Shure ANI4OUT manual

Shure ANI4OUT
8.6 · 1
PDF manual
 · 23 pages
English
manualShure ANI4OUT
Shure Incorporated
9/23

Input: Dante Digital Audio

A single network cable delivers 4 channels of audio and Power over Ethernet (PoE). Use Dante Controller to route audio chan
nels from the network to the network interface.

Output: Analog (4 XLR or Block Connectors)

Each output sends a discrete audio channel to connect to an analog device.

Setting up the Audio Network

Shure networked conferencing systems are comprised of Microflex Advance microphones and network interfaces, which oper
ate entirely on a Dante network. Additional hardware, including network switches, computers, loudspeakers, and audio proces
sors are described in the hardware component index.
Shure components shown in this diagram:

Microflex Advance Microphones

The MXA910 and MXA310 are equipped with Dante outputs, and connect directly to a network switch.

Audio Network Interfaces

The interfaces are used to connect analog devices such as loudspeakers and analog microphones to the network.
ANI4IN: Converts 4 analog signals (separate XLR and block connector models available) into Dante digital audio signals.
ANI4OUT: Converts 4 channels of Dante audio from the network into analog signals.
This diagram shows the entire signal path through a networked conference system. Signals from the near end and far
end are exchanged through an audio processor connected to a phone system, or through a computer connected to
the internet. Analog microphones connect to the network through the Shure ANI4IN, while loudspeakers connect
through the Shure ANI4OUT.

Manual

View the manual for the Shure ANI4OUT here, for free. This manual comes under the category hand blenders and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Shure ANI4OUT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Shure and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Shure ANI4OUT specifications

Below you will find the product specifications and the manual specifications of the Shure ANI4OUT.

General
BrandShure
ModelANI4OUT | ANI4OUT-XLR
Producthand blender
EAN0042406475457
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Audio
Frequency range20 - 20000 Hz
Dynamic range117 dB
Total Harmonic Distortion (THD) + noise0.05 %
Channels quantity4 channels
Balanced line output level20 dB
Power
Power consumption (typical)10 W
External power supplyYes
Operational conditions
Operating temperature (T-T)-6.7 - 40 °C
Storage temperature (T-T)-29 - 74 °C
Network
Ethernet LANYes
Design
Product colorBlack
Ports & interfaces
Ethernet LAN (RJ-45) ports1
XLR inputs4
Weight & dimensions
Width140 mm
Depth128 mm
Height40 mm
Weight663 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Shure ANI4OUT below.

What is the weight of the Shure ANI4OUT?

The Shure ANI4OUT has a weight of 663 g.

What is the height of the Shure ANI4OUT?

The Shure ANI4OUT has a height of 40 mm.

What is the width of the Shure ANI4OUT?

The Shure ANI4OUT has a width of 140 mm.

What is the depth of the Shure ANI4OUT?

The Shure ANI4OUT has a depth of 128 mm.

Is the manual of the Shure ANI4OUT available in English?

Yes, the manual of the Shure ANI4OUT is available in English .

Is your question not listed? Ask your question here

No results