XDial the desired number on your mobile phone or softphone.
You hear a beep in the headset.
If your mobile phone does not automatically transfer the call to the headset:
XPress the multi-function button on the headset or press a corresponding button
on your mobile phone (see the instruction manual of your mobile phone).
Accepting/rejecting/ending a call
When you receive a call, the headset announces which of the connected Blue-
tooth device is ringing:
• connected mobile phones: “Phone one” or “Phone two” or
• Bluetooth dongles connected to the PC: “Dongle“
You then hear a ring tone in the headset and the LED flashes blue. If the headset
battery is low, the LED flashes red.
XPress the multi-function button:
DurationFunctionVoice prompt/beeps
Accepts a call
1 s
Rejects a call”Call rejected”
2 x
Puts an active call on hold
(pause)
–
Ends a call”Call ended”
To accept a call while the headset is being charged:
XTake the headset from the magnetic holder of the charging cable. The headset
switches on and the call is automatically accepted.
XPlace the headset back into the magnetic holder to end the call and to con-
tinue charging the rechargeable battery.
To accept a call when the headset is switched off:
XSimply switch your headset on.
When the voice prompts are disabled, you hear a beep in the headset.
When you listen to music, the music is paused until you end the call. This function
is not supported by all mobile phones.
Phone
one
View the manual for the Sennheiser MB Pro 1 here, for free. This manual comes under the category Headphones and has been rated by 3 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Sennheiser MB Pro 1 or do you need help? Ask your question here
Do you have a question about the Sennheiser and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sennheiser owners to provide you with a good answer.
Ingrid • 8-9-2020No comments
the BTD usb is broken. Can I use another instead? e.g logi link BT0015 usb dapter 4.0.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser MB Pro 1 below.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can I make hands-free calls with my Headphone?
The newer Headphones generally have a small microphone built in which allows for calling.
What is noise cancelling?
Noise cancelling ensures that ambient noise is reduced.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
Is the manual of the Sennheiser MB Pro 1 available in English?
Yes, the manual of the Sennheiser MB Pro 1 is available in English .
Need help?
Do you have a question about the Sennheiser and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sennheiser owners to provide you with a good answer.
the BTD usb is broken. Can I use another instead? e.g logi link BT0015 usb dapter 4.0.
Number of questions: 1