Sharp PN-Y436 manual

Sharp PN-Y436
6.2 · 1
PDF manual
 · 53 pages
English
manualSharp PN-Y436
44
E

Troubleshooting

If you are experiencing any problem with your display, before
calling for service, please review the following troubleshooting
tips.
There is no picture or sound.
Is the power cord disconnected? (See page 14.)
Is the main power switch off? (See page 18.)
Is the monitor in standby mode (the power LED illuminating
in orange)? (See page 18.)
Make sure correct input mode is selected. (See page 20.)
If any external equipment is connected, make sure the
equipment is operating (playing back).
Remote control does not work.
Are the batteries inserted with polarity (+,-) aligned? (See
page 17.)
Are the batteries exhausted?
Point the remote control unit toward the monitor’s remote
control sensor. (See page 17.)
Is operation disabled? (See page 30.)
Sound from left and right speakers is reversed.
Are audio cables connected properly?
There is a picture but no sound.
Is the sound muted?
Make sure the volume is not set to minimum.
Are audio cables connected properly?
Is the cable correctly connected to the PC audio input
terminal or AV audio input terminal as appropriate for the
input mode? (See page 13.)
Is AUDIO OUTPUT or SPEAKER correctly set on the
SETUP menu? (See page 29.)
Unstable video.
The signal may be incompatible.
The video from the HDMI input terminal does not appear
properly.
Is the HDMI cable HDMI standard compliant? The monitor
will not work with cables that are not standard compliant.
Is the input signal compatible with this monitor? (See page
49.)
If an AV signal such as 1920 x 1080i, 720(1440) x 576i, or
720 (1440) x 480i is displayed using the HDMI[PC] input,
display problems such as faint colors may occur. Display
using HDMI[AV].
The video from the DVI-D input terminal does not appear
properly.
Is the input signal compatible with this monitor? (See page
49.)
Turn off the power to the connected equipment and then
turn the power on again.
If the monitors are connected in a daisy chain, turn off the
power to all the monitors connected in a daisy chain and
then turn the power on again.
If an AV signal such as 1920 x 1080i, 720(1440) x 576i,
or 720 (1440) x 480i is displayed using the DVI-D input,
display problems such as faint colors may occur. Display
using HDMI[AV], D-SUB[COMPONENT] or D-SUB[VIDEO].
The video from D-Sub input terminal does not appear
properly.
Is the input signal compatible with this monitor? (See page 49.)
Control buttons do not work.
There is no picture.
Load noises from outside may be interfering with normal
operation. Turn off the power and turn it on after waiting at
least 5 seconds, and then check the operation.
The monitor makes a cracking sound.
You may occasionally hear a cracking sound from the
monitor. This happens when the cabinet slightly expands
and contracts according to change in temperature. This
does not affect the monitor’s performance.
Operation is not possible when a USB ash drive / SD
memory card is connected.
Operation using the remote control or otherwise may not be
possible if a USB ash drive and SD memory card are both
connected. Switch off the main power switch, remove either
device, and then switch on the main power switch.
It takes a longer time until the monitor starts up.
When a USB ash drive or an SD memory card is
connected, it is better to turn the power ON/OFF using the
remote control unit. When the power is turned ON using
the main power switch with a USB ash drive or an SD
memory card connected, the monitor startup takes a longer
time because the monitor checks USB terminal or SD card
slot connection after checking other terminal connections.
A le in the USB ash drive or the SD memory card does
not play properly.
Is the le in a supported format? (See page 26.)
The following problems may occur if a non-supported
format is used:
- The le does not play properly.
- Pausing or Move forward/back cannot be performed
during playback.
- Abnormal play speed
- Operations cannot be performed during playback
- Playback stops. The player application restarts.
When using a USB ash drive, is the cable connected to
the power supply terminal? (See page 10.)
Are both a USB ash drive and SD memory card
connected? These cannot be connected simultaneously.
The screen turns black when a le in a USB ash drive or
an SD memory card is played.
The screen will turn black if none of the les in the play list
are in the USB ash drive or the SD memory card. Press
INPUT
to exit.
No power is supplied from the power supply terminal.
Is the cable connected to the USB terminal? (See page
10.)
Check the power specications (5V, 2A).
If overcurrent occurs, a protective circuit will activate and
stop the supply of power. Remove the connected device
and then eliminate the cause of the overcurrent.
The USB ash drive is not recognized.
Did you connect an unsupported device such as a USB
keyboard? Switch the main power switch off and on.

