View the manual for the Siemens iQ500 LC77BHP50 here, for free. This manual comes under the category exhaust hoods and has been rated by 3 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the Siemens iQ500 LC77BHP50 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Siemens iQ500 LC77BHP50.

| Brand | Siemens |
| Model | iQ500 LC77BHP50 | LC77BHP50 |
| Product | exhaust hood |
| EAN | 4242003831984 |
| Language | English |
| Filetype | Installation Guide (PDF), Energy label (PDF) |
| Maximum extraction power | 674 m³/h |
| Type of extraction | Ducted/Recirculating |
| Fluid dynamic efficiency class | A |
| Lighting efficiency class | A |
| Grease filtering efficiency class | B |
| Noise level | 60 dB |
| Intensive speed | Yes |
| Number of speeds | 3 |
| Noise level (low speed) | 47 dB |
| Pressure (Pa) | 304 |
| Minimum distance from electric hob | 550 mm |
| Minimum distance from gas hob | 650 mm |
| Maximum recirculating power | 325 m³/h |
| Energy efficiency class | A |
| Annual energy consumption | 36 kWh |
| Connected load | 143 W |
| AC input frequency | 50 - 60 Hz |
| Motor power | 140 W |
| AC input voltage | 220 - 240 V |
| Current | 10 A |
| Bulb type | LED |
| Dimmable lighting | Yes |
| Illuminance | 267 lx |
| Number of bulbs | 2 bulb(s) |
| Bulb power | 1.5 W |
| Built-in display | Yes |
| Control type | Touch |
| Check valve | Yes |
| Exhaust connection diameter | 120 mm |
| Type | Wall-mounted |
| Product color | Metallic |
| Housing material | Metal |
| Motor included | Yes |
| Number of motors | 1 |
| Cord length | 1.3 m |
| Certification | CE, VDE |
| Exhaust location | Top |
| Grease filter type | Aluminum |
| Washable filter | Yes |
| Dishwasher proof filter | Yes |
| Width | 698 mm |
| Depth | 500 mm |
| Weight | 15240 g |
| Height (min) | 628 mm |
| Height (max) | 1064 mm |
| Height without chimney | 46 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens iQ500 LC77BHP50 below.
The Siemens iQ500 LC77BHP50 has a weight of 15240 g.
The Siemens iQ500 LC77BHP50 has the following certifications: CE, VDE.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Siemens iQ500 LC77BHP50 has a width of 698 mm.
The Siemens iQ500 LC77BHP50 has a depth of 500 mm.
The Siemens iQ500 LC77BHP50 has energy label A.
Yes, this means that this hood is very powerful and will quickly and efficiently remove odors and grease from your kitchen compared to hoods with lower extraction power.
Yes, this means that this hood is very energy efficient and will help save on your energy bills compared to hoods with lower efficiency ratings.
Yes, this means that this hood operates relatively quietly compared to other hoods with higher noise levels, allowing for a more peaceful cooking experience.
Yes, this means that you can quickly increase the extraction power when needed for intense cooking sessions, providing extra flexibility compared to hoods without this feature.
Yes, this makes maintenance of the hood easy and convenient, as you can simply wash the filters in the dishwasher, saving time and effort compared to hoods with non-washable filters.
To adjust the fan speed on the Siemens iQ500 LC77BHP50 exhaust hood, follow these steps: 1. Turn on the exhaust hood by pressing the symbol "#". The fan will start running at level ƒ. 2. Use the symbols "+" or "-" to modify the fan power and adjust the speed according to your preference. 3. To turn off the fan, press the symbol "#". Please note that the exhaust hood's lighting can be controlled independently from the fan. To turn the lighting on or off, press the symbol "=". If you want to adjust the brightness of the lighting, press and hold the symbol "=" until you reach the desired brightness level. The Siemens iQ500 LC77BHP50 exhaust hood also has an intensive level for strong odors and vapors. To activate the intensive level, press the symbol "@" until the number 2 is displayed. After approximately 6 minutes, the exhaust hood will automatically return to power level 3. To deactivate the intensive level before the set time elapses, press the symbol "A" to adjust the desired ventilation level. The exhaust hood also features a Boost function for maximum power. To activate the Boost function, press the symbol "&". After approximately 20 seconds, the exhaust hood will switch back to the previously set power level. To deactivate the Boost function before the set time elapses, press the symbol "&". The exhaust hood has an automatic shutdown feature as well. To activate the automatic shutdown, press the symbol "x". The fan will start running at level 1, and it will automatically turn off after approximately 10 minutes. To deactivate the automatic shutdown, press the symbol "x". The fan will immediately stop running. Please note that the exhaust hood has indicators to alert you of filter saturation. The corresponding symbols will flash after turning off the appliance: - "#" indicates the fan status (on/off) - "=" indicates the lighting status (on/off/dimmed) - "A" indicates the need to reduce the fan level - "@" indicates the need to increase the fan level or activate the intensive level (1, 2) - "&" indicates the Boost function (brief maximum power) - "x" indicates the fan's inertia mode The exhaust hood also has indicators for filter saturation: - "!" indicates saturation of the metal grease filter - """ indicates saturation of the activated carbon filter These steps should help you adjust the fan speed on the Siemens iQ500 LC77BHP50 exhaust hood.
The control panel of the Siemens iQ500 LC77BHP50 exhaust hood may not be responding due to various reasons. Here are the steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if there are any loose connections or tripped circuit breakers. 2. Reset the control panel: Try resetting the control panel by turning off the power to the exhaust hood for a few minutes and then turning it back on. This can help resolve any temporary software glitches. 3. Check the control panel buttons: Inspect the control panel buttons for any physical damage or debris that may be obstructing their functionality. Clean the buttons gently with a soft cloth if necessary. 4. Test the control panel functions: Press different buttons on the control panel to see if any specific functions are not responding. Note down the specific buttons or functions that are not working. 5. Contact customer support: If the control panel continues to be unresponsive after following the above steps, it is recommended to contact Siemens customer support for further assistance. Provide them with the details of the issue and the specific model number (Siemens iQ500 LC77BHP50) for accurate troubleshooting guidance. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model and configuration of the exhaust hood.
To turn on/off the lighting on the Siemens iQ500 LC77BHP50 exhaust hood, follow these steps: 1. Locate the control panel on the exhaust hood. 2. Press the symbol "=" to turn on the lighting. The lights will illuminate. 3. To adjust the brightness of the lights, press and hold the symbol "=" until the desired brightness is achieved. 4. To turn off the lighting, press the symbol "=" again. The lights will turn off. Please note that the lighting can be operated independently from the fan. This means that you can turn on/off the lights without affecting the fan operation. It is important to turn on the exhaust hood when starting to cook and turn it off a few minutes after finishing cooking to effectively remove cooking vapors. This helps maintain a clean and odor-free kitchen environment. Remember to follow the safety instructions provided in the manual to ensure proper and safe use of the exhaust hood.
Yes, the manual of the Siemens iQ500 LC77BHP50 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Siemens and is the answer not in the manual?
Question and answer
Number of questions: 0