Siemens iQ300 WT45H208IT manual

Siemens iQ300 WT45H208IT
8.5 · 26
PDF manual
 · 36 pages
English
manualSiemens iQ300 WT45H208IT
Installation and connection en
13

5 Installation and

connection

Installation and connection

Scope of delivery

Dryer
Installation and operating
instructions
Basket for woollens
*
Condensation drain*

Installing and connecting the

dryer

:Warning

Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Check the dryer for visible damage.
You must not operate the dryer if it is
damaged.
Before connecting the dryer to the
power supply, ensure that the
electric voltage specified on the
rating plate matches the voltage of
your socket.
Only use residual current circuit
breakers with the following symbol:
z.
Ensure that the mains cable is not
kinked or trapped and that it does
not come into contact with heat
sources or sharp edges.

:Warning

Children could lock themselves in the
dryer, putting their lives at risk!
Do not set up the dryer behind a door
or sliding door as this may obstruct the
dryer door or prevent it from opening.
Caution!
Risk of injury
As the dryer is heavy, you could
injure yourself by trying to lift it.
Do not lift the dryer on your own.
You could cut your hands on the
sharp edges of the dryer. Do not
hold the dryer by the sharp edges.
Protruding parts on the dryer may
break off when it is lifted or pushed.
Do not move the dryer by holding on
to protruding parts.
Caution!
Risk of material damage to the dryer or
fabrics
Check the dryer for damage caused
during transportation. Never operate
a dryer if it is damaged.
Any residual water in the dryer may
freeze and damage the dryer. Do not
install the dryer in rooms that are at
risk of frost.
During installation ensure that:
The dryer is placed on a clean, level
and firm surface,
The mains plug can be accessed at
all times,
The air inlet on the dryer is kept clear
and there is sufficient ventilation,
The area around the dryer is kept
clean and
The dryer is levelled using the
threaded feet.
Note: Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note: If in doubt, have the appliance
connected by a specialist.
* Depending on the model

View the manual for the Siemens iQ300 WT45H208IT here, for free. This manual comes under the category dryers and has been rated by 26 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Siemens iQ300 WT45H208IT or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 50
T
Tomasz MichalikOctober 28, 2020

I have a Siemens iQ300 8 kg dryer. After starting any program, the dryer runs for a few minutes and then finishes the program, meaning it turns off. You are not showing any malfunction.

This message has been automatically translated
M
Mathilda SvanströmMay 15, 2021

The Siemens iQ300 WT45H208IT dryer beeps after a while of drying each time... and a symbol blinks. It has two drops, a downward arrow, and is above something that looks like water.

The Siemens iQ300 WT45H208IT dryer beeps after a while of drying each time... and a symbol blinks. It has two drops, a downwa...
zoom-in
View photo
This message has been automatically translated
T
Terry dixon September 26, 2021

The clothes are not being dried properly. The drum goes round and there is heat . The program that should run for 2 hours only runs for 5 minutes , skips out about 1 hour 50 minutes. I have recently had a new belt fitted if that’s relevant. Any advice would be much appreciated, Thanks

The clothes are not being dried properly. The drum goes round and there is heat . The program that should run for 2 hours onl...
zoom-in
View photo
3 comments
E
Emma of manua.lsDecember 18, 2023

Based on the information provided, here are some steps you can take to address the issue of clothes not drying properly: 1. After the program has ended, if the warm laundry feels damper than it actually is, spread the laundry out and allow the heat to disperse. 2. Adjust the dryness level to a higher setting. This will extend the drying time without increasing the temperature, resulting in drier laundry. 3. Choose a program with a longer drying time or increase the dryness level. This will not increase the temperature. 4. If the laundry is still damp, you can select a timed program to add extra drying time. 5. Make sure you have not exceeded the maximum permitted load for the program, as this may prevent the laundry from drying properly. 6. Clean the moisture sensor in the drum. The sensor may become covered by a fine layer of limescale or residues of detergents and care products, which can affect its function. 7. Check if the fluff filter or the EasyClean filter is dirty. Cleaning them can help reduce the drying time. 8. Ensure that the air inlet on the dryer is not blocked or obstructed, as this can increase the drying time. 9. Make sure the room temperature is between 15°C and 30°C. Outside of this range, the drying time may increase. 10. If there is insufficient air circulation in the room, ventilate the room to improve drying efficiency.

