Siemens iQ300 SN236I03ME manual

Siemens iQ300 SN236I03ME
7.7 · 25
PDF manual
 · 50 pages
manualSiemens iQ300 SN236I03ME
en Operating the appliance

Ï intensiveZone *

i nt ens i v eZone
Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket
is intensified, the rinsing temperature
is increased slightly.

¿ extraDry *

ext r aDr y
An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.

ï Shine and Dry *

Sh i n e and Dr y
By increasing the amount of water
during the rinse cycle and extending the
drying phase, stains are prevented and
the drying result is improved. There is a
slight increase in the energy
consumption. Rinse aid is
recommended for the high gloss drying
function (even when using combination

ß Energy Save *

Ener gy Sa v e
The “Energy Save” function can be
used to reduce water and energy
consumption. The running time
is extended for optimum cleaning and
drying results.

1 Operating the


Oper at i ng the appl i ance

Programme data

The programme data (consumption
values) can be found in the quick
reference guide. They refer to normal
conditions and the set water hardness
value :‹…. Different influencing factors
such as water temperature or line
pressure may result in deviations.

AquaSensor *

AquaSens or
* depending on the features of your
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
The AquaSensor is used according
to the programme. If the AquaSensor is
active, “clean” rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater,
the water is drained and is replaced
with fresh water. In the automatic
programmes the temperature
and running time can also be adjusted
to the degree of soiling.


View the manual for the Siemens iQ300 SN236I03ME here, for free. This manual comes under the category Dishwashers and has been rated by 25 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Siemens iQ300 SN236I03ME or do you need help? Ask your question here

Need help?

Do you have a question about the Siemens iQ300 SN236I03ME and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Siemens iQ300 SN236I03ME owners to provide you with a good answer.

Gary Piggott • 16-8-2020 No comments

Where can I get a rear foot adjustment tool for IQ300 dishwasher, ours has disappeared.....

Where can I get a rear foot adjustment tool for IQ300 dishwasher, ours has disappeared.....
View photo
Answer this question
David marrs • 1-8-2022 No comments

Hi hope you can help me my kick plate on my iq 300 dishwasher is not fully in position so when you open the door it rubs on the back of the kick plate

Answer this question

Number of questions: 2

Siemens iQ300 SN236I03ME specifications

Below you will find the product specifications and the manual specifications of the Siemens iQ300 SN236I03ME.

Brand Siemens
Model iQ300 SN236I03ME | SN236I03ME
Product Dishwasher
EAN 4242003770207
Language English
Filetype Usermanual (PDF)
Appliance placement Freestanding
Product size Full size (60 cm)
Door colour Stainless steel
Control panel colour Stainless steel
Control type Buttons
Built-in display
Display type LED
Cord length 1.75 m
Inlet hose length 1.65 m
Outlet hose length 1.9 m
Baskets adjustable placement Lower,Upper
Cutlery compartment type Basket
Lower built-in capability (topless)
Tub material Stainless steel
Sensor program selection
Self-cleaning filter
Child lock
Adjustable feet
Feet adjustment 20 mm
Number of place settings 14 place settings
Noise level 44 dB
Number of washing programs 6
Temperature (max) 70 °C
Cycle time 210 min
Delayed start timer
Delay start (max) 24 h
Integrated timer
AquaStop function
AquaSensor function
Dishwashing programs 3-in-1,Auto,Auto 45-65°C,Eco,Glass/delicate,Intensive,Pre-wash
Drying system Heat exchanger
Number of temperature settings 5
Other features
Drying class A
Annual energy consumption 266 kWh
Annual water consumption 2660 L
Washing class A
Energy efficiency class (old) A+
Energy consumption per cycle 0.93 kWh
Water consumption per cycle 9.5 L
Connected load 2400 W
AC input voltage 220 - 240 V
AC input frequency 50 - 60 Hz
Current 10 A
Power consumption (off) 0.5 W
Weight & dimensions
Width 600 mm
Depth 600 mm
Height 815 mm
Weight 52000 g
Package width 660 mm
Package depth 680 mm
Package height 880 mm
Package weight 54000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Siemens iQ300 SN236I03ME below.

Is your question not listed? Ask your question here

No results