Shure ANI4OUT manual

Shure ANI4OUT
8.6 · 1
PDF manual
 · 23 pages
English
manualShure ANI4OUT
Shure Incorporated
22/23
Aux 20 dB
Mic 46 dB
Output Impedance
150 Ω
Built-in Digital Signal Processing
Per Channel Equalizer (4band Parametric) , Mute, Invert Polarity, Gain ( 140 dB range)
System Audio Summing

Networking

Cable Requirements
Cat 5e or higher (shielded cable recommended)

IP Ports and Protocols

Shure Control

Port TCP/UDP Protocol Description
Factory De
fault
21 TCP FTP Required for firmware updates (otherwise closed) Closed
22 TCP SSH Secure Shell Interface Closed
23 TCP Telnet Not supported Closed
53 UDP DNS Domain Name System Closed
67 UDP DHCP Dynamic Host Configuration Protocol Open
68 UDP DHCP Dynamic Host Configuration Protocol Open
80* TCP HTTP Required to launch embedded web server Open
443 TCP HTTPS Not supported Closed
2202 TCP ASCII Required for 3rd party control strings Open
5353 UDP mDNS Required for device discovery Open
5568 UDP SDT (multicast) Required for inter-device communication Open
57383 UDP SDT (unicast) Required for inter-device communication Open
8023 TCP Telnet Debug console interface Closed
8180 TCP HTML Required for web application (legacy firmware only) Open
8427 UDP SLP (multicast) Required for inter-device communication Open
64000 TCP Telnet Required for Shure firmware update Open

Manual

View the manual for the Shure ANI4OUT here, for free. This manual comes under the category hand blenders and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Shure ANI4OUT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Shure and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Shure ANI4OUT specifications

Below you will find the product specifications and the manual specifications of the Shure ANI4OUT.

General
BrandShure
ModelANI4OUT | ANI4OUT-XLR
Producthand blender
EAN0042406475457
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Audio
Frequency range20 - 20000 Hz
Dynamic range117 dB
Total Harmonic Distortion (THD) + noise0.05 %
Channels quantity4 channels
Balanced line output level20 dB
Power
Power consumption (typical)10 W
External power supplyYes
Operational conditions
Operating temperature (T-T)-6.7 - 40 °C
Storage temperature (T-T)-29 - 74 °C
Network
Ethernet LANYes
Design
Product colorBlack
Ports & interfaces
Ethernet LAN (RJ-45) ports1
XLR inputs4
Weight & dimensions
Width140 mm
Depth128 mm
Height40 mm
Weight663 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Shure ANI4OUT below.

What is the weight of the Shure ANI4OUT?

The Shure ANI4OUT has a weight of 663 g.

What is the height of the Shure ANI4OUT?

The Shure ANI4OUT has a height of 40 mm.

What is the width of the Shure ANI4OUT?

The Shure ANI4OUT has a width of 140 mm.

What is the depth of the Shure ANI4OUT?

The Shure ANI4OUT has a depth of 128 mm.

Is the manual of the Shure ANI4OUT available in English?

Yes, the manual of the Shure ANI4OUT is available in English .

Is your question not listed? Ask your question here

No results