Sennheiser HME 26-II-100 manual

Sennheiser HME 26-II-100
5.4 · 1
PDF manual
 · 31 pages
English
manualSennheiser HME 26-II-100
Care and maintenance
12

Care and maintenance

Cleaning and maintaining the headset
Only use a soft, dry cloth to clean the product.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads
annually.
Grasp the edge of the ear pad and pull sharply.
Attach the new ear pad to the ear cup by pressing firmly
around the ear pad until you hear all 12 latches lock into
place.
CAUTION
Liquids can damage the product!
Liquids entering the product can short-circuit the electronics
or damage the mechanics. Solvents or cleansing agents can
damage the surface of the product.
Keep all liquids far away from the product.

Manual

View the manual for the Sennheiser HME 26-II-100 here, for free. This manual comes under the category headset and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Sennheiser HME 26-II-100 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Sennheiser HME 26-II-100 specifications

Below you will find the product specifications and the manual specifications of the Sennheiser HME 26-II-100.

General
BrandSennheiser
ModelHME 26-II-100 | 505779
Productheadset
EAN0615104246331, 4044155087659
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
Product colorBlack
Sound pressure level (max)150 dB
Recommended usageStage/Studio
Headset typeBinaural
Wearing styleHead-band
Product typeHeadset
Country of originGermany
Headphones
Impedance100 Ω
Ear couplingSupraaural
Headphone frequency40 - 18000 Hz
Maximum input power200 mW
Microphone
Microphone frequency40 - 20000 Hz
-
Microphone input impedance300 Ω
Microphone typeBoom
Weight & dimensions
Weight205 g
Height- mm
Width- mm
Depth- mm
Operational conditions
Storage temperature (T-T)-55 - 70 °C
Operating temperature (T-T)-15 - 55 °C
Other features
Output voltage0.004 V
ManualYes
Sound pressure level (nominal)105 dB
Operation voltage range5 - 15 V
2.5 mm connectorNo
Ports & interfaces
Connectivity technologyWired
3.5 mm connectorYes
USB connectivityNo
Bluetooth-
Design
Headband pressure3.9 N
Logistics data
Master (outer) case height410 mm
Master (outer) case width266 mm
Master (outer) case weight6677.84 g
Master (outer) case length526 mm
Quantity per master (outer) case12 pc(s)
Shipping (inner) case weight480.4 g
Harmonized System (HS) code85183000
Packaging data
Package depth185 mm
Package height84 mm
Package width245 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser HME 26-II-100 below.

Can I make hands-free calls with my headset?

The newer headset generally have a small microphone built in which allows for calling.

What is noise cancelling?

Noise cancelling ensures that ambient noise is reduced.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

What is the weight of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a weight of 205 g.

What is the height of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a height of - mm.

What is the width of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a width of - mm.

What is the depth of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a depth of - mm.

Is the manual of the Sennheiser HME 26-II-100 available in English?

Yes, the manual of the Sennheiser HME 26-II-100 is available in English .

Is your question not listed? Ask your question here

No results