Manual

View the manual for the Sharp PN-Y436 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Sharp PN-Y436 or do you need help? Ask your question here

Need help?

Do you have a question about the Sharp and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
H
Humberto Navarro April 26, 2024

Cual es el modelo del control remoto para pantalla Sharp PN-Y496

Sharp PN-Y436 specifications

Below you will find the product specifications and the manual specifications of the Sharp PN-Y436.

The Sharp PN-Y436 is a professional LED monitor with a display diagonal of 43 inches (107.98 centimeters) and a resolution of 1920 x 1080 pixels, providing Full HD quality. With a display brightness of 450 cd/m² and a contrast ratio of 1100:1, this monitor offers clear and vibrant visuals. Designed for 24/7 display applications, the PN-Y436 features a powerful embedded USB media player for easy content display without the need for additional hardware. The monitor has a response time of 12 milliseconds and an active display area of 941.2 x 529.4 millimeters. It also boasts a plug and play functionality for quick and straightforward setup. The monitor's sleek and elegant cabinet design makes it suitable for various applications such as retail shops, hospitality venues, reception areas, and lobbies. It can be installed in either portrait or landscape mode and supports Daisy Chain capability for connecting multiple units together for mirrored display content. Sharp's PN-Y436 also offers the optional Sharp Content Distributor (SCD) software for easy content management and scheduling over LAN to the USB Media Player. With state-of-the-art LED backlight technology and versatile installation options, the PN-Y436 is a reliable and efficient solution for professional signage needs.

General
BrandSharp
ModelPN-Y436 | PN-Y436
Productmonitor
EAN4974019903972, 0074000066410
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal43 "
Display diagonal (metric)107.98 cm
Display technologyLED
Display resolution1920 x 1080 pixels
Display brightness450 cd/m²
HD typeFull HD
Response time12 ms
Display number of colors16.78 million colors
Pixel pitch0.49 x 0.49 mm
Contrast ratio (typical)1100:1
Viewing angle, horizontal178 °
Viewing angle, vertical178 °
Active display area (W x H)941.2 x 529.4 mm
LED backlighting typeEdge-Lit LED
Panel life- h
TouchscreenNo
Other features
Plug and PlayYes
Power managementYes
DVI output ports1
DVI input ports1
RS-232 output ports1
RS-232 input ports1
ManualYes
Performance
Analog signal format systemNTSC
HDCPYes
Operating hours (hours/days)24/7
TV tuner integratedNo
Multi-display supported-
Design
Product colorBlack
Panel mounting interface400 x 400 mm
OrientationHorizontal/Vertical
Bezel width (side)9.5 mm
Bezel width (top)9.5 mm
Bezel width (bottom)15.6 mm
VESA mountingYes
Product designDigital signage flat panel
Ports & interfaces
DVI portYes
DVI-D ports quantity2
VGA (D-Sub) input ports1
Ethernet LANYes
HDMI ports quantity1
USB ports quantity1
RS-232CYes
Ethernet LAN (RJ-45) ports1
PC Audio inYes
Ethernet LAN data rates10, 100 Mbit/s
Card reader integratedYes
Compatible memory cardsSD
Audio
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power14 W
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)76 W
Power consumption (standby)- W
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Weight & dimensions
Width965 mm
Depth46 mm
Height559 mm
Weight10500 g
Packaging content
Cables includedAC
Handheld remote controlYes
Batteries includedYes
Computer system
Computer systemNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sharp PN-Y436 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What is the weight of the Sharp PN-Y436?

The Sharp PN-Y436 has a weight of 10500 g.

What is the screen size of the Sharp PN-Y436?

The screen size of the Sharp PN-Y436 is 43 ".

What is the height of the Sharp PN-Y436?

The Sharp PN-Y436 has a height of 559 mm.

What is the screen resolution of the display of the Sharp PN-Y436?

The screen resolution of the Sharp PN-Y436 is 1920 x 1080 pixels.

What is the width of the Sharp PN-Y436?

The Sharp PN-Y436 has a width of 965 mm.

What is the depth of the Sharp PN-Y436?

The Sharp PN-Y436 has a depth of 46 mm.

Is the manual of the Sharp PN-Y436 available in English?

Yes, the manual of the Sharp PN-Y436 is available in English .

Is your question not listed? Ask your question here

No results