Sharp PN-R903A manual

Sharp PN-R903A
6.6 · 1
PDF manual
 · 62 pages
English
manualSharp PN-R903A
3
E

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within
a triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING:
FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
This product utilizes a CR coin Lithium battery which contains a Perchlorate material.
Special handling for this material may apply,
California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/
Others, consult local environmental ofcers.
U.S.A. ONLY

Manual

View the manual for the Sharp PN-R903A here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Sharp PN-R903A or do you need help? Ask your question here

Need help?

Do you have a question about the Sharp and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Sharp PN-R903A specifications

Below you will find the product specifications and the manual specifications of the Sharp PN-R903A.

General
BrandSharp
ModelPN-R903A | PN-R903A
Productmonitor
EAN4974019771762, 4974019916002, 0074000066595
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal90 "
Display resolution1920 x 1080 pixels
Display technologyLED
HD typeFull HD
Panel typeUV2A
Display number of colors1.06 billion colors
Pixel pitch1.038 x 1.038 mm
Display brightness700 cd/m²
Contrast ratio (typical)4000:1
Response time6 ms
Viewing angle, horizontal176 °
Viewing angle, vertical176 °
Active display area (W x H)1992 x 1120 mm
Panel life- h
TouchscreenNo
Other features
Power managementYes
Plug and PlayYes
Ports & interfaces
Ethernet LANYes
DisplayPorts quantity1
DVI portYes
DVI-I ports quantity1
VGA (D-Sub) input ports1
HDMI ports quantity2
RS-232CYes
DVI-D ports quantity1
PC Audio inYes
USB portNo
Performance
Analog signal format systemNTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, SECAM
HDCPYes
PurposeUniversal
TV tuner integratedNo
Audio
Built-in speaker(s)Yes
Number of built-in speakers2
Design
VESA mountingYes
Product colorBlack
Product designDigital signage flat panel
Panel mounting interface600 x 400,600 x 600 mm
Placement supportedIndoor
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)660 W
Power consumption (standby)- W
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Computer system
Computer systemNo
Weight & dimensions
Width2054 mm
Depth122 mm
Height1196 mm
Weight74978 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sharp PN-R903A below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What is the weight of the Sharp PN-R903A?

The Sharp PN-R903A has a weight of 74978 g.

What is the screen size of the Sharp PN-R903A?

The screen size of the Sharp PN-R903A is 90 ".

What is the height of the Sharp PN-R903A?

The Sharp PN-R903A has a height of 1196 mm.

What is the screen resolution of the display of the Sharp PN-R903A?

The screen resolution of the Sharp PN-R903A is 1920 x 1080 pixels.

What is the width of the Sharp PN-R903A?

The Sharp PN-R903A has a width of 2054 mm.

What is the depth of the Sharp PN-R903A?

The Sharp PN-R903A has a depth of 122 mm.

Does the Sharp PN-R903A have a display resolution of 1920 x 1080 pixels?

Yes, the Sharp PN-R903A has a display resolution of 1920 x 1080 pixels. This means users can expect sharp and clear images on the 90" screen.

Is the display technology of the Sharp PN-R903A LED?

Yes, the Sharp PN-R903A uses LED technology, which typically provides energy-efficient performance and vibrant colors.

What is the display brightness of the Sharp PN-R903A?

The Sharp PN-R903A has a display brightness of 700 cd/m², which is considered quite high compared to other monitors, ensuring a bright and vivid viewing experience.

What is the typical contrast ratio of the Sharp PN-R903A?

The Sharp PN-R903A has a contrast ratio of 4000:1, which indicates good differentiation between dark and light colors on the screen.

Does the Sharp PN-R903A come with Ethernet LAN connectivity?

Yes, the Sharp PN-R903A is equipped with Ethernet LAN connectivity, allowing for easy network connection and access to online content or resources.

How can I troubleshoot issues with selecting the display method (PIP/PbyP) on the Sharp PN-R903A monitor?

To troubleshoot issues with selecting the display method (PIP/PbyP) on the Sharp PN-R903A monitor, follow these steps: 1. Access the MULTI/PIP menu on the monitor. 2. Navigate to the PIP/PbyP settings within the menu. 3. Select the desired display method: PIP, PbyP, or PbyP2. 4. Adjust the PIP size, horizontal position (H-POS), vertical position (V-POS), and blending as needed. 5. Choose the input signal source for the sub screen in PIP mode. 6. Set the sound output for the main and sub screens in PIP, PbyP, or PbyP2 mode. 7. Configure the position of the main screen in PbyP or PbyP2 mode. 8. Set the display method for when no signals are input in PIP, PbyP, or PbyP2 mode to either MANUAL or AUTO. These steps should help you troubleshoot and customize the display method on your Sharp PN-R903A monitor.

How can I adjust the date and time settings on the Sharp PN-R903A monitor?

To adjust the date and time settings on the Sharp PN-R903A monitor, follow these steps: 1. Press the up or down arrow buttons to select the date and time on the date/time setting screen. 2. Use the left or right arrow buttons to change the numerical values for the date and time. 3. Press the ENTER button to confirm the date and time settings. 4. Ensure that the date is set in "Month/Day/Year" order and the time is set on a 12-hour basis. 5. Note that the clock is maintained by the internal battery. 6. If the date/time setting screen appears when turning on the monitor, the internal battery may need replacement after about 5 years. 7. Contact an authorized SHARP servicing dealer for assistance with battery replacement if needed.

How can I troubleshoot issues with the enlarge function on the Sharp PN-R903A monitor?

To troubleshoot issues with the enlarge function on the Sharp PN-R903A monitor, follow these steps: 1. Ensure that the "Enlarge" setting is turned on in the MULTI menu. 2. Select "ADVANCED (ENLARGE)" in the menu. 3. Set the number of monitors aligned horizontally and vertically in the ENLARGE H and ENLARGE V settings. 4. Configure the section of the separated image to be displayed on each monitor in the ENLARGE-POS setting by selecting the position using the navigation buttons. 5. If black bands appear around the screen when connecting a laptop computer with specific resolutions, enable the ZOOM2 SPECIAL SETTING in the OTHERS menu and select ZOOM2 in the SIZE setting to display the area inside the black band. These steps should help you troubleshoot any issues with the enlarge function on your Sharp PN-R903A monitor.

How can I troubleshoot issues with the sound output settings in PIP/PbyP modes on the monitor?

To troubleshoot sound output settings in PIP/PbyP modes on the Sharp PN-R903A monitor, follow these steps: 1. Access the "MULTI/PIP" menu on the monitor. 2. Navigate to the "SOUND CHANGE" option in the menu. 3. Adjust the sound settings to specify the sound output for PIP, PbyP, or PbyP2 modes. 4. Ensure that the main screen sound is output correctly, even when specifying sound for the sub screen. 5. If needed, adjust the position of the main screen in PbyP or PbyP2 mode using the "MAIN POS" setting. 6. Similarly, adjust the position of the sub screen in PbyP2 mode using the "PbyP2 POS" setting. 7. Check the "AUTO OFF" setting to determine the display method when no signals are input for the sub screen in PIP, PbyP, or PbyP2 modes. These steps will help you troubleshoot and optimize the sound output settings in PIP/PbyP modes on your Sharp PN-R903A monitor.

Is the manual of the Sharp PN-R903A available in English?

Yes, the manual of the Sharp PN-R903A is available in English .

Is your question not listed? Ask your question here

No results