Sennheiser HME 26-II-100 manual

Sennheiser HME 26-II-100
5.4 · 1
PDF manual
 · 31 pages
English
manualSennheiser HME 26-II-100

FEATURES

Lightweight with extra soft cushions for
excellent wearing comfort
Headphone with very accurate sound re-
production for professional applications
Pre-polarized condenser microphone for
audio transmission with highest intelli-
gibility, can either be worn right or left
hand side
ActiveGard™ (on/off switch) for
protected hearing
Reliable performance over long lifetime
for safe investments
Swivelling ear cap for single sided
listening
Modular concept of boom, cable and
cushions for highest flexibility

ARCHITECT’S

SPECIFICATIONS

A broadcast headset has to be provided with a
pre-polarized condenser microphone with car-
diod pattern. The microphone is especially pro-
tected against hum. The flexible boom allows
individual right positioning of microphone and
can be worn on either right or left hand side.
The headphones have a high maximum sound
pressure level. The ActiveGard™ limiter techno-
logy protects hearing from volume peaks above
105 dB and can be activated or deactivated.
The swivelling ear cap allows listening to the
environment whenever needed. The headset is
light weighted, provides expandable split head-
band and extra soft ear cushions and headband
paddings for outstanding wearing comfort
even during long production days. Following
the modular concept, ear cushions, paddings
and cable can be replaced easily. The modular
set-up of the 26-II family permits different
variants of cables and connectors. Correspon-
ding cable-II family is copper material reinforced
with Kevlar® for highest durability. The special
shape with short coiled part absorbs born noise
coming from cable perfectly.
The HME 26-II applies to the requirements of most demanding broadcast
applications for TV or Radio. The pre-polarized condenser microphone has an
excellent feedback rejection and features brilliant acoustic performance for
audio transmission in highest broadcast quality.
The closed, supra-aural headphones
have a very good passive noise
attenuation and a high maximum
SPL and are equipped with ActiveGard™.
This limiter can be activated or
deactivated.

TECHNICAL DATA

HEADPHONES
Transducer principle .............................................. dynamic, closed
Ear coupling ............................................................supra-aural
Frequency response ...............................................20...18,000 Hz
Impedance ...............................................................100 stereo HME 26-II-100
................................................................................... 600 HME 26-II-600
Characteristic SPL ...................................................105 dB SPL at 1 kHz, 1 mW
...................................................................................115 dB SPL at 1 kHz, 1 V
Maximum SPL ........................................................ActiveGard™ switched on:
105 dB SPL at 1 kHz
ActiveGard™ switched off:
128 dB SPL at 1 kHz, 200 mW
Passive noise attenuation ....................................approx. 18 dB
Distortion.................................................................< 0,5% at 1 kHz)
Contact pressure ....................................................approx. 3.9 N
MICROPHONE
Type .......................................................................... BKE 4-4/BKE 4-2
Transducer principle ............................................. pre-polarized condenser micro-
phone, cardioid pick-up pattern
Frequency response ...............................................40...20,000 Hz
Maximum SPL .........................................................150 dB at 1 kHz, 0.5 % THD
Output voltage .......................................................4 mV/Pa +/- 2,5 dB
Terminating impedance ........................................min. 4.7 k
Supply voltage ........................................................5-15V DC
Continued on page 2

HME 26-II

Broadcast Headset with pre-polarized

Condenser Microphone.

Manual

View the manual for the Sennheiser HME 26-II-100 here, for free. This manual comes under the category headset and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Sennheiser HME 26-II-100 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Sennheiser HME 26-II-100 specifications

Below you will find the product specifications and the manual specifications of the Sennheiser HME 26-II-100.

General
BrandSennheiser
ModelHME 26-II-100 | 505779
Productheadset
EAN0615104246331, 4044155087659
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
Product colorBlack
Sound pressure level (max)150 dB
Recommended usageStage/Studio
Headset typeBinaural
Wearing styleHead-band
Product typeHeadset
Country of originGermany
Headphones
Impedance100 Ω
Ear couplingSupraaural
Headphone frequency40 - 18000 Hz
Maximum input power200 mW
Microphone
Microphone frequency40 - 20000 Hz
-
Microphone input impedance300 Ω
Microphone typeBoom
Weight & dimensions
Weight205 g
Height- mm
Width- mm
Depth- mm
Operational conditions
Storage temperature (T-T)-55 - 70 °C
Operating temperature (T-T)-15 - 55 °C
Other features
Output voltage0.004 V
ManualYes
Sound pressure level (nominal)105 dB
Operation voltage range5 - 15 V
2.5 mm connectorNo
Ports & interfaces
Connectivity technologyWired
3.5 mm connectorYes
USB connectivityNo
Bluetooth-
Design
Headband pressure3.9 N
Logistics data
Master (outer) case height410 mm
Master (outer) case width266 mm
Master (outer) case weight6677.84 g
Master (outer) case length526 mm
Quantity per master (outer) case12 pc(s)
Shipping (inner) case weight480.4 g
Harmonized System (HS) code85183000
Packaging data
Package depth185 mm
Package height84 mm
Package width245 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser HME 26-II-100 below.

Can I make hands-free calls with my headset?

The newer headset generally have a small microphone built in which allows for calling.

What is noise cancelling?

Noise cancelling ensures that ambient noise is reduced.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

What is the weight of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a weight of 205 g.

What is the height of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a height of - mm.

What is the width of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a width of - mm.

What is the depth of the Sennheiser HME 26-II-100?

The Sennheiser HME 26-II-100 has a depth of - mm.

Is the manual of the Sennheiser HME 26-II-100 available in English?

Yes, the manual of the Sennheiser HME 26-II-100 is available in English .

Is your question not listed? Ask your question here

No results