Sennheiser HDA 200 manual

Sennheiser HDA 200
6.8 · 1
PDF manual
 · 1 page
English
manualSennheiser HDA 200

HDA 200 Audiometric Headphone

Closed dynamic headphones designed for extended high frequency testing.

Features
Excellent passive attenuation (based on Peltor
TM
Ear Defenders)
Very high quality sound reproduction
Convenient single sided cable
Padded headband and additional adjustable/removable cushions for increased comfort
Soft, replaceable circumaural ear pads
Color coded ear cups, right (red) left (blue)
Technical Data
Frequency response < 20 to > 20,000 HzPTB calibrated see tableTransducer principle dynamic, closedNominal impedance 40 OhmCharacterisitic SPL 100 dB at 1 kHz, 1 mWMax permanent load 500 mWCoupling circumauralCaliper pressure 10 NWeight (with cable) 330 gCable approx. 3 m, single-sided, open-ended
Connection yellow + L
black – Lred + Rwhite – RStandard SPL Passive Maximum SPL
frequencies (dB 20µPa) attenuation (<10 min. @
(Hz) @ .5 Vrms (dB) 5 V RMS)
Sennheiser Electronic Corporation One Enterprise Drive PO Box 987, Old Lyme, CT 06371
Tel: 860-434-9190 Fax: 860-434-1759 Web site: www.sennheiserusa.com
HDA200 is PTB approved. Physikalisch-TechnischeBundesanstalt, Braunschweig, Germany. PTB is equivalent tothe National Bureau of Standards.125 112.5 14.3 132 ± 3250 113.0 15.9 132 ± 3500 112.0 22.5 132 ± 3750 111.0 - 131 ± 3
1,000 108.5 28.6 129 ± 3
2,000 104.0 - 124 ± 3
3,000 104.0 32.0 124 ± 3
4,000 104.0 45.7 124 ± 3
5,000 106.5 - 127 ± 3
6,000 107.5 - 125 ± 3
8,000 105.5 43.8 125 ± 5
9,000 105.0 - 123 ± 5
10,000 102.5 - 122 ± 5
11,200 102.0 - 123 ± 5
12,500 103.0 - 118 ± 5
14,000 98.5 - 119 ± 5
16,000 100.0 - 120 ± 5
All measurements are done on a calibrated coupler
B&K 4153 (artificial ear) with the standard coneYJ0304 above the adapter plate, type DB 0843.
The pressure of the headband shall be 10N ± 1N.
The RMS input voltage to the headphone is 0.5 V.
The measurements are done with steady state sine
wave signals.
The output impedance of the signal source shall be
<1 Ohm.
Climatic conditions:
Temperature T=20
º C
Humidity H=50%relAtmospheric pressure P=approx. 100kPa
All data are influenced by temperature, humidity and static pressure.
HDA 200 Frequency Response Test Conditions
32.0
-

Manual

View the manual for the Sennheiser HDA 200 here, for free. This manual comes under the category Headphones and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Sennheiser HDA 200 or do you need help? Ask your question here

Need help?

Do you have a question about the Sennheiser and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.

Azadeh • 25-8-2021 No comments

Hi! I’m wondering if I could use this hda 200 headphones for routine audiometry; I mean 250-8000 Hz.

Answer this question

Number of questions: 1

Sennheiser HDA 200 specifications

Below you will find the product specifications and the manual specifications of the Sennheiser HDA 200.

General
Brand Sennheiser
Model HDA 200
Product Headphone
Language English
Filetype PDF
Headphones
Headphone frequency 20 - 20000 Hz
Headphone sensitivity 100 dB
Impedance 40 Ω
Driver type Dynamic
Weight & dimensions
Weight 330 g
Performance
Cable length 3 m
Product type Headset
Product colour Black
Headset type Binaural
Ports & interfaces
Connectivity technology Wired
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sennheiser HDA 200 below.

Is your question not listed? Ask your question here

No results