This answer is automatically generated
M
Maria IndekeuNovember 7, 2021

How do I download the manual

M
Maria IndekeuNovember 7, 2021

how to download free manual pls?

R
Rufia AbassiMay 15, 2022

My dryer shows a flashing key symbol and t-shirt and cannot be started. What is the problem due to?

My dryer shows a flashing key symbol and t-shirt and cannot be started. What is the problem due to?
zoom-in
View photo
This message has been automatically translated
S
SaraMay 9, 2023

It turns off and dries itself after a few minutes and a symbol blinks on the screen which I don't understand. The middle one blinks when water drops, which means it has stopped??? Thank you in advance.

It turns off and dries itself after a few minutes and a symbol blinks on the screen which I don't understand. The middle one ...
zoom-in
View photo
This message has been automatically translated
N
Natalie HallalaFebruary 9, 2023

How do I deactivate the child lock?

This message has been automatically translated
Χ
ΧΡΥΣΑ ΚΑΚΑΛΟΥΛΗJanuary 20, 2023

"How do I clean the dryer? Besides the lint trap, do I need to clean anything else? It's not drying."

This message has been automatically translated
H
HakiNovember 8, 2020

The over water full indicator on and the machine stops and water tunk is not full. What I do

The Siemens iQ300 WT45H208IT is a freestanding dryer equipped with a heat pump drying system. With a right-hinge door, this dryer offers convenience and flexibility in placement. The control options on this appliance include both a rotary dial and a touch panel, allowing users to easily adjust settings to their preference. Featuring a drum volume of 112 liters, the dryer offers ample space to accommodate laundry loads. The drum is made of stainless steel, ensuring durability and resistance to wear and tear. Additionally, a built-in LED display provides clear and easy-to-read information during operation. The Siemens iQ300 WT45H208IT comes with a 1.45-meter long cord for easy accessibility to power sources. It meets CE and VDE certifications, guaranteeing safety and compliance with applicable standards. With a rated capacity of 8 kg, this dryer is capable of handling moderate-sized laundry loads. It is classified as drying class B, indicating its efficiency in removing moisture from clothes. The cycle time for a typical drying process is 203 minutes. In conclusion, the Siemens iQ300 WT45H208IT is a reliable and efficient dryer. Its features include a freestanding design, a heat pump drying system, and a durable stainless steel drum. The appliance offers a combination of rotary and touch controls for user convenience. The LED display provides clear information during operation, and the 8 kg rated capacity makes it suitable for average laundry needs. With its drying class B rating, it efficiently removes moisture from clothes in a cycle time of 203 minutes. Overall, the Siemens iQ300 WT45H208IT is a dependable choice for those in need of an effective and user-friendly dryer.

General
BrandSiemens
ModeliQ300 WT45H208IT | WT45H208IT
Productdryer
EAN4242003771235
LanguageEnglish
FiletypeUser manual (PDF)
Design
Appliance placementFreestanding
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Door hingeRight
Control typeRotary, Touch
Drum volume112 L
Built-in displayYes
Display typeLED
Drum materialStainless steel
Cord length1.45 m
CertificationCE, VDE
Performance
Drum capacity8 kg
Drying classB
Cycle time203 min
Noise level65 dB
Anti-Crease functionYes
Anti-Crease cycle120 min
Adjustable spin speedYes
Adjustable drying levelYes
Refrigerating mediumR134a
Wool, Mix, Sport, Quick, Delicate/silk, Blouse/shirt, Lingerie, Cotton, Towel
Ergonomics
Child lockYes
BuzzerYes
LED program stage indicatorYes
Drum interior lightNo
Delayed start timerYes
Remaining time indicationYes
Filter cleaning indicatorYes
Water tank full indicatorYes
Adjustable feetYes
Feet adjustment15 mm
Power
Energy efficiency classA++
Connected load600 W
Annual energy consumption236 kWh
Energy consumption1.9 kWh
Heat sourceElectric
Power consumption (off)0.1 W
Power consumption (standby)0.5 W
AC input frequency50 Hz
AC input voltage220 - 240 V
Current10 A
Weight & dimensions
Width598 mm
Depth599 mm
Height842 mm
Depth with door open1091 mm
Weight51000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens iQ300 WT45H208IT below.

