Sharp PN-Y436 manual

Sharp PN-Y436
6.2 · 1
PDF manual
 · 53 pages
English
manualSharp PN-Y436
35
E

Controlling the Monitor with a computer (RS-232C)

You can control this monitor from a computer via RS-232C
(COM port) on the computer.
You can also connect multiple monitors via a daisy chain by
using a computer. By assigning ID numbers to each monitor
(see page 36), you can make input mode selection/adjustment
or can check the status of a specic monitor.
TIPS
To control the monitor via RS-232C, set POWER SAVE
MODE to OFF.

Computer connection

n
One-to-one connection with a computer
Connect with RS-232 straight cable between the computer’s
COM port (RS-232C connector) and the RS-232C input
terminal on the monitor.
To COM port
Computer
RS-232C
input terminal
RS-232 straight cable
(commercially available)
n
Daisy chain connection…
Advanced operation
PN-Y556/PN-Y496/PN-Y436/PN-Y326 or PN-Y555/PN-Y475/
PN-Y425/PN-Y325 monitors can be connected together in a
daisy chain connection.
Connect with RS-232 straight cable between the computer’s
COM port (RS-232C connector) and the RS-232C input
terminal on the rst monitor.
Next, connect RS-232 straight cable to the rst monitor’s
RS-232C output terminal and to the second monitor’s
RS-232C input terminal. Connect in the same way to the third
and subsequent monitors.
Up to 25 monitors can be connected. (Depending on the
length of the cable used and the surrounding environment.)
To COM port
Computer
First monitorSecond monitor
RS-232C
output
terminal
RS-232C
output
terminal
RS-232C
input
terminal
RS-232C
input
terminal
RS-232 straight cables
(commercially available)

Communication conditions

Set the RS-232C communication settings on the computer to
match the monitor’s communication settings as follows:
Baud rate 9600bps
Stop bit
1 bit
Data length 8 bits Flow control None
Parity bit None

Communication procedure

n
Command format
When a command is sent from the computer to the monitor,
the monitor operates according to the received command and
sends a response message to the computer.
C1 C2 C3 C4 P1 P2 P3 P4
Return code
Command field
(4 prescribed
alphanumerical characters
)
Parameter field
(4 character string comprised of:
0-9, +, -, space, ?)
Example: VOLM0030
VOLM
30
* Be sure to input 4 characters for the parameter. Pad with
spaces (“
”) if necessary.
(“
” is a return code (0D
H
, 0A
H
or 0D
H
))
Wrong : VOLM30
Right : VOLM 30
Do not use spaces for DATE. Specify parameters using a
specied number of characters.
If a command has “R” listed for “DIRECTION” in the
“RS-232C command table” on page 39, the current value can
be returned by using “?” as the parameter.
Example:
VOLM ? ? ? ?
From computer to monitor
(How much is current volume
setting?).
30
From monitor to computer
(Current volume setting: 30).
* If an ID number (see page 36) has been assigned
(For example, ID number = 1).
VOLM
?
From computer to
monitor.
30 001
From monitor to
computer.

Manual

View the manual for the Sharp PN-Y436 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Sharp PN-Y436 or do you need help? Ask your question here

Need help?

Do you have a question about the Sharp and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
H
Humberto Navarro April 26, 2024

Cual es el modelo del control remoto para pantalla Sharp PN-Y496

Sharp PN-Y436 specifications

Below you will find the product specifications and the manual specifications of the Sharp PN-Y436.

The Sharp PN-Y436 is a professional LED monitor with a display diagonal of 43 inches (107.98 centimeters) and a resolution of 1920 x 1080 pixels, providing Full HD quality. With a display brightness of 450 cd/m² and a contrast ratio of 1100:1, this monitor offers clear and vibrant visuals. Designed for 24/7 display applications, the PN-Y436 features a powerful embedded USB media player for easy content display without the need for additional hardware. The monitor has a response time of 12 milliseconds and an active display area of 941.2 x 529.4 millimeters. It also boasts a plug and play functionality for quick and straightforward setup. The monitor's sleek and elegant cabinet design makes it suitable for various applications such as retail shops, hospitality venues, reception areas, and lobbies. It can be installed in either portrait or landscape mode and supports Daisy Chain capability for connecting multiple units together for mirrored display content. Sharp's PN-Y436 also offers the optional Sharp Content Distributor (SCD) software for easy content management and scheduling over LAN to the USB Media Player. With state-of-the-art LED backlight technology and versatile installation options, the PN-Y436 is a reliable and efficient solution for professional signage needs.

General
BrandSharp
ModelPN-Y436 | PN-Y436
Productmonitor
EAN4974019903972, 0074000066410
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal43 "
Display diagonal (metric)107.98 cm
Display technologyLED
Display resolution1920 x 1080 pixels
Display brightness450 cd/m²
HD typeFull HD
Response time12 ms
Display number of colors16.78 million colors
Pixel pitch0.49 x 0.49 mm
Contrast ratio (typical)1100:1
Viewing angle, horizontal178 °
Viewing angle, vertical178 °
Active display area (W x H)941.2 x 529.4 mm
LED backlighting typeEdge-Lit LED
Panel life- h
TouchscreenNo
Other features
Plug and PlayYes
Power managementYes
DVI output ports1
DVI input ports1
RS-232 output ports1
RS-232 input ports1
ManualYes
Performance
Analog signal format systemNTSC
HDCPYes
Operating hours (hours/days)24/7
TV tuner integratedNo
Multi-display supported-
Design
Product colorBlack
Panel mounting interface400 x 400 mm
OrientationHorizontal/Vertical
Bezel width (side)9.5 mm
Bezel width (top)9.5 mm
Bezel width (bottom)15.6 mm
VESA mountingYes
Product designDigital signage flat panel
Ports & interfaces
DVI portYes
DVI-D ports quantity2
VGA (D-Sub) input ports1
Ethernet LANYes
HDMI ports quantity1
USB ports quantity1
RS-232CYes
Ethernet LAN (RJ-45) ports1
PC Audio inYes
Ethernet LAN data rates10, 100 Mbit/s
Card reader integratedYes
Compatible memory cardsSD
Audio
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power14 W
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)76 W
Power consumption (standby)- W
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Weight & dimensions
Width965 mm
Depth46 mm
Height559 mm
Weight10500 g
Packaging content
Cables includedAC
Handheld remote controlYes
Batteries includedYes
Computer system
Computer systemNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sharp PN-Y436 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What is the weight of the Sharp PN-Y436?

The Sharp PN-Y436 has a weight of 10500 g.

What is the screen size of the Sharp PN-Y436?

The screen size of the Sharp PN-Y436 is 43 ".

What is the height of the Sharp PN-Y436?

The Sharp PN-Y436 has a height of 559 mm.

What is the screen resolution of the display of the Sharp PN-Y436?

The screen resolution of the Sharp PN-Y436 is 1920 x 1080 pixels.

What is the width of the Sharp PN-Y436?

The Sharp PN-Y436 has a width of 965 mm.

What is the depth of the Sharp PN-Y436?

The Sharp PN-Y436 has a depth of 46 mm.

Is the manual of the Sharp PN-Y436 available in English?

Yes, the manual of the Sharp PN-Y436 is available in English .

Is your question not listed? Ask your question here

No results