Shark Rocket IX141 manual

Shark Rocket IX141
8.5 · 2
PDF manual
 · 11 pages
English
manualShark Rocket IX141

Cordless Vacuum

IX140 Series
IZ140 Series

OWNER’S GUIDE

ROCKET®

View the manual for the Shark Rocket IX141 here, for free. This manual comes under the category vacuum cleaners and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Shark Rocket IX141 or do you need help? Ask your question here

Need help?

Do you have a question about the Shark and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 41
J
Jennette NovakFebruary 13, 2023

Those little black wheels on the bottom of the power head. I included a picture and I highlighted the little wheel there's one on each side but I only took a picture of the one side. How do you get them in and out without ruining them??

Those little black wheels on the bottom of the power head. I included a picture and I highlighted the little wheel there's on...
zoom-in
View photo
2 comments
E
Emma of manua.lsDecember 19, 2023

To install and remove the small black wheels on the bottom of the power head of the Shark Rocket IX141 vacuum cleaner without causing damage, follow these steps: 1. Turn off the vacuum cleaner. 2. Using a coin, turn the locks counterclockwise to open and lift off the cover to access the brushroll. 3. Clear any blockages in the airway. 4. Replace the cover by sliding the inserts into the slots and pressing down firmly on all sides. 5. Turn the locks clockwise to close. You will hear an audible click once the locks are secured.

This answer is automatically generated
K
Kellye CooperFebruary 24, 2023

Jeanette did you get an answer? I’m trying to figure out the same thing. Hair all wound up around the little wheels.

K
Karen Hartford April 24, 2023

Hi, I dropped mine and the latch for the empty cup popped off.I have the latch and the spring but I can’t figure out how to put it back together. Any help would be appreciated…I can’t figure out the spring mechanism.

Hi, I dropped mine and the latch for the empty cup popped off.I have the latch and the spring but I can’t figure out how to p...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

To reassemble the latch and spring on your Shark Rocket IX141 vacuum cleaner, please follow these steps: 1. Make sure the vacuum cleaner is turned off and unplugged for safety. 2. Find the empty container where the latch and spring mechanism are located. 3. Take the latch and align it with the corresponding slots on the empty container. 4. Insert the latch into the slots and ensure that it is securely in place. 5. Take the spring and position it over the latch, making sure it is properly aligned. 6. Apply gentle pressure to compress the spring and attach it to the latch. 7. Double-check that the latch and spring are securely attached and functioning properly. 8. Once everything is in place, you can test the latch by opening and closing the empty container to ensure it locks and releases correctly.

This answer is automatically generated
R
Rebecca CookSeptember 4, 2023

What does it mean when the left and far right battery lights are blinking when plugged in (middle light is not blinking)?

What does it mean when the left and far right battery lights are blinking when plugged in (middle light is not blinking)?
zoom-in
View photo
3 comments
E
Emma of manua.lsDecember 19, 2023

When the left and far right battery lights are blinking on the Shark Rocket IX141 vacuum cleaner while it is plugged in and the middle light is not blinking, it indicates that there is an issue with the battery. Here are the steps to troubleshoot this issue: 1. Check the battery level: If the bottom LED light is flashing, it means that the battery needs to be charged. Plug in the vacuum cleaner and allow it to charge until the battery is fully charged. 2. Check the battery temperature: If both the top and bottom LED lights are flashing, it indicates that the battery temperature is not optimal, and charging is temporarily paused. Leave the battery plugged in, and charging will resume once the temperature is within the acceptable range.

This answer is automatically generated
R
RussSeptember 25, 2023

It is still warm from running it, let it cool down awhile then plug in.

J
Judy ServossNovember 15, 2023

How do I remove the dust collection box?

How do I remove the dust collection box?
zoom-in
View photo
C
Christine osborne December 12, 2023

First issue, my vacuum will not switch from floor to carpet when I change it and it doesn’t suck up anything very good and after a few seconds of using it the green light turns red, second issue is when I turn it off it doesn’t turn off right away the brush still spins and it’s on for almost a minute or until I plug it in. I have taken the whole thing apart and cleaned every inch of it that I could.

