View the manual for the Scala SC 145 here, for free. This manual comes under the category inhalators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Scala SC 145 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Scala SC 145 below.
To connect the Scala SC 145 inhalator to the power source, follow these steps: 1. Locate the power cable and the socket for the power cord on the inhalator (A5). 2. Insert one end of the power cable into the socket for the power cord. 3. Plug the other end of the power cable into a suitable power outlet. 4. Ensure that the power outlet is functioning properly and has a stable power supply. 5. Turn on the inhalator by using the on/off switch (A1). 6. Verify that the power indicator light or display on the inhalator is illuminated, indicating that it is receiving power. 7. Wait for the inhalator to initialize and be ready for use. It is important to ensure that the power cable is securely connected to both the inhalator and the power outlet to avoid any power interruptions during use. Always follow the manufacturer's instructions and safety guidelines when connecting the inhalator to the power source. Please note that the steps provided are a general guide and may vary slightly depending on the specific model of the Scala SC 145 inhalator.
If the Scala SC 145 inhalator is not working properly, follow these steps to troubleshoot the issue: 1. Check the power cable connection: Ensure that the power cable is correctly inserted into the power socket of the inhalator. If it is loose or not properly connected, reinsert it securely. 2. Verify the medication insertion: Make sure that the medication is properly inserted into the nebulizer. Pour the correct amount of medication into the nebulizer according to the instructions. 3. Check the nebulizer fitting: Disassemble the nebulizer and reassemble it correctly as shown in the connection diagram on the cover of the manual. Ensure that all components are properly fitted and aligned. 4. Clean the nebulizer nozzle: If the nebulizer nozzle is clogged, disassemble the nebulizer, remove the nozzle, and perform cleaning operations as instructed in the manual. Deposits of medication can affect the efficiency and operation of the nebulizer. 5. Verify the air pipe connection: Ensure that the air pipe is correctly connected to the inhalator. Check the connection diagram on the cover of the manual for proper placement. 6. Replace the air filter: If the air filter is dirty, replace it with a new one. The air filter should be replaced when it becomes dirty or changes color. If the issue persists after following these troubleshooting steps, it is recommended to contact your trusted retailer or the nearest authorized FLAEM service center for further assistance.
To assemble the Scala SC 145 inhalator according to the provided diagram, follow these steps: 1. Start by locating the various components of the inhalator, including the nebulizer, air pipe, and power cable. 2. Take the nebulizer and ensure that it is clean and free from any debris or residue. If necessary, follow the cleaning instructions in the manual. 3. Connect the air pipe to the inhalator. Refer to the connection diagram provided in the manual to ensure the correct placement. 4. Insert the nebulizer into the designated slot on the inhalator. Make sure it is securely fitted and aligned according to the diagram. 5. Check the power cable and ensure it is in good condition. Insert one end of the power cable into the power socket on the inhalator. 6. Connect the other end of the power cable to a suitable power outlet. Ensure that the power outlet is functioning properly and has a stable power supply. 7. Once all the components are properly assembled, double-check the connections and alignment to ensure everything is in place. Please note that the steps provided are a general guide and may vary slightly depending on the specific model of the Scala SC 145 inhalator. Always refer to the provided diagram and follow the manufacturer's instructions for proper assembly.
To ensure safe usage of the Scala SC 145 inhalator, follow these important safety precautions: 1. Read the instruction manual thoroughly: Familiarize yourself with the instructions, warnings, and safety guidelines provided in the manual before using the inhalator. 2. Use the inhalator in a well-ventilated area: Ensure that there is proper airflow in the room where you are using the inhalator to prevent the accumulation of aerosolized medication. 3. Keep the inhalator away from water and moisture: Avoid exposing the inhalator to water or any other liquids to prevent damage to the electrical components and potential electrical hazards. 4. Do not operate the inhalator with wet hands: Always ensure that your hands are dry before handling the inhalator or any of its components to prevent electrical shock. 5. Use the inhalator on a stable surface: Place the inhalator on a flat and stable surface during operation to prevent accidental tipping or falling. 6. Do not block the air vents: Ensure that the air vents of the inhalator are not obstructed during use to maintain proper airflow and prevent overheating. 7. Clean and maintain the inhalator regularly: Follow the cleaning and maintenance instructions provided in the manual to keep the inhalator in optimal working condition and prevent contamination. By following these safety precautions, you can use the Scala SC 145 inhalator safely and effectively for your respiratory therapy needs.
If you experience any issues or have questions about the Scala SC 145 inhalator after purchasing it, follow these steps for assistance: 1. Contact the retailer: Reach out to the retailer from whom you purchased the Scala SC 145 inhalator. They may be able to provide guidance or troubleshoot common issues. 2. Check the manufacturer's website: Visit the official website of the manufacturer of the Scala SC 145 inhalator. Look for a support or customer service section where you can find FAQs, troubleshooting guides, or contact information. 3. Contact customer support: If you cannot find the information you need on the retailer's website or the manufacturer's website, contact the customer support team of the manufacturer. They can provide specific guidance and address any questions or concerns you may have. 4. Provide necessary details: When contacting customer support, be prepared to provide relevant information such as the model number, purchase date, and a detailed description of the issue or question you have. This will help them assist you more effectively. By following these steps, you can seek assistance and get the necessary support for any issues or questions you may have regarding the Scala SC 145 inhalator.
Yes, the manual of the Scala SC 145 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Scala and is the answer not in the manual?
Question and answer
Number of questions: 0