Sanitas SBM 22 manual

Sanitas SBM 22
8.9 · 45
PDF manual
 · 100 pages
English
manualSanitas SBM 22

SBM 22

D
Blutdruckmessgerät
Gebrauchsanweisung .................................................... 2
G
Blood pressure monitor
Instructions for use ...................................................... 22
F
Tensiomètre
Mode d´emploi ............................................................ 41
I
Misuratore di pressione
Istruzioni per l’uso ....................................................... 60
r
Прибор для измерения кровяного давления в
плечевой артерии
Инструкция по применению .................................... 79

View the manual for the Sanitas SBM 22 here, for free. This manual comes under the category sphygmomanometer and has been rated by 45 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Sanitas SBM 22 or do you need help? Ask your question here

Need help?

Do you have a question about the Sanitas and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 9
M
mirko cumerlatoNovember 3, 2021

Hello, after a longer break and new batteries, the device no longer starts. Was in use for 1 month but 2 years or more ago. What can I do!?

Hello, after a longer break and new batteries, the device no longer starts. Was in use for 1 month but 2 years or more ago. W...
zoom-in
View photo
This message has been automatically translated
M
Molnár JózsefJanuary 2, 2024

I would need the user manual for the SANITAS SBM 42 type blood pressure monitor.

I would need the user manual for the SANITAS SBM 42 type blood pressure monitor.
zoom-in
View photo
This message has been automatically translated
P
Petra Ehlers January 2, 2021

Can the device be turned off in such a way that it does not consume any battery?

This message has been automatically translated
M
MariaOctober 11, 2021

How do I set the time?

How do I set the time?
zoom-in
View photo
This message has been automatically translated
S
Stefania StancuNovember 4, 2021

How do I set the time on the Sanitas SBM 22 blood pressure monitor?

This message has been automatically translated
C
ciur lucianMay 21, 2021

nu mai arata tensiunea....se ridica presiunea pana la 205 si scade pana la 185 si iar creste si scade

1 comment
M
MadhuSeptember 14, 2022

Does the instrument require periodic calibration. If required how is it done

M
Margaret HallJanuary 30, 2023

How do you set the machine

V
Vitale BaranFebruary 26, 2024

What is Error 3?

G
Giacomo MainardiJuly 16, 2020

come regolare lora

1 comment
V
Vlado MarkovićMay 20, 2021

Priručnik za upotrebu tlakomjera Sanitsa SBM 22

The Sanitas SBM 22 sphygmomanometer is an automatic blood pressure monitor designed for use on the upper arm. It accurately measures mean arterial pressure, pulse rate, diastolic blood pressure, and systolic blood pressure. Featuring a bright LED display, the device provides clear and easy-to-read measurements. Its compact dimensions of 103 millimeters in width, 134 millimeters in depth, and 60 millimeters in height make it portable and convenient for travel. The Sanitas SBM 22 sphygmomanometer is sold individually, with one unit provided per pack. It is equipped with four AA batteries, ensuring immediate use upon receipt. Crafted with high-quality materials, this blood pressure monitor guarantees longevity and dependability. Its automatic functionality allows for effortless and precise measurements, without the need for manual pumping or adjustment. The Sanitas SBM 22 sphygmomanometer is suitable for individuals seeking a reliable and accurate blood pressure monitoring device. Its user-friendly interface and clear LED display make it accessible to people of all ages. Please note that the information provided is based solely on the given specifications, and no subjective evaluation or conclusion is drawn regarding the product's performance or overall quality.

General
BrandSanitas
ModelSBM 22 | 658.25
Productsphygmomanometer
EAN4211125658250
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAutomatic
Placement supportedUpper arm
Mean arterial pressureYes
Pulse rate measuringYes
Diastolic blood pressureYes
Systolic blood pressureYes
Speaking function-
Cuff size22 - 33 cm
Arrhythmia detectionYes
Product colorWhite
Clock/Date displayYes
Auto power offYes
2
Memory functionYes
Display
Display typeLED
Weight & dimensions
Width103 mm
Depth134 mm
Height60 mm
Packaging data
Quantity per pack1 pc(s)
Packaging content
Batteries includedYes
Carrying caseYes
Power
Number of batteries supported4
Battery typeAA
Battery voltage1.5 V
Battery low indicationYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sanitas SBM 22 below.

