View the manual for the Siemens SX636X00CE here, for free. This manual comes under the category dishwashers and has been rated by 2 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Siemens SX636X00CE or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Siemens SX636X00CE.
| Brand | Siemens |
| Model | SX636X00CE | SX636X00CE |
| Product | dishwasher |
| EAN | 4242003790175 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Fully built-in |
| Cutlery compartment type | Basket |
| Upper basket adjustable height | Yes |
| Baskets adjustable placement | Upper |
| Tub material | Stainless steel |
| Water fill | Cold, Hot |
| Outlet hose length | 1.9 m |
| Inlet hose length | 1.65 m |
| Cord length | 1.75 m |
| Product size | Full size (60 cm) |
| Door color | Not applicable |
| Control panel color | Stainless steel |
| Control type | Buttons |
| Built-in display | Yes |
| Built-in water softener | Yes |
| A++ | |
| Energy consumption per cycle | 0.92 kWh |
| Power consumption (off) | 0.1 W |
| Water consumption per cycle | 9.5 L |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Current | 10 A |
| Connected load | 2400 W |
| Annual energy consumption | 262 kWh |
| Annual water consumption | 2660 L |
| Drying class | A |
| Washing class | A |
| Noise level | 46 dB |
| Number of place settings | 13 place settings |
| Cycle time | 210 min |
| Number of washing programs | 6 |
| Dishwashing programs | 60min 65°C, Auto 45-65°C, Eco 50°C, Glass/delicate, Intensive, Silent |
| Temperature (max) | 70 °C |
| Extra dry | Yes |
| AquaSensor function | Yes |
| Load sensor | Yes |
| AquaStop function | Yes |
| Delay start (max) | 24 h |
| Delayed start timer | Yes |
| Number of temperature settings | 5 |
| Drying system | Heat exchanger |
| Overflow protection | Yes |
| Glass protection | Yes |
| Automatic detergent detection | Yes |
| Floor indicator light | Yes |
| Dosage assistant | Yes |
| Child lock | Yes |
| Remaining time indication | Yes |
| Height | 865 mm |
| Width | 598 mm |
| Depth | 550 mm |
| Weight | 35881 g |
| Package weight | 38000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens SX636X00CE below.
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
The Siemens SX636X00CE has a weight of 35881 g.
The Siemens SX636X00CE has a height of 865 mm.
The Siemens SX636X00CE has a width of 598 mm.
The Siemens SX636X00CE has a depth of 550 mm.
The energy efficiency class of the Siemens SX636X00CE dishwasher is A++.
The Siemens SX636X00CE dishwasher can accommodate 13 place settings.
Yes, the Siemens SX636X00CE dishwasher has an Extra Dry function.
The noise level of the Siemens SX636X00CE dishwasher is 46 dB.
The Siemens SX636X00CE dishwasher has 6 washing programs.
To operate the Siemens SX636X00CE dishwasher, follow these steps: 1. Check the appliance on delivery: Inspect the dishwasher for any visible damage or missing parts. If you have any complaints, contact the dealer or customer services. 2. Installation: Install the dishwasher according to the installation instructions provided. Ensure that the dishwasher is correctly connected to the necessary utilities, including drainage, drinking water, and electrical connections. 3. Loading the dishwasher: Place the dirty dishes, cutlery, and other items in the appropriate racks and compartments of the dishwasher. Make sure not to overload the dishwasher and follow the loading guidelines mentioned in the manual. 4. Selecting a program: Use the control panel to select the desired program for your cleaning needs. The available program options will be listed in the manual. Choose the appropriate program based on the type and level of soiling on your dishes. 5. Starting the dishwasher: Close the dishwasher door securely and press the start button. The dishwasher will begin the selected program and automatically adjust the water temperature, duration, and other settings as needed. 6. Monitoring the progress: During the operation, you can monitor the progress of the dishwasher through the display panel. Some models may also have indicators for the remaining time or other relevant information. 7. Unloading the dishwasher: Once the program is complete, wait for a few minutes to allow the dishes to cool down. Then, carefully unload the clean and dry dishes from the dishwasher. Remember to consult the manual for any specific instructions or troubleshooting tips related to your Siemens SX636X00CE dishwasher.
The available program settings for the Siemens SX636X00CE dishwasher are as follows: 1. Water hardness: This setting allows you to adjust the water hardness level. It is recommended to select the lowest setting when using Multitabs. 2. Rinse aid: You can adjust the amount of rinse aid used, which affects the drying performance. When using Multitabs, select setting 0. 3. ExtraDry: This setting improves the drying performance for glasses and plastic tableware. 4. Hot water: The dishwasher can be connected to either hot water (40-60°C) or cold water (<40°C), depending on your preference. 5. Auto Power Off: The appliance automatically switches off at the end of each wash. 6. Tone volume: You can adjust the volume of the signal at the end of the program. 7. Timelight: While a program is running, status information is projected onto the floor. 8. infoLight: A light is projected to signal an active cleaning cycle. Do not open the dishwasher door until the light spot is no longer visible on the floor. Please note that these program settings may vary depending on the specific configuration of your Siemens SX636X00CE dishwasher.
The AquaSensor feature in the Siemens SX636X00CE dishwasher works as follows: 1. The AquaSensor is an optical measuring device (light barrier) located inside the dishwasher. 2. It measures the turbidity (cloudiness) of the rinsing water during the wash cycle. 3. The AquaSensor is activated according to the selected program. If it is active, "clean" rinsing water can be transferred to the next rinse bath, reducing water consumption by 3-6 liters. 4. If the turbidity level is high, indicating dirty water, the AquaSensor drains the water and replaces it with fresh water. 5. In automatic programs, the temperature and running time can also be adjusted based on the degree of soiling detected by the AquaSensor. The AquaSensor ensures efficient cleaning by continuously monitoring the cleanliness of the water and adjusting the dishwasher's operation accordingly. It helps to optimize water usage and improve the overall cleaning performance of the Siemens SX636X00CE dishwasher.
To switch on the Siemens SX636X00CE dishwasher, follow these steps: 1. Ensure that the dishwasher is properly connected to the power supply and the water source. 2. Open the dishwasher door by pulling the handle towards you. 3. Check that the dishwasher is empty and that there are no obstructions in the spray arms or filters. 4. Close the dishwasher door securely until you hear a click. 5. Locate the power button on the control panel. It is usually labeled with a symbol resembling a circle or a power symbol. 6. Press and hold the power button for a few seconds until the dishwasher powers on. You may see lights or indicators on the control panel to indicate that the dishwasher is now switched on. 7. Once the dishwasher is switched on, you can proceed to select a program and start the cleaning cycle. Remember to consult the manual for any specific instructions or troubleshooting tips related to your Siemens SX636X00CE dishwasher.
To view the remaining running time on the Siemens SX636X00CE dishwasher, follow these steps: 1. When you have selected a program, the remaining program time will be indicated in the display window. 2. After the program has started, the remaining running time will also be displayed on the floor, but this feature is only available for settings Timelight †:‹‚ and †:‹ƒ. 3. The running time is determined during the program based on factors such as water temperature, the quantity of dishes, and the degree of soiling. Therefore, the actual running time may vary depending on the selected program. 4. If you have set a time preselection, you can delay the start of the program by up to 24 hours. The remaining running time will be adjusted accordingly. 5. Once the program is complete, the value ‹:‹‹ will appear in the display window to indicate the end of the program. If you have set a signal volume, a buzzer will also sound to notify you. Please note that the availability of certain features, such as the floor display, may depend on the specific configuration of your Siemens SX636X00CE dishwasher.
Yes, the manual of the Siemens SX636X00CE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0