Shark DuoClean Powered Lift-Away NZ801UKT manual

Shark DuoClean Powered Lift-Away NZ801UKT
  • Number of pages: 2
  • Filetype: PDF
For questions or to register your product, contact us at
0800 862 0453 or visit us online at
©2019 SharkNinja Operating LLC. All rights reserved.
Made in China. SHARK and DUOCLEAN are registered trademarks of SharkNinja Operating LLC.
LI FT-AWAY and POWERED LIFT-AWAYare trademarks of SharkNinja Operating LLC.




Please be sure to read the enclosed Shark instructions prior to using your vacuum
Use this Quick Start Guide
to start using your new
vacuum’s great features.
Register your vacuum at


Access brushroll and Soft Roller
1. Use a coin to unlock the 3 locks on the
bottom of the floor nozzle, a portion of
the base is removable to allow for better
access to the brush roll and exposure to
the airway. Shine a torch from the bottom
to check for possible blockage in the
2. Clear away any objects or debris.
To reassemble, replace base by
lining it up along the front of the
nozzle. Push down to snap into
place. Lock the 3 locks.


Empty dust cup after each use
Wash filters to keep the
suction strong.
Rinse filters and allow to air-dry
completely. Tap loose dirt
from foam filters as needed
between washes.
See enclosed instructions for
complete details on removing
and cleaning filters.
Brushroll Maintenance
Carefully remove any debris that may be
impeding the brushroll.
Soft Roller Maintenance
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.





Checking the Nozzle for Blockages
Tilt neck of nozzle back to straighten the
airway, then remove any blockages.
Shark DuoClean Powered Lift-Away NZ801UKT

Need help?

Number of questions: 13

Do you have a question about the Shark DuoClean Powered Lift-Away NZ801UKT or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Shark DuoClean Powered Lift-Away NZ801UKT owners to properly answer your question.

Margaret Martin, 9-8-2021 14:56:05 No comments

I have shark NV801UK and I’ve cleaned hepa filter does the black sponge go in first or second

I have shark NV801UK and I’ve cleaned hepa filter does the black sponge go in first or second
Answer this question
Joe Neilson, 20-8-2021 11:54:31 No comments

The rollers do not turn

Answer this question
Andy, 7-8-2021 10:30:15 No comments

Roller light goes red for a second then off, roller not turning

Answer this question
Catherine Sontag, 1-6-2021 00:29:54 No comments

What would prevent the roller from moving

Answer this question
Carol, 27-4-2021 08:03:16 No comments

Hiw do I clear a blockage in the tube at the bottom of cleaner just above the rotating brush?

Answer this question
Dorothy Armitage, 5-4-2021 10:32:34 No comments

Red light comes on when on carpet suction green light stays on green on hard surface

Answer this question
Stephen Latham, 1-4-2021 10:22:27 No comments

Why does this model deposit streaks of dust/hair on the carpet parallel to movement as you move it backwards and forwards? I've 1) cleaned the filter (is there a second one?) 2) emptied the dust container and 2) checked both the rotating brushes are rotating. 4) The suction is so strong it even picks up the carpet so there's no blockage, yet it still deposit streaks of debris(hair/dust) on the carpet. Is this an inherent feature of this model? Why is everyone not complaining about this? It's been a problem for a year now and started within months after buying it.

Answer this question
GM Crowle, 1-2-2021 17:07:28 No comments

what do I do when the brush roll indicator light comes on?

Answer this question
Emma, 20-1-2021 10:32:49 No comments

Brand new used for first time this morning. Suction hardly there. Adjusted to maximum. Any suggestions please? Thanks

Answer this question
Denise, 23-12-2020 13:56:34 No comments

Where is the hepa filter pls on NZ801UKT

Answer this question

View the manual for the Shark DuoClean Powered Lift-Away NZ801UKT here, for free. This manual comes under the category Vacuum Cleaners and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Shark DuoClean Powered Lift-Away NZ801UKT or do you need help? Ask your question here

Shark DuoClean Powered Lift-Away NZ801UKT specifications

Brand Shark
Model DuoClean Powered Lift-Away NZ801UKT
Product Vacuum Cleaner
EAN 0622356231398
Language English
Filetype PDF
Maximum input power 750 W
Annual energy consumption - kWh
Power source AC
Dust container full indicator -
Cord length 8 m
Type Cylinder vacuum
Cleaning type Dry
Dust container type Bagless
Dust capacity 0.83 L
Product colour Navy,Orange
Tube type Flexible
Flexible hose
Number of wheels 2 wheel(s)
Vacuum air filtering Air-clean
Dirt separating method Cyclonic/filtering
Washable filter
Proper use Home
Cleaning surfaces Carpet,Hard floor
Noise level - dB
Animal care
Weight & dimensions
Width 260 mm
Depth 300 mm
Height 1170 mm
Weight 6500 g
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Shark DuoClean Powered Lift-Away NZ801UKT.

Is your question not listed? Ask your question here