | 10 A |
| Width | 598 mm |
| Depth | 613 mm |
| Height | 842 mm |
| Weight | 53500 g |
| Depth with door open | 1096 mm |
| Depth with door closed | 648 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens WQ33G2D1NL below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Siemens WQ33G2D1NL has a weight of 53500 g.
The Siemens WQ33G2D1NL has the following certifications: CE, VDE.
The Siemens WQ33G2D1NL has a height of 842 mm.
The Siemens WQ33G2D1NL has a width of 598 mm.
The Siemens WQ33G2D1NL has a depth of 613 mm.
The Siemens WQ33G2D1NL has energy label A+++.
Yes, the Siemens WQ33G2D1NL is a freestanding dryer. This means that it can be placed anywhere in the home without the need for it to be integrated into cabinetry or a laundry room.
The drum volume of the Siemens WQ33G2D1NL is 112 L. This large drum size allows for efficient drying of larger batches of laundry, reducing the need for multiple drying cycles.
Yes, the Siemens WQ33G2D1NL has a built-in LED display. This display provides clear and easy-to-read information about the dryer's settings and cycle progress, enhancing user convenience.
Yes, the Siemens WQ33G2D1NL has an anti-crease function. This feature helps to reduce wrinkles in the laundry, saving users time and effort in ironing or steaming their clothes.
The noise level of the Siemens WQ33G2D1NL is 64 dB. This is relatively low, ensuring that the dryer operates quietly and minimizes disturbance in the surrounding environment.
To properly set up and connect the Siemens WQ33G2D1NL dryer, follow these steps: 1. Drainage: Make sure the water feed hose is properly connected to a drain. Check for any cracks or leaks in the hose and secure it in place. 2. Leveling: To reduce noises and vibrations, ensure that the dryer is level. Adjust the appliance feet by turning them until the device is stable. Use a spirit level to check the horizontal adjustment. 3. Electrical Connection: Insert the mains plug of the device's mains cable into a nearby socket. Refer to the technical data on page 48 of the manual for the specific connection requirements. 4. Installation Site: Place the dryer on a clean and fixed surface. Ensure that there is enough space around the device for proper ventilation. Avoid placing the dryer in frost-sensitive areas or outdoors. 5. Washer-Dryer Column: If you are setting up the dryer as part of a washer-dryer column, follow the instructions provided in the accompanying documents. Make sure the dimensions of the dryer match those of the washing machine. Remember to refer to the manual for any additional information or specific details related to the setup and connection of the Siemens WQ33G2D1NL dryer.
If the program duration is extended and energy consumption increases when using the Siemens WQ33G2D1NL dryer, follow these steps to troubleshoot the issue: 1. Check the load quantity: Ensure that you are not exceeding the maximum load quantity recommended for the program you are using. Exceeding the maximum load can extend the program duration and increase energy consumption. Refer to the program's specifications in the manual for the correct load quantity. 2. Clean the fluff filter: A contaminated fluff filter can reduce airflow in the dryer, leading to extended program duration and increased energy consumption. Clean the fluff filter after each drying cycle. Refer to page 31 of the manual for instructions on how to clean the fluff filter properly. 3. Check for obstructions: Make sure there are no objects or items in the drum that are not intended for use with the dryer. These objects can interfere with the drying process and cause the program duration to extend. Remove any foreign objects from the drum before starting the drying cycle. By following these steps, you can troubleshoot and address the issue of extended program duration and increased energy consumption when using the Siemens WQ33G2D1NL dryer.
To clean the fluff filter of the Siemens WQ33G2D1NL dryer, follow these steps: 1. Remove the two-piece fluff filter from the dryer. 2. Open both fluff filters to access the fluff. 3. Remove the fluff from the recess of the filters. 4. Thoroughly clean both fluff filters with running warm water and ensure they are completely dry. Be careful not to let any fluff fall into the air duct. 5. Detach the two-piece fluff filter for easier cleaning. 6. Close the two fluff filters and plug them together. 7. Cleaning the fluff filter is not required after every drying cycle, but it is recommended to do so regularly. 8. Install the two-piece fluff filter back into the dryer, ensuring that the filter mat is not deformed or damaged. 9. Close the door of the dryer. 10. Additionally, you can clean the heat exchanger cover with a soft brush to maintain its efficiency. 11. The bottom unit of the dryer also has a filter system that collects fluff from the laundry. If prompted on the display, clean the filter system of the bottom unit and ensure all contaminants are removed from the seal. By following these steps, you can effectively clean the fluff filter of the Siemens WQ33G2D1NL dryer and maintain its performance.
To properly dispose of the packaging material of the Siemens WQ33G2D1NL dryer, follow these steps: 1. Remove all packaging material: Carefully remove all packaging material from the dryer, including any plastic covers, tapes, and foam inserts. Ensure that no packaging material is left inside the dryer. 2. Separate recyclable materials: Separate the recyclable packaging materials, such as cardboard boxes and paper inserts, from non-recyclable materials like plastic films and Styrofoam. Check with your local recycling guidelines to determine the appropriate recycling methods for each material. 3. Dispose of non-recyclable materials: Place the non-recyclable packaging materials in the appropriate waste bin or dispose of them according to your local waste disposal regulations. Avoid burning or incinerating the packaging materials. 4. Recycle recyclable materials: Take the recyclable packaging materials to a recycling center or place them in the designated recycling bins in your area. Follow the recycling guidelines provided by your local recycling facility. By following these steps, you can properly dispose of the packaging material of the Siemens WQ33G2D1NL dryer, ensuring that recyclable materials are recycled and non-recyclable materials are disposed of responsibly.
To exit the energy-saving mode of the Siemens WQ33G2D1NL dryer, follow these steps: 1. Press any button on the dryer. This action will activate the display, which may be off while in energy-saving mode. By following this step, the energy-saving mode will be exited, and the dryer will be ready for operation. Please note that the specific instructions for exiting the energy-saving mode may vary depending on the model and firmware version of the Siemens WQ33G2D1NL dryer. If you encounter any difficulties or if the energy-saving mode persists, refer to the troubleshooting section of the manual or contact Siemens customer service for further assistance.
Yes, the manual of the Siemens WQ33G2D1NL is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0