What does systolic pressure mean?

Systolic pressure is the top number that the blood pressure monitor will indicate. Systolic pressure refers to the amount of pressure in your arteries during the contraction of your heart muscle.

What does diastolilc pressure mean?

Diastolic pressure is the lowest number that the blood pressure monitor will indicate. The bottom number refers to your blood pressure when your heart muscle is between beats.

What is a normal blood pressure?

A normal blood pressure is about 120/80.

What is the height of the Sanitas SBM 22?

The Sanitas SBM 22 has a height of 60 mm.

What is the width of the Sanitas SBM 22?

The Sanitas SBM 22 has a width of 103 mm.

What is the depth of the Sanitas SBM 22?

The Sanitas SBM 22 has a depth of 134 mm.

Does Sanitas SBM 22 measure mean arterial pressure?

Yes, Sanitas SBM 22 does measure mean arterial pressure. This is a useful feature as it provides a more comprehensive understanding of the user's blood pressure and cardiovascular health.

Can Sanitas SBM 22 measure pulse rate?

Yes, Sanitas SBM 22 can measure pulse rate. This is important for monitoring heart rate and overall cardiovascular health.

Does Sanitas SBM 22 display diastolic blood pressure?

Yes, Sanitas SBM 22 displays diastolic blood pressure. This allows users to monitor the lower range of their blood pressure readings.

Can Sanitas SBM 22 display systolic blood pressure?

Yes, Sanitas SBM 22 can display systolic blood pressure. This is essential for monitoring the higher range of blood pressure readings.

Does Sanitas SBM 22 have a low battery indication?

Yes, Sanitas SBM 22 has a low battery indication. This is a convenient feature that alerts users when the batteries need to be replaced, ensuring uninterrupted usage and accurate readings.

How do I properly position the cuff on my Sanitas SBM 22 sphygmomanometer?

To properly position the cuff on your Sanitas SBM 22 sphygmomanometer, follow these steps: 1. Sit upright and comfortably in a chair, with your back supported and your feet flat on the floor. 2. Place your arm on a surface, such as a table, with your palm facing up. 3. Insert the cuff line into the connection for the cuff connector on the device. 4. Position the cuff on your upper arm, ensuring that the bottom edge of the cuff is positioned 2-3 cm above your elbow and over the artery. 5. The line on the cuff should point towards the center of your palm. 6. Tighten the free end of the cuff, making sure it is snug but not too tight. The cuff should be fastened so that two fingers can fit under it. 7. Check that the cuff is at heart level to ensure accurate measurements. 8. Remain as still as possible during the measurement and avoid speaking. 9. Press the Start/Stop button on the device to start the blood pressure measurement. 10. Wait for the measurement to complete and observe the displayed systolic pressure, diastolic pressure, and pulse rate measurements. Remember to consult the manual for any specific instructions or additional information related to the Sanitas SBM 22 sphygmomanometer.

Why am I getting inconsistent blood pressure readings with my Sanitas SBM 22 sphygmomanometer?

Inconsistent blood pressure readings with the Sanitas SBM 22 sphygmomanometer can be caused by various factors. Here are some possible reasons: 1. Incorrect cuff positioning: Ensure that the cuff is positioned correctly on your upper arm, with the bottom edge of the cuff 2-3 cm above your elbow and over the artery. Make sure the cuff is neither too tight nor too loose. 2. Movement during measurement: Remain as still as possible during the measurement. Any movement or talking can affect the accuracy of the readings. 3. Cuff size: Ensure that you are using the correct cuff size for your arm. Using an improperly sized cuff can lead to inaccurate readings. 4. Irregular heart rhythm: The device can detect irregularities in your pulse signal during blood pressure measurement. If the device indicates an irregular pulse symbol, it may be a sign of arrhythmia. Consult your doctor for further evaluation. 5. Fluctuations in blood pressure: Blood pressure naturally fluctuates throughout the day. Taking measurements under different conditions or at different times can result in inconsistent readings. Remember to follow the instructions provided in the manual for proper usage and consult your healthcare professional if you have concerns about your blood pressure readings.

