Shure ANI4OUT manual

Shure ANI4OUT
8.6 · 1
PDF manual
 · 23 pages
English
manualShure ANI4OUT
Shure Incorporated
11/23
1.
2.
3.

Summing

The Audio Network Interface provides channel summing to combine Dante signals from the network, and send them over a sin
gle analog output. This makes it possible to send all channels to a device with a limited amount of analog input channels. Mixer
functionality does not change; audio channels are simply sent as one combined signal.
Note: When summing is enabled, a limiter is activated to prevent signal overloading. The limiter never applies to the direct outputs, and only affects the
summed signal.
To enable, select one of the summing options in the toolbar at the top of the mixer in the channels tab.

Encryption

Audio is encrypted with the Advanced Encryption Standard (AES-256), as specified by the US Government National Institute of
Standards and Technology (NIST) publication FIPS-197. Shure devices that support encryption require a passphrase to make
a connection. Encryption is not supported with third-party devices.
To activate encryption:
Open the Settings menu and select the General tab.
Select Enable Encryption.
Enter a passphrase. All devices must use the same passphrase to establish an encrypted connection.
Important: For encryption to work, all Shure devices on your network must use encryption.
If you’re using Shure Designer software to configure your system, please check the Designer help section for more about this topic.

Software Installation, Management, and Security

Software Installation and Device Discovery

The Shure Web Device Discovery application is used to access the web application for a Shure device. The web application
opens in a web browser to provide comprehensive device management. Any computer networked to the device can access the
GUI with this application.
Compatible Browsers:
Chrome
Safari
Firefox

Manual

View the manual for the Shure ANI4OUT here, for free. This manual comes under the category hand blenders and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Shure ANI4OUT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Shure and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Shure ANI4OUT specifications

Below you will find the product specifications and the manual specifications of the Shure ANI4OUT.

General
BrandShure
ModelANI4OUT | ANI4OUT-XLR
Producthand blender
EAN0042406475457
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Audio
Frequency range20 - 20000 Hz
Dynamic range117 dB
Total Harmonic Distortion (THD) + noise0.05 %
Channels quantity4 channels
Balanced line output level20 dB
Power
Power consumption (typical)10 W
External power supplyYes
Operational conditions
Operating temperature (T-T)-6.7 - 40 °C
Storage temperature (T-T)-29 - 74 °C
Network
Ethernet LANYes
Design
Product colorBlack
Ports & interfaces
Ethernet LAN (RJ-45) ports1
XLR inputs4
Weight & dimensions
Width140 mm
Depth128 mm
Height40 mm
Weight663 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Shure ANI4OUT below.

What is the weight of the Shure ANI4OUT?

The Shure ANI4OUT has a weight of 663 g.

What is the height of the Shure ANI4OUT?

The Shure ANI4OUT has a height of 40 mm.

What is the width of the Shure ANI4OUT?

The Shure ANI4OUT has a width of 140 mm.

What is the depth of the Shure ANI4OUT?

The Shure ANI4OUT has a depth of 128 mm.

Is the manual of the Shure ANI4OUT available in English?

Yes, the manual of the Shure ANI4OUT is available in English .

Is your question not listed? Ask your question here

No results