Sennheiser MB Pro 2 manual

Sennheiser MB Pro 2
8.5 · 8
PDF manual
 · 30 pages
English
manualSennheiser MB Pro 2
20 | MB Pro1 | MB Pro 2
Using the headset

Restoring factory default settings (Reset)

1. Switch the headset off (see page 14).
2. Keep the multi-function button pressed until the LED alternately flashes blue
and red.
3. Simultaneously press and hold the headset‘s multi-function button and Audio
button for 5 seconds.
The LED flashes 3 times purple and then alternately blue and red. The headset
tries to pair with Bluetooth devices (see page 11).
5 s
3x
6s
OFF

If you are out of the Bluetooth transmission range

Calling is only possible in the Bluetooth transmission range of the mobile phone/
Bluetooth device. The transmission range largely depends on environmental con-
ditions such as wall thickness, wall composition etc. With a free line of sight, the
transmission range of most mobile phones and Bluetooth devices is up to 10
meters.
If the headset leaves the transmission range of the connected Bluetooth device
during a call, one of the following voice prompts is announced in the headset:
“Phone one disconnected” for the first mobile phone
“Phone two disconnected” for the second mobile phone or
“Dongle disconnected” for the Bluetooth dongle.
If you re-enter the Bluetooth transmission range within these 5 minutes, the con-
nection is re-established and the voice prompt “Phone one connected”, “Phone
two connected” or “Dongle connected” is announced in the headset.
If you spend more than 5 minutes outside the Bluetooth transmission range, the
connection breaks down completely and you have to manually re-establish the
connection. To re-establish a connection to the mobile phone or/and Bluetooth
dongle:
X Briefly press the multi-function button.
Once the connection is successfully re-established, one of the following voice
prompts is announced in the headset:
“Phone one connected” for the first mobile phone
“Phone two connected” for the second mobile phone or
“Dongle connected” for the Bluetooth dongle.
1. ”power on“
2. „... connected“

Manual

View the manual for the Sennheiser MB Pro 2 here, for free. This manual comes under the category Headphones and has been rated by 8 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Sennheiser MB Pro 2 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser MB Pro 2 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sennheiser MB Pro 2 owners to provide you with a good answer.

Colin • 16-4-2021 No comments

I cannot find any downloads for the MB Pro 2 which has recently stopped working after bing great for a long time. Is there anywhere I can update firmware?

Answer this question
LUIS • 4-4-2021 No comments

CÓMO PONER LOS AURICULARES EN IDIOMA ESPAÑOL?

Answer this question

Number of questions: 2

Sennheiser MB Pro 2 specifications

Below you will find the product specifications and the manual specifications of the Sennheiser MB Pro 2.

General
Brand Sennheiser
Model MB Pro 2
Product Headphone
Language English
Filetype Usermanual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser MB Pro 2 below.

Is your question not listed? Ask your question here

No results