Seat Mii (2018) manual

Seat Mii (2018)
7.9 · 2
PDF manual
 · 256 pages
English
manualSeat Mii (2018)

Fuses and bulbs

5. Unscrew the wing nut
5
Fig. 89 B.
6.
Remove the tail light from the bodywork by
carefully pulling backwar
ds.
7.
Disassemble the tail light unit and place it on a
flat, clean surf
ace.
To change the bulb
8.
Unlock the bulb holder locking tab (arrow)
Fig. 90 C and remove the bulb holder from
the tail light.
9.
Replace the faulty bulb by a new identical bulb
Fig. 90 D.
10.
Place the bulb holder in the tail light unit. The
attachment tabs (arr
ow) should audibly click
into place
Fig. 90 C.
Assembling the rear light units
11.
Carefully insert the tail light unit into the open-
ing in the bodywork.
12.
Support the t
ail light with one hand in the as-
sembly position and securely scre
w the wing
nut with the other
5
Fig. 89 B.
13.
Ensure that the tail light unit has been correctly
fitted and is firmly secured.
14.
Insert the connector
2
into the bulb holder
and press the lock
3
on the connector in the
opposite direction t
o the arrow
Fig. 89 B.
15.
Insert the cover. The cover should lock into
place.
16. Close the rear lid
page 99.

Changing the number plate light

Fig. 91
In the rear bumper: remove the plate
light.
Fig. 92
Number plate light: detach the bulb
hol
der
.
Complete operations only in the se-
quence given:
1.
With one hand, press on the number pl
ate light
from left t
o right and remove it from the bumper
Fig. 91.
2.
Detach the number plate light carefully from
the bumper.
3.
Turn the bulb hol
der with the bulb anticlock-
wise
and remove it in the direction of the arrow
Fig. 92.
4.
Replace the faulty bulb with a new identical
bulb.
5.
Place the bulb hol
der in the number plate light
and press in the opposite dir
ection to the arrow
as far as possible
Fig. 92.
6.
Insert the number plate light carefully into the
left edge of the opening on the bumper. During
this process, check that the assembly direction
of the number plate light is correct, i.e. the
spring must be on the right.
7.
Insert the number plate light into the bumper
until it audibly clicks into place.
83

Manual

View the manual for the Seat Mii (2018) here, for free. This manual comes under the category cars and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Seat Mii (2018) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Seat and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Seat Mii (2018) specifications

Below you will find the product specifications and the manual specifications of the Seat Mii (2018).

The Seat Mii (2018) is a compact car that offers efficient performance and practicality. It is available in both three-door and five-door models, making it versatile for different needs. The exterior design of the car is modern and sleek, with smooth lines and a compact size that allows for easy maneuverability in city driving. Under the hood, the Seat Mii is powered by a range of petrol engines that provide sufficient power for urban commuting. The fuel efficiency of the car is commendable, making it an economical choice for daily use. The compact size of the Mii also allows for easy parking in tight spaces. Inside the cabin, the Seat Mii offers a comfortable and stylish environment. The seats are supportive and provide ample legroom for passengers. The dashboard layout is user-friendly, with easy-to-reach controls and intuitive technology features. In terms of safety, the Seat Mii is equipped with standard features such as airbags, stability control, and anti-lock braking system. It also offers additional safety options like parking sensors and a rearview camera. Overall, the Seat Mii (2018) is a reliable and practical option in the compact car segment. Its efficient performance, compact size, and comfortable interior make it suitable for everyday commuting. Additionally, its safety features provide peace of mind for both the driver and passengers.

General
BrandSeat
ModelMii (2018)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Seat Mii (2018) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my Seat?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the Seat Mii (2018)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my Seat need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my Seat?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How do I connect my smartphone to the car's infotainment system?

A quick way to connect your smartphone is to go to the settings menu on the infotainment screen, select the Bluetooth option, and follow the prompts to pair your device. You can then enjoy hands-free calling, music streaming, and access to your contacts.

How do I adjust the seat height?

To adjust the seat height, locate the lever on the side of the seat near the front. Pull up on the lever to release the lock, then simultaneously move your body up or down to the desired seat height. Once you find the right position, release the lever to lock the seat in place.

How can I adjust the angle of the steering wheel?

To adjust the steering wheel angle, locate the lever or handle just below the steering column. Pull the lever or push the handle and adjust the steering wheel's position up or down. Once you have set the desired angle, push the lever or handle back to lock it in place.

How do I engage the rear parking sensors?

When shifting into reverse gear, the rear parking sensors are automatically activated. You will hear a beeping sound that indicates the proximity of obstacles as you get closer to them. Keep in mind that the system is not a substitute for cautious driving, and always visually check your surroundings.

How do I activate the Hill Hold Control feature?

The Hill Hold Control feature is automatically activated when you press the brake pedal firmly while stationary on an incline. This feature prevents the car from rolling backward when you release the brake pedal. It offers you more control and peace of mind when starting on a slope.

Is the manual of the Seat Mii (2018) available in English?

Yes, the manual of the Seat Mii (2018) is available in English .

Is your question not listed? Ask your question here

No results