Schneider SL 250 R-CB A++ manual

Schneider SL 250 R-CB A++
5.3 · 1
PDF manual
 · 67 pages
English
manualSchneider SL 250 R-CB A++
15
Türen selten/kurz öffnen.
Ineffiziente Kühlleistung.
Tür wurde zu häufig geöffnet.
Tür ist nicht richtig geschlossen.
Eisablagerungen im Gerät.
Ungenügende Abstände an der
Rückwand und an den Seiten.
Im Gerät befindet sich warmes oder
heißes Kühlgut.
Gerät ist überfüllt.
Dichtung ist beschädigt.
Zu warme Temperatureinstellung am
Thermostat. Wählen Sie
gegebenenfalls eine andere
Einstellung.
Tür/Türdichtungen überprüfen.
Defekte Türdichtung austauschen
Gerät abtauen.
Starke Eisbildung.
Tür ist nicht richtig geschlossen.
Dichtung beschädigt/verunreinigt.
Türe schließen.
Die Dichtung reinigen/austauschen.
Die normalen Geräusche beim Schließen der Türverändern sich.
Die Türdichtung ist verschmutzt.
Türdichtung reinigen.
Ungewöhnliche Geräuschbildung.
Das Gerät steht nicht auf einer
flachen und geraden Oberfläche.
Das Gerät berührt eine Wand oder
einen anderen Gegenstand.
Das Kühlgut ist falsch positioniert.
Flaschen im Inneren des Geräts
vibrieren oder berühren einander.
Gegenstände sind hinter das Gerät
gefallen.
Richten Sie das Gerät neu aus.
Richten Sie das Kühlgut neu aus.
Richten Sie die Flaschen neu aus.
Entfernen Sie die Gegenstände.
Sollte das Gerät Störungen abweichend von den oben beschriebenen aufweisen,
oder falls Sie alle Punkte der Liste überprüft haben, das Problem aber nicht
behoben werden konnte, kontaktieren Sie den Kundendienst.
Die folgenden Betriebsvorgänge sind normal und
kein Anzeichen einer Fehlfunktion
Die Kühlflüssigkeit erzeugt ein Geräusch ähnlich fließenden Wassers.
Gelegentlich sind Geräusche zu hören, die durch den Einspritzvorgang in das
Kühlsystem verursacht werden.
Es ist normal, dass die Seitenwände des Geräts aufgrund des Betriebs des
Kühlkreislaufs warm werden.
Ausgeprägte Geräuschbildung
Bei Erstinbetriebnahme oder warmen Innentemperaturen. Der Kompressor
arbeitet mit hoher Leistung, um schnell die Kühltemperatur zu erreichen.
Kondenswasser im/am Gerät

Manual

View the manual for the Schneider SL 250 R-CB A++ here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Schneider SL 250 R-CB A++ or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Schneider and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Schneider SL 250 R-CB A++ specifications

Below you will find the product specifications and the manual specifications of the Schneider SL 250 R-CB A++.

General
BrandSchneider
ModelSL 250 R-CB A++ | 21250
Productrefrigerator
EAN4030608212501
LanguageEnglish
FiletypeUser manual (PDF)
Design
Appliance placementFreestanding
Product colorRed
Door hingeRight
Reversible doorsNo
Built-in displayNo
Refrigerating mediumR600a
Shelves materialTempered glass
Number of compressors1
Freezer
Freezing capacity4.5 kg/24h
Storage time during power failure17 h
Star rating4*
No Frost (freezer)No
Automatic defrost (freezer)No
Freezer number of shelves/baskets3
Freezer positionBottom-placed
Freezer net capacity74 L
Fresh zone
Fresh zone compartmentNo
Performance
Total net capacity251 L
Climate classN-ST
Noise level42 dB
Minimum operating temperature16 °C
Maximum operating temperature38 °C
Ergonomics
Adjustable feetYes
Power
A++
Power sourceElectric
Connected load- W
Annual energy consumption190 kWh
Fridge
Fridge net capacity177 L
Fridge interior lightYes
Lamp typeLED
No Frost (fridge)No
Automatic defrost (fridge)Yes
Multi-Airflow system (fridge)No
Fridge number of shelves/baskets3
Number of removable shelves3
Number of vegetable drawers1
Fridge door balconies4
Egg balconyYes
Weight & dimensions
Width546 mm
Depth626 mm
Height1815 mm
Weight60000 g
Packaging data
Package width575 mm
Package depth665 mm
Package height1863 mm
Package weight67000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Schneider SL 250 R-CB A++ below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

What is the weight of the Schneider SL 250 R-CB A++?

The Schneider SL 250 R-CB A++ has a weight of 60000 g.

What is the height of the Schneider SL 250 R-CB A++?

The Schneider SL 250 R-CB A++ has a height of 1815 mm.

What is the width of the Schneider SL 250 R-CB A++?

The Schneider SL 250 R-CB A++ has a width of 546 mm.

What is the depth of the Schneider SL 250 R-CB A++?

The Schneider SL 250 R-CB A++ has a depth of 626 mm.

Is the manual of the Schneider SL 250 R-CB A++ available in English?

Yes, the manual of the Schneider SL 250 R-CB A++ is available in English .

Is your question not listed? Ask your question here

No results