Sennheiser MB Pro 1 manual

Sennheiser MB Pro 1
7.1 · 3
PDF manual
 · 30 pages
manualSennheiser MB Pro 1
14 | MB Pro1 | MB Pro 2
Using the headset

Switching the headset on and connecting it

X Press the multi-function button for 2 seconds or take the headset from the
magnetic holder or the charging cable.
The voice prompt “Power on” is announced in the headset. The LED flashes 3
times blue every 2 seconds until the headset finds a paired Bluetooth device
to connect to. Once the connection is successfully established, one or two of
the following voice prompts are announced in the headset:
“Phone one connected” for the first mobile phone
“Phone two connected” for the second mobile phone or
“Dongle connected” for the Bluetooth dongle.
1. ”power on“
2. „... connected“
Only two out of the maximum eight paired Bluetooth devices can be simultane-
ously connected to the headset (“paired + connected”).
After switch-on, the headset automatically tries to connect to the two last con-
nected Bluetooth devices.

Switching the headset off

X Press the multi-function button for 2 seconds.
The voice prompt “Power off” is announced in the headset and the LED flashes
red 3 times. The headset ends the call and switches off.
”power off“
If the headset has not been used for more than 30 minutes and no devices
are connected, the headset automatically switches off to conserve battery
paired +

View the manual for the Sennheiser MB Pro 1 here, for free. This manual comes under the category Headphones and has been rated by 3 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Sennheiser MB Pro 1 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sennheiser owners to provide you with a good answer.

Ingrid • 8-9-2020No comments

the BTD usb is broken. Can I use another instead? e.g logi link BT0015 usb dapter 4.0.

Answer this question

Number of questions: 1

MB Pro 1
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser MB Pro 1 below.

Is your question not listed? Ask your question here

No results