How do I change the language settings on my Sanitas SBM 22 sphygmomanometer?

To change the language settings on your Sanitas SBM 22 sphygmomanometer, follow these steps: 1. Before initial use or after replacing the batteries, the device will automatically take you to the relevant menu. If the batteries have already been inserted, switch off the device and press and hold the settings button (SET) for approximately 5 seconds. 2. In the menu, you can adjust various settings. The hour format will be the first option displayed. 3. Use the +/- setting buttons to select your desired hour format and confirm your choice with the SET memory button. 4. The next option is the date. The year will be flashing on the display. 5. Use the +/- setting buttons to select your desired year and confirm with the SET memory button. 6. The month will then flash on the display. Select your desired month using the +/- setting buttons and confirm with the SET memory button. 7. The day will flash on the display. Select your desired day using the +/- setting buttons and confirm with the SET memory button. 8. The time settings will follow a similar process. The hour will flash on the display, and you can select your desired number using the +/- setting buttons and confirm with the SET memory button. 9. The minute will then flash on the display. Select your desired number using the +/- setting buttons and confirm with the SET memory button. 10. Once you have adjusted the language settings, the device will automatically turn off. Please note that these instructions are specific to the Sanitas SBM 22 sphygmomanometer.

Why is my Sanitas SBM 22 sphygmomanometer not turning on?

If your Sanitas SBM 22 sphygmomanometer is not turning on, you can try the following steps: 1. Check the batteries: Ensure that the batteries are properly inserted into the device and that they have sufficient charge. If the batteries are low or depleted, replace them with new ones. 2. Battery polarity: Make sure that the batteries are inserted with the correct polarity (+/-) as indicated inside the battery compartment. 3. Battery contacts: Check the battery contacts inside the device for any dirt, corrosion, or debris. If necessary, clean the contacts with a dry cloth or cotton swab. 4. Reset the device: If the device is unresponsive, you can try resetting it. Remove the batteries from the device and wait for a few minutes before reinserting them. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Sanitas customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if needed. Please note that these steps are general recommendations and may vary depending on the specific model of the Sanitas SBM 22 sphygmomanometer.

How do I calibrate my Sanitas SBM 22 sphygmomanometer for accurate readings?

To calibrate your Sanitas SBM 22 sphygmomanometer for accurate readings, follow these steps: 1. Attach the cuff: Pass your bare upper arm through the tube-shaped cuff. Position the bottom edge of the cuff 2-3 cm above your elbow and over the artery. The line on the cuff should point towards the center of your palm. Tighten the cuff, ensuring it is snug but not too tight. The cuff should be fastened so that two fingers can fit under it. 2. Adopt the correct posture: Sit upright and comfortably in a chair with your back supported and feet flat on the floor. Place your arm on a surface, such as a table, with your palm facing up. Make sure the cuff is at heart level. 3. Perform the measurement: Press the Start/Stop button on the device to start the blood pressure measurement. Remain as still as possible during the measurement and avoid speaking. The cuff will inflate automatically, and the device will display the systolic pressure, diastolic pressure, and pulse rate measurements. 4. Repeat measurements: If you are unsure of the measured value or want to take multiple measurements, wait for at least 1 minute between each measurement. It is important to note that calibration is not typically required for sphygmomanometers. However, following these steps will help ensure accurate readings.

Is the manual of the Sanitas SBM 22 available in English?

Yes, the manual of the Sanitas SBM 22 is available in English .

Is your question not listed? Ask your question here

No results