First issue, my vacuum will not switch from floor to carpet when I change it and it doesn’t suck up anything very good and af...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To solve the first problem with your Shark Rocket IX141 vacuum cleaner not switching from floor to carpet and not suctioning well, as well as the green light turning red after a few seconds of use, please follow these steps: 1. Turn off the vacuum cleaner. 2. Use a coin to turn the locks counterclockwise and open the cover to access the brushroll. 3. Check for any blockages in the airway and clear them if necessary. 4. Replace the cover by sliding the inserts into the slots and pressing down firmly on all sides before turning the locks clockwise to close. You should hear an audible click once the locks are secured. To address the second issue of the brush still spinning and the vacuum not turning off right away when you switch it off, please try the following: 1. Turn off the vacuum cleaner. 2. Remove the handheld vacuum from the wand. 3. Check all intake openings to the dust cup and remove any debris or blockages. 4. Check the connection between the handheld vacuum and the wand for any blockages and clear them if necessary. 5. Check the clog access in the wand and clear any debris. 6. If the floor nozzle has headlights and they are not illuminated, there may be a connection issue between the handheld vacuum, wand, and nozzle. Try disconnecting and reattaching the pieces.

This answer is automatically generated
J
Julia WilkinsonFebruary 4, 2023

My vacuum is spinning in the wrong direction, causing the dust and dirt to fly out. How do I fix this?

A
AudreyJuly 14, 2023

My shark battery has 2 lights, on the left and right, that are blinking when I plug it in. Is it something I can fix? My model is ix141, thank you!

N
NatalieJanuary 28, 2024

I am charging it. The first and third lights are blinking while it’s charging. It’s never done that before.

S
SuzMay 8, 2024

Stopped running while in use. When looking at it, the light on the left is blinking, and the other two are dark.

The Shark Rocket IX141 is a vacuum cleaner that offers powerful suction and versatile cleaning capabilities. It is designed for use in the United States and comes with a range of features that make it a popular choice among consumers. One of the key features of the Shark Rocket IX141 is its lightweight and compact design. This makes it easy to maneuver and carry around the house, allowing for cleaning in hard-to-reach areas and on stairs. The vacuum cleaner also comes with a swivel steering feature, which further enhances its maneuverability. In terms of performance, the Shark Rocket IX141 is equipped with a powerful motor that provides strong suction. This allows for effective cleaning on both carpets and hard floors. The vacuum cleaner also comes with a self-cleaning brushroll, which helps to remove hair and pet hair from the brushroll automatically, saving time and effort for the user. The Shark Rocket IX141 also offers versatile cleaning options with its multiple attachments. It comes with a crevice tool, a dusting brush, and an upholstery tool, allowing for targeted cleaning on different surfaces and areas of the home. Additionally, the vacuum cleaner has a large dust cup capacity, reducing the need for frequent emptying. Overall, the Shark Rocket IX141 is a reliable and efficient vacuum cleaner that offers powerful suction, versatile cleaning options, and convenient features. Its lightweight design and maneuverability make it a convenient choice for everyday cleaning tasks.

General
BrandShark
ModelRocket IX141
Productvacuum cleaner
EAN0622356559935
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Shark Rocket IX141 below.

My Shark vacuum is losing suction. Why is that?

Your Shark vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged

How often should I check the filter?

A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.

What do I do with a smelly vacuum cleaner?

A commonly used method is to put a little washing powder in the dust container or the dust bag.

How often should I vacuum my house?

For allergy sufferers, vacuuming the house at least twice a week is recommended.

How do I assemble my Shark Rocket IX141 vacuum cleaner?

Begin by attaching the handle to the main body of the vacuum cleaner. Next, connect the hose securely to the front of the vacuum. Finally, attach the desired cleaning accessory to the end of the hose, ensuring a proper fit.

How do I properly clean the filters of my Shark Rocket IX141?

Start by unplugging the vacuum cleaner and removing the dust cup. Take out the foam and felt filters and rinse them under cold water until the water runs clear. Allow the filters to air dry completely before reinserting them back into the vacuum.

How do I adjust the suction power of my Shark Rocket IX141?

To adjust the suction power, locate the suction control dial located on the front of the vacuum near the base. Turn the dial clockwise to increase suction or counterclockwise to decrease suction, depending on your cleaning needs.

How do I handle blockages or clogs in my Shark Rocket IX141?

In case of a blockage or clog, start by turning off and unplugging the vacuum cleaner. Check the hose, cleaning nozzle, and brush roll for any debris or obstructions. Carefully remove the blockage using your fingers or a suitable tool. Once cleared, reassemble the vacuum and continue cleaning.

How do I maintain the brush roll of my Shark Rocket IX141?

Regular maintenance of the brush roll is essential for optimal performance. Ensure the vacuum is unplugged, then remove the brush roll cover. Use scissors or a suitable tool to cut away any hair, fibers, or debris that may have tangled around the brush roll. After cleaning, securely reattach the brush roll cover.

Is the manual of the Shark Rocket IX141 available in English?

Yes, the manual of the Shark Rocket IX141 is available in English .

Is your question not listed? Ask your question here

No results