What is a condenser dryer?

A condenser dryer is a dryer in which condensation ends up in a reservoir.

What is a drain dryer?

A drain dryer is a dryer in which the warm air and condensation are drained through a hose.

What is the best thing to do about a smelly dryer?

It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.

There is a burning smell from my dryer, now what?

Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.

What is the weight of the Siemens iQ300 WT45H208IT?

The Siemens iQ300 WT45H208IT has a weight of 51000 g.

What certifications does the Siemens iQ300 WT45H208IT have?

The Siemens iQ300 WT45H208IT has the following certifications: CE, VDE.

What is the height of the Siemens iQ300 WT45H208IT?

The Siemens iQ300 WT45H208IT has a height of 842 mm.

What is the width of the Siemens iQ300 WT45H208IT?

The Siemens iQ300 WT45H208IT has a width of 598 mm.

What is the depth of the Siemens iQ300 WT45H208IT?

The Siemens iQ300 WT45H208IT has a depth of 599 mm.

What energy label does the Siemens iQ300 WT45H208IT have?

The Siemens iQ300 WT45H208IT has energy label A++.

Why is my dryer not turning on?

Check if the power cord is securely plugged into a working electrical outlet. Also make sure that the program selector knob is turned to the desired program and that the door is closed properly.

Why is my laundry taking a long time to dry?

Ensure that you have selected the correct drying program suitable for the type and amount of laundry. Additionally, check if the lint filter is clean and if the dryer's ventilation system is free from any blockages, as these can affect drying time.

How do I prevent excessive wrinkling of my clothes in the dryer?

Shake out your clothes before loading them into the dryer to help reduce wrinkles. Avoid overloading the dryer, as this can lead to inadequate airflow and increased wrinkling. Consider using the appropriate anti-wrinkle or delicate program for your clothing.

What should I do if there is a strange odor coming from the dryer?

Check if there is any lint accumulated in the lint filter, as it may cause unpleasant odors. Clean the lint filter regularly and ensure proper ventilation of the dryer's exhaust system. Also, periodically wipe the drum and door seal with a damp cloth to eliminate any residual odors.

Why does my dryer make excessive noise?

Make sure that the dryer is installed on a stable and level surface, as an uneven surface can result in vibrations and noise. Check if any foreign objects, such as buttons or coins, are rattling inside the drum. If the noise persists, contact a professional technician to inspect the dryer's motor or other internal components.

Does the Siemens iQ300 WT45H208IT have a built-in display?

Yes, the Siemens iQ300 WT45H208IT has a built-in display. This means that the user can easily see and control the settings of the dryer.

Is the control type of the Siemens iQ300 WT45H208IT rotary and touch?

Yes, the control type of the Siemens iQ300 WT45H208IT is rotary and touch. This provides the user with multiple options to operate the dryer based on their preference.

What is the drum volume of the Siemens iQ300 WT45H208IT?

The drum volume of the Siemens iQ300 WT45H208IT is 112 L. This means that it can accommodate a large amount of laundry, allowing the user to dry more clothes in one cycle.

Can the Siemens iQ300 WT45H208IT adjust spin speed?

Yes, the Siemens iQ300 WT45H208IT can adjust its spin speed. This feature allows the user to select the appropriate spin speed based on the type of fabric and desired drying result.

Does the Siemens iQ300 WT45H208IT have an Anti-Crease function and cycle?

Yes, the Siemens iQ300 WT45H208IT has an Anti-Crease function and cycle. This means that it helps to reduce creases in the laundry, making it easier for the user to iron or wear the clothes after drying.

Is the manual of the Siemens iQ300 WT45H208IT available in English?

Yes, the manual of the Siemens iQ300 WT45H208IT is available in English .

Is your question not listed? Ask your question here

No results