Seat Mii (2018) manual

Seat Mii (2018)
7.9 · 2
PDF manual
 · 256 pages
English
manualSeat Mii (2018)
The essentialsMake sure the battery clamps have sufficient
met
al
-t
o-metal contact with the battery ter-minals.If the engine fails to start after about 10 sec-onds, switch off the starter and try again afterabout 1 minute.WARNING
Please note the saf
ety warnings referring
to working in the engine compartment
page 193.
The battery providing assistance must
have the same voltage as the flat battery
(12V) and approximately the same capaci-
ty (see imprint on battery). Failure to com-
ply could result in an explosion.
Never use jump leads when one of the
batteries is frozen. Danger of explosion!
Even after the battery has thawed, battery
acid could leak and cause chemical burns.
If a battery freezes, it should be replaced.
Keep sparks, flames and lighted ciga-
rettes away from batteries, danger of ex-
plosion. Failure to comply could result in an
explosion.
Observe the instructions provided by the
manufacturer of the jump leads.
Do not connect the negative cable from
the other vehicle directly to the negative
terminal of the flat battery. The gas emit-
ted from the battery could be ignited by
sparks. Danger of explosion.
Never att
ach the negative cable to fuel
system components or the brake lines in
the other vehicle.
The non-insulated parts of the battery
clamps must not be allowed to touch. The
jump lead attached to the positive battery
terminal must not touch metal parts of the
vehicle, this can cause a short circuit.
Position the leads in such a way that they
cannot come into contact with any moving
parts in the engine compartment.
Do not lean on the batteries. This could
result in chemical burns.
Note
The vehicles must not touch each other,
otherwise electricity coul
d flow as soon as
the positive terminals are connected.

Changing the wiper blades

Windscr
een wipers service posi-
tion
Fig. 62 Wipers in service position.
The wiper arms can be raised when the wip-ers are in service position
Fig. 62.
Close the bonnet
››
page 193.
Switch the ignition on and off.
Press the windscreen wiper lever down-wards briefly
››
Fig. 33
4
.
Bef
or
e driving, always lower the wiper arms.When the ignition is switched on, the wind-screen wiper arms return to their initial posi-tion upon activating the windscreen wiperlever.
››
page 75
46

Manual

View the manual for the Seat Mii (2018) here, for free. This manual comes under the category cars and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Seat Mii (2018) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Seat and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Seat Mii (2018) specifications

Below you will find the product specifications and the manual specifications of the Seat Mii (2018).

The Seat Mii (2018) is a compact car that offers efficient performance and practicality. It is available in both three-door and five-door models, making it versatile for different needs. The exterior design of the car is modern and sleek, with smooth lines and a compact size that allows for easy maneuverability in city driving. Under the hood, the Seat Mii is powered by a range of petrol engines that provide sufficient power for urban commuting. The fuel efficiency of the car is commendable, making it an economical choice for daily use. The compact size of the Mii also allows for easy parking in tight spaces. Inside the cabin, the Seat Mii offers a comfortable and stylish environment. The seats are supportive and provide ample legroom for passengers. The dashboard layout is user-friendly, with easy-to-reach controls and intuitive technology features. In terms of safety, the Seat Mii is equipped with standard features such as airbags, stability control, and anti-lock braking system. It also offers additional safety options like parking sensors and a rearview camera. Overall, the Seat Mii (2018) is a reliable and practical option in the compact car segment. Its efficient performance, compact size, and comfortable interior make it suitable for everyday commuting. Additionally, its safety features provide peace of mind for both the driver and passengers.

General
BrandSeat
ModelMii (2018)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Seat Mii (2018) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my Seat?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the Seat Mii (2018)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my Seat need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my Seat?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How do I connect my smartphone to the car's infotainment system?

A quick way to connect your smartphone is to go to the settings menu on the infotainment screen, select the Bluetooth option, and follow the prompts to pair your device. You can then enjoy hands-free calling, music streaming, and access to your contacts.

How do I adjust the seat height?

To adjust the seat height, locate the lever on the side of the seat near the front. Pull up on the lever to release the lock, then simultaneously move your body up or down to the desired seat height. Once you find the right position, release the lever to lock the seat in place.

How can I adjust the angle of the steering wheel?

To adjust the steering wheel angle, locate the lever or handle just below the steering column. Pull the lever or push the handle and adjust the steering wheel's position up or down. Once you have set the desired angle, push the lever or handle back to lock it in place.

How do I engage the rear parking sensors?

When shifting into reverse gear, the rear parking sensors are automatically activated. You will hear a beeping sound that indicates the proximity of obstacles as you get closer to them. Keep in mind that the system is not a substitute for cautious driving, and always visually check your surroundings.

How do I activate the Hill Hold Control feature?

The Hill Hold Control feature is automatically activated when you press the brake pedal firmly while stationary on an incline. This feature prevents the car from rolling backward when you release the brake pedal. It offers you more control and peace of mind when starting on a slope.

Is the manual of the Seat Mii (2018) available in English?

Yes, the manual of the Seat Mii (2018) is available in English .

Is your question not listed? Ask your question here

No results