Name: Sennheiser MB Pro 1
Brand: Sennheiser
SKU: 277606
Rating: 71 (3 reviews)

manualSennheiser MB Pro 1

10 | MB Pro1 | MB Pro 2

Putting the headset into operation

Charging the headset battery

A complete charging cycle takes about 2 hours and 30 minutes. Before using

the headset for the first time, charge the rechargeable battery for a complete

charging cycle without interruption.

1. Take off the headset and switch it off (see page 14).

2. Place the headset into the magnetic holder of the headset charger.

3. Connect the USB plug of the charging cable to the USB socket of your com-

puter, the corresponding USB car charger (optional accessory) or power supply

unit (optional accessory).

4. The battery is being charged. The LED flashes depending on the battery charge

level. After 30 seconds, the LED goes off. Press the multi-function button to

check the battery charge level. When the battery is fully charged, the LED

lights up blue constantly.

1 2

3 4

not included

below 1 hour talk time

1 to 2 hours talk time

2 to 4 hours talk time

4 to 10 hours talk time

above 10 hours talk time

LED flashes

Meaning

100 %

OFF

When the battery charge level drops below 15 minutes of talk time, the LED

flashes red and the voice prompt “Recharge headset” is announced several

times. When the battery is flat, the headset switches off automatically.

2:30 h

15 h

0:40 h

7.5 h

View the manual for the Sennheiser MB Pro 1 here, for free. This manual comes under the category Headphones and has been rated by 3 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Sennheiser MB Pro 1 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sennheiser owners to provide you with a good answer.

Ingrid • 8-9-2020No comments

the BTD usb is broken. Can I use another instead? e.g logi link BT0015 usb dapter 4.0.

Answer this question

Number of questions: 1