Schneider SL210FR manual

Schneider SL210FR
7.3 · 1
PDF manual
 · 68 pages
English
manualSchneider SL210FR
25
T
+16
0
+43
0
C
inner home temperature
3. Installation
3.1 Site
1. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
3. Install the appliance in a dry and well-ventilated place.
4. Protect the appliance from direct sunlight.
5. The doors must open completely and without hindrance.
6. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
7. Connect the appliance to the mains properly.
8. The nameplate is situated inside the appliance or at the back.
3.2 Ventilation
Minimum distances
Adjustable feet
Clockwise → down
Anti-clockwise → up
Spacers
Depending on model, the appliance is
supplied with two plastic spacers. After
installation of these spacers, the
appliance cannot be pushed against the
wall to maintain proper ventilation.
Insert the spacers into the relevant
openings on the back of the appliance,

Manual

View the manual for the Schneider SL210FR here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Schneider SL210FR or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Schneider and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Schneider SL210FR specifications

Below you will find the product specifications and the manual specifications of the Schneider SL210FR.

General
BrandSchneider
ModelSL210FR
Productrefrigerator
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Schneider SL210FR below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

Is the manual of the Schneider SL210FR available in English?

Yes, the manual of the Schneider SL210FR is available in English .

Is your question not listed? Ask your question here

No results