manual

Sanoxy WAP-300 specifications

Sanoxy WAP-300
7.8 · 1
Sanoxy WAP-300 specifications, prices, product images and videos.

General
Sanoxy
WAP-300 | WAP-300
Wifi repeater
609224104015, 816473012453, 0609224104015, 0816473012453
English
EN - 2 (PDF)
Data transmission
Maximum data transfer rate150 Mbit/s
Supported data transfer rates11 Mbps, 54 Mbps, 150 Mbps
Antenna
Antenna designIntegrated
Wireless LAN features
Modulation16-QAM,64-QAM,BPSK,CCK,DBPSK,DQPSK,DSSS,OFDM,QPSK
Frequency band2.4 GHz
Channels quantity14 channels
Ports & interfaces
InterfaceRJ 45
Connectivity technologyWireless
Ethernet LAN (RJ-45) ports1
Certificates
CertificationWi-Fi, RoHS, CE Mark (Europe), FCC (USA)
Security
Security algorithms128-bit WEP,64-bit WEP,TKIP,WPA,WPA-PSK,WPA2,WPA2-PSK
System requirements
Compatible operating systemsLinux, Linux Kernel 3.0.8, Linux 2.6.18-2.6.38, Microsoft Windows, Windows ME, Windows 98SE, Windows Vista 32/64 bit, Windows XP 32/64 bit, Windows 2000 32/64 bit, Mac OS, Mac OS 10.8, Mac OS 10.7, Mac OS 10.6, Mac OS 10.5, Mac OS 10.4
Features
LED indicators
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)5 - 95 %
Weight & dimensions
Dimensions (WxDxH)101.6 x 203.2 x 254 mm
Weight454 g
The WiFi Repeater is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. It also works well with other 11b/g and 11n protocol wireless products.

- Improves wireless coverage in all WLAN networks
- WLAN 802.11n(Draft 2.0) for wireless high-speed access
- Downward compatible with 802.11g(54Mbit/s) and 802.11b standard(11Mbit/s)
- Support 2.4GHz WLAN networks
- Maximum WLAN security with WPA2, WPA and WEP(128/64)
- Software wizard for simple setup
- Antennas integrated

WlAN access point/client according to IEEE 802.11n, g, b. 110 ~ 230-volt socket. The WLAN client must support at least the WPA encryption standard. WLAN access point and the WLAN client with automatic IP address assigment(DHCP). Forwarding of IPv4-based protocols/Address Resolution Protocol. The network name (SSID) of the WLAN access point must be set to “visible”.