Sevenoak SK-PSC1 manual

Sevenoak SK-PSC1
8.7 · 1
PDF manual
 · 1 page
manualSevenoak SK-PSC1
Please read and follow these instructions, and keep this manual in
a safe place.
Handle the unit with care.
Clean the unit with a soft, dry cloth.
Use only parts provided by the manufacturer.
Make sure everything is secure before proceeding.
Make sure the item is intact and that there are no missing parts.
Do not exceed the maximum load capacity.
All photos are for illustrative purposes only.


Step 2:
Insert your phone to the holder, press the cold shoe mount and
meanwhile turn the locking screw clockwise to lock the holder
tightly to ensure the phone is secured. It is ready to use now.
1. Mount an external microphone (with cold shoe mount) onto
the cold shoe mount on SK-PSC1, lock the microphone tightly.
Microphone is sold separately

Optional: Use SK-PSC1 with other accessories

Limited One-year Warranty


Smart Grip

2016 Sevenoak lnc.Visit us on the
web at
2016 Sevenoak lnc.Visit us on the
web at
Adjustable height for dierent phone sizes
Step 1:
Press the cold shoe mount, meanwhile turn the locking screw
counter clockwise till the height is suitable for your phone.

Start To Use:

Locking screw
1. Product over all height: 12.9cm
2. Max height of the phone holder part: 9.7cm
3. Min height of the phone holder part: 5.7cm
4. Made by plastic and aluminum
5. Net weight: 164g
Small, compact, easy to use and carry
Adjustable height
Holds your device tightly
An ultimate tool for serious smartphone photography
Compatible with virtually any smartphone model
Can be used as a Tripod Mount, Filmmaker Grip, and
Traveler Stand
Made for avid smartphone photographers, filmmakers,
journalists, sporters and travelers




1. Main Body
2. Hand strap
3. Hand grip
4. Bubble level
5. Cable fix slot
6. Cold shoe mount
7. 1/4” screw thread
8. 1/4” screw thread
9. 1/4” screw thread
2. Mount SK-PSC1 to a tripod with the built in 1/4 screw
thread at the bottom of the hand grip.
Microphone is
sold separately
Microphone is sold separately
Microphone is sold separately
Tripod is sold separately
Tripod is sold separately
5. Mount LED light (with cold shoe mount ) onto the cold
shoe mount on SK-PSC1, lock the LED light tightly
LED light is sold separately
Remove the hand grip, SK-PSC1 can be used as a stand for your
phone which can be stand vertically or put down as shown in
the below picture.

Use SK-PSC1 as a stand

Sevenoak provides a limited warranty that this product is
free from defects in materials and workmanship to the
original purchaser under normal use for a period of one (1)
year from the original purchase date or thirty (30) days
after replaceme nt (the “Warranty Period”), whichever
occurs later. Our respon sibility with respect to this limited
warranty shall be limited solely to repair or replacement, at
its option, of any product which fails during normal
consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to
Seller the defective product along with proof of purchase
and the RMA number.
This warranty does not extend to damage or failure which results
from misuse, neglect, accident, alternation,abuse, improper
installation or maintenance. Except as provided herein, sevenoak
makes neither any express warranties nor any implied warranties,
including but not limited to any implied warranty of merchantability
or fitness for a particular purpose. This warranty provides you with
specific legal rights, and you may also have additional rights which
vary from state to state.
6. Remove the hand grip, SK-PSC1 can be mounted onto the
tripod with the built in 1/4” screw at the bottom of the
phone holder.
7. With 1/4” screw thread built at the back, SK-PSC1 can
be mounted onto other stands as shown in below figture
to use your phone to a take a short video or use it as a live
view monitor for your video shooting.
Shoulder rig or other
stands (sold separately)

View the manual for the Sevenoak SK-PSC1 here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Sevenoak SK-PSC1 or do you need help? Ask your question here

Need help?

Do you have a question about the Sevenoak and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sevenoak owners to provide you with a good answer.

Number of questions: 0

Gas piston design allows 130mm of smooth, precise height adjustment so your display is always in the most comfortable po...
Not categorized
User manual (PDF)
Mobile device typeMobile phone/Smartphone
Proper useHand
TypeActive holder
Product colourBlack
MaterialAluminium, Plastic
Device mount typeClamp mount
CompatibilityiPhone 6, 6 Plus, 6S, 6S Plus, 7, 7 Plus\nSamsung Galaxy, Sony Xperia, Nokia Lumia, Nexus
Built-in charger
Weight & dimensions
Weight164 g
Height129 mm
Packaging data
Quantity per pack1 pc(s)
Height adjustment
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sevenoak SK-PSC1 below.

Is your question not listed? Ask your question here

No results